[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20131106212747.GA23133@phenom.dumpdata.com>
Date: Wed, 6 Nov 2013 16:27:47 -0500
From: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
To: xen-devel@...ts.xenproject.org, linux-kernel@...r.kernel.org
Cc: Jan Beulich <JBeulich@...e.com>,
Boris Ostrovsky <boris.ostrovsky@...cle.com>,
David Vrabel <david.vrabel@...rix.com>,
Mukesh Rathor <mukesh.rathor@...cle.com>
Subject: Re: [PATCH] xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG
areas.
Resending it to LKML.
On Wed, Nov 06, 2013 at 03:32:23PM -0500, Konrad Rzeszutek Wilk wrote:
> The PCI MMCONFIG area is usually reserved via the E820 so the Xen hypervisor
> is aware of these regions. But they can also be enumerated in the ACPI
> DSDT which means the hypervisor won't know of them until the initial
> domain informs it of via PHYSDEVOP_pci_mmcfg_reserved.
>
> This is what this patch does for all of the MCFG regions that the
> initial domain is aware of (E820 enumerated and ACPI).
>
> Reported-by: Santosh Jodh <Santosh.Jodh@...rix.com>
> CC: Jan Beulich <JBeulich@...e.com>
> CC: Boris Ostrovsky <boris.ostrovsky@...cle.com>
> CC: David Vrabel <david.vrabel@...rix.com>
> CC: Mukesh Rathor <mukesh.rathor@...cle.com>
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
> [v1: Redid it a bit]
> [v2: Dropped the P2M 1-1 setting]
> [v3: Check for Xen in-case we are running under baremetal]
> ---
> drivers/xen/pci.c | 45 +++++++++++++++++++++++++++++++++++++++++
> include/xen/interface/physdev.h | 11 ++++++++++
> 2 files changed, 56 insertions(+)
>
> diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
> index 18fff88..0331fe9 100644
> --- a/drivers/xen/pci.c
> +++ b/drivers/xen/pci.c
> @@ -26,6 +26,7 @@
> #include <asm/xen/hypervisor.h>
> #include <asm/xen/hypercall.h>
> #include "../pci/pci.h"
> +#include <asm/pci_x86.h>
>
> static bool __read_mostly pci_seg_supported = true;
>
> @@ -192,3 +193,47 @@ static int __init register_xen_pci_notifier(void)
> }
>
> arch_initcall(register_xen_pci_notifier);
> +
> +static int __init xen_mcfg_late(void)
> +{
> + struct pci_mmcfg_region *cfg;
> + int rc;
> +
> + if (!xen_initial_domain())
> + return 0;
> +
> + if ((pci_probe & PCI_PROBE_MMCONF) == 0)
> + return 0;
> +
> + if (list_empty(&pci_mmcfg_list))
> + return 0;
> +
> + /* Check whether they are in the right area. */
> + list_for_each_entry(cfg, &pci_mmcfg_list, list) {
> + struct physdev_pci_mmcfg_reserved r;
> +
> + r.address = cfg->address;
> + r.segment = cfg->segment;
> + r.start_bus = cfg->start_bus;
> + r.end_bus = cfg->end_bus;
> + r.flags = XEN_PCI_MMCFG_RESERVED;
> +
> + rc = HYPERVISOR_physdev_op(PHYSDEVOP_pci_mmcfg_reserved, &r);
> + switch (rc) {
> + case 0:
> + case -ENOSYS:
> + continue;
> +
> + default:
> + pr_warn("Failed to report MMCONFIG reservation"
> + " state for %s to hypervisor"
> + " (%d)\n",
> + cfg->name, rc);
> + }
> + }
> + return 0;
> +}
> +/*
> + * Needs to be done after acpi_init which are subsys_initcall.
> + */
> +subsys_initcall_sync(xen_mcfg_late);
> diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
> index 7000bb1..42721d1 100644
> --- a/include/xen/interface/physdev.h
> +++ b/include/xen/interface/physdev.h
> @@ -231,6 +231,17 @@ struct physdev_get_free_pirq {
> #define XEN_PCI_DEV_VIRTFN 0x2
> #define XEN_PCI_DEV_PXM 0x4
>
> +#define XEN_PCI_MMCFG_RESERVED 0x1
> +
> +#define PHYSDEVOP_pci_mmcfg_reserved 24
> +struct physdev_pci_mmcfg_reserved {
> + uint64_t address;
> + uint16_t segment;
> + uint8_t start_bus;
> + uint8_t end_bus;
> + uint32_t flags;
> +};
> +
> #define PHYSDEVOP_pci_device_add 25
> struct physdev_pci_device_add {
> /* IN */
> --
> 1.8.3.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists