[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.12.0-00186-gd3516a7 (kbuild@jaketown) (gcc version 4.8.1 (Debian 4.8.1-8) ) #2 SMP Tue Nov 12 15:33:51 CST 2013 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdac0-0x000fdacf] mapped at [780fdac0] [ 0.000000] mpc: fdad0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff] [ 0.000000] Base memory trampoline at [7809b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e000000-0x0e3fffff] [ 0.000000] [mem 0x0e000000-0x0e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x08000000-0x0dffffff] [ 0.000000] [mem 0x08000000-0x0dffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x07ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0fffdfff] [ 0.000000] [mem 0x0e400000-0x0fbfffff] page 2M [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x01e81000, 0x01e81fff] PGTABLE [ 0.000000] BRK [0x01e82000, 0x01e83fff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128404(97%) [ 0.000000] RAMDISK: [mem 0x0e73f000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [ 0.000000] BRK [0x01e84000, 0x01e84fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 61438 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffff9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 331 pages/cpu @85aa9000 s1340296 r0 d15480 u1355776 [ 0.000000] pcpu-alloc: s1340296 r0 d15480 u1355776 alloc=331*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr daab7c0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64924 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-j7-11082318/wfg:fix-blkg_stat_init/.vmlinuz-d3516a7318f8e22f5462888fdf9edc8f0f128024-20131112153423-22-athens branch=wfg/fix-blkg_stat_init BOOT_IMAGE=/kernel/i386-randconfig-j7-11082318/d3516a7318f8e22f5462888fdf9edc8f0f128024/vmlinuz-3.12.0-00186-gd3516a7 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 194064K/261744K available (14067K kernel code, 1182K rwdata, 5916K rodata, 1944K init, 5976K bss, 67680K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffa95000 - 0xfffff000 (5544 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0x887fe000 - 0xff3fe000 (1900 MB) [ 0.000000] lowmem : 0x78000000 - 0x87ffe000 ( 255 MB) [ 0.000000] .init : 0x796ae000 - 0x79894000 (1944 kB) [ 0.000000] .data : 0x78fbd05b - 0x796adb00 (7106 kB) [ 0.000000] .text : 0x78200000 - 0x78fbd05b (14068 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=8540c000 soft=8540e000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3807 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2893.018 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 5786.03 BogoMIPS (lpj=2893018) [ 0.003456] pid_max: default: 4096 minimum: 301 [ 0.004214] Security Framework initialized [ 0.004958] AppArmor: AppArmor disabled by boot time parameter [ 0.005000] Mount-cache hash table entries: 512 [ 0.005000] Initializing cgroup subsys memory [ 0.005000] Initializing cgroup subsys devices [ 0.005000] Initializing cgroup subsys blkio [ 0.005000] Initializing cgroup subsys net_prio [ 0.005000] mce: CPU supports 10 MCE banks [ 0.005000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.005000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.005000] tlb_flushall_shift: 6 [ 0.010418] Freeing SMP alternatives memory: 52K (79894000 - 798a1000) [ 0.019234] ACPI: Core revision 20130725 [ 0.025113] ACPI: All ACPI Tables successfully acquired [ 0.026406] Getting VERSION: 50014 [ 0.027020] Getting VERSION: 50014 [ 0.027624] Getting ID: 0 [ 0.028021] Getting ID: f000000 [ 0.028571] Getting LVT0: 8700 [ 0.029014] Getting LVT1: 8400 [ 0.029563] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.031082] enabled ExtINT on CPU#0 [ 0.033533] ENABLING IO-APIC IRQs [ 0.034015] init IO_APIC IRQs [ 0.034539] apic 0 pin 0 not connected [ 0.035026] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.036051] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.037154] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.038041] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.039041] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.040039] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.041036] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.042035] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.043035] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.044038] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.045039] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.046039] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.047039] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.048038] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.049039] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.050032] apic 0 pin 16 not connected [ 0.051006] apic 0 pin 17 not connected [ 0.051673] apic 0 pin 18 not connected [ 0.052006] apic 0 pin 19 not connected [ 0.053006] apic 0 pin 20 not connected [ 0.053649] apic 0 pin 21 not connected [ 0.054006] apic 0 pin 22 not connected [ 0.055006] apic 0 pin 23 not connected [ 0.056180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057005] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.059006] Using local APIC timer interrupts. [ 0.059006] calibrating APIC timer ... [ 0.061000] ... lapic delta = 6374906 [ 0.061000] ... PM-Timer delta = 365166 [ 0.061000] APIC calibration not consistent with PM-Timer: 102ms instead of 100ms [ 0.061000] APIC delta adjusted to PM-Timer: 6249002 (6374906) [ 0.061000] TSC delta adjusted to PM-Timer: 289294920 (295123588) [ 0.061000] ..... delta 6249002 [ 0.061000] ..... mult: 268392592 [ 0.061000] ..... calibration result: 999840 [ 0.061000] ..... CPU clock speed is 2892.0949 MHz. [ 0.061000] ..... host bus clock speed is 999.0840 MHz. [ 0.061109] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.067629] CPU 1 irqstacks, hard=85526000 soft=85528000 [ 0.068005] smpboot: Booting Node 0, Processors # 1 OK [ 0.002000] Initializing CPU#1 [ 0.003000] kvm-clock: cpu 1, msr 0:fffd041, secondary cpu clock [ 0.003000] masked ExtINT on CPU#1 [ 0.085171] Brought up 2 CPUs [ 0.086006] smpboot: Total of 2 processors activated (11572.07 BogoMIPS) [ 0.085081] KVM setup async PF for cpu 1 [ 0.085081] kvm-stealtime: cpu 1, msr dbf67c0 [ 0.091373] devtmpfs: initialized [ 0.094134] EVM: security.selinux [ 0.094717] EVM: security.SMACK64 [ 0.095004] EVM: security.ima [ 0.095516] EVM: security.capability [ 0.097890] xor: measuring software checksum speed [ 0.108007] pIII_sse : 8044.000 MB/sec [ 0.118007] prefetch64-sse: 8896.000 MB/sec [ 0.118792] xor: using function: prefetch64-sse (8896.000 MB/sec) [ 0.120250] regulator-dummy: no parameters [ 0.121344] NET: Registered protocol family 16 [ 0.123767] cpuidle: using governor ladder [ 0.124006] cpuidle: using governor menu [ 0.126398] ACPI: bus type PCI registered [ 0.127056] dca service started, version 1.12.1 [ 0.127890] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0 [ 0.160179] bio: create slab at 0 [ 0.178011] raid6: mmxx1 2515 MB/s [ 0.195018] raid6: mmxx2 2828 MB/s [ 0.212014] raid6: sse1x1 2187 MB/s [ 0.229014] raid6: sse1x2 2792 MB/s [ 0.246015] raid6: sse2x1 4382 MB/s [ 0.263011] raid6: sse2x2 5523 MB/s [ 0.263673] raid6: using algorithm sse2x2 (5523 MB/s) [ 0.264005] raid6: using intx1 recovery algorithm [ 0.265545] ACPI: Added _OSI(Module Device) [ 0.266006] ACPI: Added _OSI(Processor Device) [ 0.267006] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.268005] ACPI: Added _OSI(Processor Aggregator Device) [ 0.272055] ACPI: EC: Look up EC in DSDT [ 0.282403] ACPI: Interpreter enabled [ 0.283020] ACPI: (supports S0 S5) [ 0.283585] ACPI: Using IOAPIC for interrupt routing [ 0.284068] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.304359] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.305014] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.307525] PCI host bridge to bus 0000:00 [ 0.308008] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.309007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.310007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.311006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.312007] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.313097] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.315510] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.317667] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.323008] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [ 0.326627] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.328350] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.329023] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.331438] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.334019] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.337019] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.349023] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.351517] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.354008] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.357007] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.366012] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.368584] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.371008] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.374008] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.384808] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.387007] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.390007] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 0.401008] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.403886] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.406008] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 0.417275] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.420008] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 0.422008] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 0.433444] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.436007] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 0.439007] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 0.449595] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.452008] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.455007] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 0.465771] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.467486] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [ 0.475045] pci_bus 0000:00: on NUMA node 0 [ 0.477503] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.478617] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.480328] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.481638] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.483033] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.485000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.485017] ACPI: \_SB_.PCI0: notify handler is installed [ 0.486000] Found 1 acpi root devices [ 0.491184] SCSI subsystem initialized [ 0.491910] libata version 3.00 loaded. [ 0.492206] ACPI: bus type USB registered [ 0.493084] usbcore: registered new interface driver usbfs [ 0.494049] usbcore: registered new interface driver hub [ 0.496080] usbcore: registered new device driver usb [ 0.498018] pps_core: LinuxPPS API ver. 1 registered [ 0.498880] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.499039] PTP clock support registered [ 0.500243] wmi: Mapper loaded [ 0.501067] PCI: Using ACPI for IRQ routing [ 0.501789] PCI: pci_cache_line_size set to 64 bytes [ 0.503083] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.504011] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.505683] NET: Registered protocol family 23 [ 0.506122] Bluetooth: Core ver 2.16 [ 0.507047] NET: Registered protocol family 31 [ 0.508005] Bluetooth: HCI device and connection manager initialized [ 0.509024] Bluetooth: HCI socket layer initialized [ 0.510016] Bluetooth: L2CAP socket layer initialized [ 0.511043] Bluetooth: SCO socket layer initialized [ 0.511852] NET: Registered protocol family 8 [ 0.512005] NET: Registered protocol family 20 [ 0.513073] NetLabel: Initializing [ 0.514004] NetLabel: domain hash size = 128 [ 0.514757] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.515133] NetLabel: unlabeled traffic allowed by default [ 0.516006] nfc: nfc_init: NFC Core ver 0.1 [ 0.517112] NET: Registered protocol family 39 [ 0.520012] Switched to clocksource kvm-clock [ 0.521286] FS-Cache: Loaded [ 0.522050] CacheFiles: Loaded [ 0.522725] pnp: PnP ACPI init [ 0.523312] ACPI: bus type PNP registered [ 0.524134] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.525617] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.526852] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.528310] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.529533] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.531061] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.532294] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.533667] pnp 00:03: [dma 2] [ 0.534304] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.535542] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.537047] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.538272] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.539767] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.541581] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.543136] pnp: PnP ACPI: found 7 devices [ 0.543818] ACPI: bus type PNP unregistered [ 0.580791] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.581749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.582708] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.583784] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.585207] NET: Registered protocol family 2 [ 0.586731] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.588034] TCP bind hash table entries: 2048 (order: 4, 90112 bytes) [ 0.589280] TCP: Hash tables configured (established 2048 bind 2048) [ 0.590514] TCP: reno registered [ 0.591108] UDP hash table entries: 128 (order: 1, 12288 bytes) [ 0.592127] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes) [ 0.593573] NET: Registered protocol family 1 [ 0.596613] RPC: Registered named UNIX socket transport module. [ 0.597652] RPC: Registered udp transport module. [ 0.598476] RPC: Registered tcp transport module. [ 0.599322] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.600420] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.601579] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.602606] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.603718] pci 0000:00:02.0: Boot video device [ 0.604629] PCI: CLS 0 bytes, default 64 [ 0.605786] Unpacking initramfs... [ 2.110209] Freeing initrd memory: 25284K (8673f000 - 87ff0000) [ 2.112355] kvm: no hardware support [ 2.113187] Machine check injector initialized [ 2.114891] cryptomgr_test (24) used greatest stack depth: 7364 bytes left [ 2.116420] PCLMULQDQ-NI instructions are not detected. [ 2.117209] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [ 2.120506] Initializing RT-Tester: OK [ 2.121679] audit: initializing netlink socket (disabled) [ 2.122584] type=2000 audit(1384246635.442:1): initialized [ 2.124164] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.125821] VFS: Disk quotas dquot_6.5.2 [ 2.126607] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.128650] DLM installed [ 2.131203] FS-Cache: Netfs 'nfs' registered for caching [ 2.133372] Key type cifs.spnego registered [ 2.134091] Key type cifs.idmap registered [ 2.134915] JFS: nTxBlock = 1714, nTxLock = 13712 [ 2.137105] 9p: Installing v9fs 9p2000 file system support [ 2.137984] FS-Cache: Netfs '9p' registered for caching [ 2.138965] NILFS version 2 loaded [ 2.139497] OCFS2 1.5.0 [ 2.140315] ocfs2: Registered cluster interface o2cb [ 2.141073] OCFS2 DLMFS 1.5.0 [ 2.141749] OCFS2 User DLM kernel interface loaded [ 2.142495] OCFS2 Node Manager 1.5.0 [ 2.143405] OCFS2 DLM 1.5.0 [ 2.144397] bio: create slab at 1 [ 2.145831] Btrfs loaded, debug=on, assert=on [ 2.146515] btrfs: selftest: Running btrfs free space cache tests [ 2.147429] btrfs: selftest: Running extent only tests [ 2.148275] btrfs: selftest: Running bitmap only tests [ 2.149175] btrfs: selftest: Running bitmap and extent tests [ 2.150110] btrfs: selftest: Free space cache tests finished [ 2.151935] GFS2 installed [ 2.160641] NET: Registered protocol family 38 [ 2.161438] Key type asymmetric registered [ 2.162243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.163507] io scheduler noop registered (default) [ 2.164289] io scheduler deadline registered [ 2.165126] io scheduler cfq registered [ 2.165700] list_sort_test: start testing list_sort() [ 2.167163] test_string_helpers: Running tests... [ 2.174242] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1 [ 2.174982] crc32: self tests passed, processed 225944 bytes in 3048885 nsec [ 2.179299] crc32c: CRC_LE_BITS = 1 [ 2.179828] crc32c: self tests passed, processed 225944 bytes in 1682319 nsec [ 2.181547] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.182434] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 [ 2.183520] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.184989] rivafb_setup START [ 2.185672] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 2.187050] no IO addresses supplied [ 2.188459] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 2.190554] usbcore: registered new interface driver smscufx [ 2.191908] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.193055] ACPI: Power Button [PWRF] [ 2.194229] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 2.195676] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.221285] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.224406] Cyclades driver 2.6 [ 2.225088] MOXA Intellio family driver version 6.0k [ 2.225946] Initializing Nozomi driver 2.1d [ 2.226706] RocketPort device driver module, version 2.09, 12-June-2003 [ 2.227705] No rocketport ports found; unloading driver [ 2.228554] SyncLink GT [ 2.229041] SyncLink GT, tty major#247 [ 2.229695] SyncLink GT no devices found [ 2.230269] SyncLink MultiPort driver $Revision: 4.38 $ [ 2.257285] SyncLink MultiPort driver $Revision: 4.38 $, tty major#246 [ 2.258411] SyncLink serial driver $Revision: 4.38 $ [ 2.281202] SyncLink serial driver $Revision: 4.38 $, tty major#245 [ 2.282911] lp: driver loaded but no devices found [ 2.283651] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 2.284707] ac.o: No PCI boards found. [ 2.285284] ac.o: For an ISA board you must supply memory and irq parameters. [ 2.286304] toshiba: not a supported Toshiba laptop [ 2.287048] ppdev: user-space parallel port driver [ 2.287853] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 2.288969] platform pc8736x_gpio.0: no device found [ 2.289851] nsc_gpio initializing [ 2.290413] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 2.291679] Hangcheck: Using getrawmonotonic(). [ 2.292572] [drm] Initialized drm 1.1.0 20060810 [ 2.293630] [drm] radeon kernel modesetting enabled. [ 2.295134] parport_pc 00:04: reported by Plug and Play ACPI [ 2.296130] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [ 2.298231] lp0: using parport0 (interrupt-driven). [ 2.299824] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 2.300967] dummy-irq: no IRQ given. Use irq=N [ 2.301761] lkdtm: No crash points registered, enable through debugfs [ 2.302843] Phantom Linux Driver, version n0.9.8, init OK [ 2.303966] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 2.305300] c2port c2port0: C2 port uc added [ 2.305960] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 2.307445] Guest personality initialized and is inactive [ 2.308527] VMCI host device registered (name=vmci, major=10, minor=59) [ 2.309556] Initialized host personality [ 2.310694] usbcore: registered new interface driver viperboard [ 2.313177] Loading iSCSI transport class v2.0-870. [ 2.315497] iscsi: registered transport (tcp) [ 2.316587] Adaptec aacraid driver 1.2-0[30200]-ms [ 2.318288] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0 [ 2.319589] scsi: Detection failed (no card) [ 2.322185] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 2.323121] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) [ 2.325804] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 2.326740] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:3) [ 2.330506] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 2.332899] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2.737972] DC390: clustering now enabled by default. If you get problems load [ 2.739204] with "disable_clustering=1" and report to maintainers [ 2.740340] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 [ 2.741476] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 2.742540] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 2.743661] imm: Version 2.05 (for Linux 2.4.0) [ 2.745050] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012) [ 2.746342] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 2.747230] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 2.748236] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 2.749461] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 2.750518] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) [ 2.751499] iscsi: registered transport (cxgb3i) [ 2.752279] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4 [ 2.753149] iscsi: registered transport (cxgb4i) [ 2.753937] iscsi: registered transport (be2iscsi) [ 2.754718] In beiscsi_module_init, tt=7960ed3c [ 2.755614] esas2r: driver will not be loaded because no ATTO esas2r devices were found [ 2.757341] SCSI Media Changer driver v0.25 [ 2.761959] scsi_debug: host protection [ 2.762606] scsi0 : scsi_debug, version 1.82 [20100324], dev_size_mb=8, opts=0x0 [ 2.764662] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5 [ 2.766716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.767650] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB) [ 2.769191] sd 0:0:0:0: [sda] Write Protect is off [ 2.769888] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08 [ 2.771498] SSFDC read-only Flash Translation layer [ 2.779112] device id = 2440 [ 2.779608] device id = 2480 [ 2.780101] device id = 24c0 [ 2.780560] device id = 24d0 [ 2.781050] device id = 25a1 [ 2.781507] device id = 2670 [ 2.782121] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 2.783202] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 2.783984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.785659] pmc551: not detected [ 2.789491] Spectra MTD driver built on Nov 12 2013 @ 15:28:09 [ 2.792237] INFO: trying to register non-static key. [ 2.793025] the code is fine but needs lockdep annotation. [ 2.793025] turning off the locking correctness validator. [ 2.793025] CPU: 1 PID: 96 Comm: kworker/u4:1 Not tainted 3.12.0-00186-gd3516a7 #2 [ 2.793025] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 2.793025] Workqueue: events_unbound async_run_entry_fn [ 2.793025] 7828d55b 00000000 7f3a7968 78fa76a8 799d624c 7f3a79a0 78288323 7938b281 [ 2.793025] 7938b2db 7938b2b1 87817708 00000000 00000011 40352011 0000a785 87817220 [ 2.793025] 87817220 85d3e540 00000000 7f3a79cc 78288faa 00000000 00000001 00000000 [ 2.793025] Call Trace: [ 2.793025] [<7828d55b>] ? console_unlock+0x353/0x380 [ 2.793025] [<78fa76a8>] dump_stack+0x48/0x60 [ 2.793025] [<78288323>] __lock_acquire.isra.26+0x7e3/0xceb [ 2.793025] [<78288faa>] lock_acquire+0x71/0x9a [ 2.793025] [<785fc420>] ? blk_throtl_bio+0x1c3/0x485 [ 2.793025] [<785fb001>] throtl_update_dispatch_stats+0x7c/0x153 [ 2.793025] [<785fc420>] ? blk_throtl_bio+0x1c3/0x485 [ 2.793025] [<785fc420>] blk_throtl_bio+0x1c3/0x485 [ 2.793025] [<7827b5de>] ? sched_clock_local+0x17/0x106 [ 2.793025] [<7827b870>] ? sched_clock_cpu+0x105/0x113 [ 2.793025] [<785ea9f2>] generic_make_request_checks+0x3bb/0x3d2 [ 2.793025] [<7827b870>] ? sched_clock_cpu+0x105/0x113 [ 2.793025] [<785ec187>] generic_make_request+0xf/0xb5 [ 2.793025] [<785ec292>] submit_bio+0x65/0xd2 [ 2.793025] [<78313f8d>] _submit_bh+0x226/0x243 [ 2.793025] [<78313fb4>] submit_bh+0xa/0xc [ 2.793025] [<78314f86>] block_read_full_page+0x2a8/0x2c3 [ 2.793025] [<78317c1e>] ? bio_dirty_fn+0x68/0x68 [ 2.793025] [<782c78b6>] ? __pagevec_lru_add+0xf/0x11 [ 2.793025] [<782c78fd>] ? __lru_cache_add+0x45/0x5b [ 2.793025] [<78317eb4>] ? blkdev_write_begin+0x20/0x20 [ 2.793025] [<78317ec3>] blkdev_readpage+0xf/0x11 [ 2.793025] [<782be517>] do_read_cache_page+0x6e/0x11b [ 2.793025] [<782bf225>] read_cache_page_async+0x19/0x1e [ 2.793025] [<78317eb4>] ? blkdev_write_begin+0x20/0x20 [ 2.793025] [<782bf256>] read_cache_page+0xb/0x12 [ 2.793025] [<785f61b2>] read_dev_sector+0x26/0x61 [ 2.793025] [<785f6c00>] read_lba+0xae/0xf9 [ 2.793025] [<782e4686>] ? kmem_cache_alloc+0xf9/0x12b [ 2.793025] [<785f7130>] efi_partition+0x17a/0x9c0 [ 2.828652] No valid DiskOnChip devices found [ 2.828684] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 2.828686] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 2.828687] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 2.828688] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 2.828689] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 2.828691] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 2.828696] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16 [ 2.828853] flash size: 128 MiB [ 2.828854] page size: 512 bytes [ 2.828855] OOB area size: 16 bytes [ 2.828856] sector size: 16 KiB [ 2.828896] pages number: 262144 [ 2.828897] pages per sector: 32 [ 2.828898] bus width: 8 [ 2.828899] bits in sector size: 14 [ 2.828899] bits in page size: 9 [ 2.828900] bits in OOB size: 4 [ 2.828901] flash size with OOB: 135168 KiB [ 2.828902] page address bytes: 4 [ 2.828902] sector address bytes: 3 [ 2.828903] options: 0x42 [ 2.793025] [<782c37ed>] ? __alloc_pages_nodemask+0xe3/0x61e [ 2.793025] [<7860a3fa>] ? string.isra.4+0x29/0x93 [ 2.793025] [<7860a3fa>] ? string.isra.4+0x29/0x93 [ 2.793025] [<7860b19a>] ? vsnprintf+0x81/0x26f [ 2.793025] [<7860b627>] ? snprintf+0x15/0x17 [ 2.793025] [<785f62e9>] check_partition+0xe4/0x178 [ 2.793025] [<785f62e9>] ? check_partition+0xe4/0x178 [ 2.793025] [<785f5f3b>] rescan_partitions+0x89/0x267 [ 2.793025] [<78317fa8>] ? bdev_inode_switch_bdi+0xd2/0xe6 [ 2.793025] [<78318d5f>] __blkdev_get+0x173/0x363 [ 2.793025] [<78318f9a>] blkdev_get+0x4b/0x23d [ 2.793025] [<78318658>] ? bdget+0xf8/0x105 [ 2.793025] [<788acee0>] ? put_device+0xf/0x11 [ 2.793025] [<785f3f90>] add_disk+0x26b/0x3b5 [ 2.793025] [<788b4ffa>] ? __pm_runtime_use_autosuspend+0x4a/0x4f [ 2.793025] [<789d1acd>] sd_probe_async+0x111/0x198 [ 2.793025] [<78274964>] async_run_entry_fn+0x59/0xff [ 2.793025] [<7826bae8>] process_one_work+0x1ef/0x349 [ 2.793025] [<7826ba8f>] ? process_one_work+0x196/0x349 [ 2.793025] [<7826c039>] worker_thread+0x1a3/0x274 [ 2.793025] [<7826be96>] ? rescuer_thread+0x233/0x233 [ 2.793025] [<78270649>] kthread+0x8a/0x8f [ 2.793025] [<78270000>] ? SyS_timer_gettime+0x43/0x9e [ 2.793025] [<78fbabbb>] ret_from_kernel_thread+0x1b/0x30 [ 2.793025] [<782705bf>] ? __kthread_parkme+0x50/0x50 [ 2.870591] Scanning device for bad blocks [ 2.873054] sda: unknown partition table [ 2.877127] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.893720] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 2.894754] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 2.896925] parport0: cannot grant exclusive access for device spi-lm70llp [ 2.898033] spi-lm70llp: spi_lm70llp probe fail, status -12 [ 2.900171] libphy: Fixed MDIO Bus: probed [ 2.901613] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 2.902781] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013) [ 2.905293] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.50 [ 2.906239] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 2.907415] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 2.908560] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.909673] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.912307] e1000 0000:00:03.0: setting latency timer to 64 [ 3.116103] tsc: Refined TSC clocksource calibration: 2892.951 MHz [ 3.271235] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 3.272378] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.273475] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 3.274701] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.275651] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k [ 3.276821] ixgbe: Copyright (c) 1999-2013 Intel Corporation. [ 3.277789] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 0.3.9-k [ 3.279002] i40e: Copyright (c) 2013 Intel Corporation. [ 3.279862] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 3.280976] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 3.281869] sky2: driver version 1.30 [ 3.282558] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 3.283661] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01 [ 3.284901] Solarflare NET driver v4.0 [ 3.287163] usbcore: registered new interface driver stir4200 [ 3.288949] usbcore: registered new interface driver mcs7780 [ 3.290042] usbcore: registered new interface driver ksdazzle-sir [ 3.290979] usbcore: registered new interface driver ks959-sir [ 3.291900] PPP generic driver version 2.4.2 [ 3.292681] PPP Deflate Compression module registered [ 3.293490] PPP MPPE Compression module registered [ 3.294256] NET: Registered protocol family 24 [ 3.294929] PPTP driver version 0.8.5 [ 3.295624] usbcore: registered new interface driver i2400m_usb [ 3.296555] VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI [ 3.297645] usbcore: registered new interface driver catc [ 3.298512] usbcore: registered new interface driver r8152 [ 3.299442] usbcore: registered new interface driver ipheth [ 3.300385] Madge ATM Ambassador driver version 1.2.4 [ 3.301153] amb: debug bitmap is 0 [ 3.301721] Madge ATM Horizon [Ultra] driver version 1.2.1 [ 3.302614] hrz: debug bitmap is 0 [ 3.303236] fore200e: FORE Systems 200E-series ATM driver - version 0.3e [ 3.304340] idt77252_init: at 796e7dce [ 3.304969] Solos PCI Driver Version 1.04 [ 3.305648] adummy: version 1.0 [ 3.307257] parport0: cannot grant exclusive access for device ks0108 [ 3.308275] ks0108: ERROR: parport didn't register new device [ 3.310194] cfag12864b: ERROR: ks0108 is not initialized [ 3.310991] cfag12864bfb: ERROR: cfag12864b is not initialized [ 3.312320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.313322] ehci-pci: EHCI PCI platform driver [ 3.314150] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.315102] uhci_hcd: USB Universal Host Controller Interface driver [ 3.316220] driver u132_hcd [ 3.317936] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 3.318942] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.320308] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 3.321215] [ 3.322669] usbcore: registered new interface driver cdc_acm [ 3.323566] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.324835] usbcore: registered new interface driver usblp [ 3.325745] usbcore: registered new interface driver cdc_wdm [ 3.326669] usbcore: registered new interface driver usbtmc [ 3.327554] usbcore: registered new interface driver mdc800 [ 3.328417] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 3.330722] usbcore: registered new interface driver usbserial [ 3.331525] usbcore: registered new interface driver usbserial_generic [ 3.332436] usbserial: USB Serial support registered for generic [ 3.333414] usbcore: registered new interface driver aircable [ 3.334356] usbserial: USB Serial support registered for aircable [ 3.335334] usbcore: registered new interface driver ark3116 [ 3.336235] usbserial: USB Serial support registered for ark3116 [ 3.337181] usbcore: registered new interface driver belkin_sa [ 3.338127] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 3.339566] usbcore: registered new interface driver ch341 [ 3.340487] usbserial: USB Serial support registered for ch341-uart [ 3.341497] usbcore: registered new interface driver cp210x [ 3.342419] usbserial: USB Serial support registered for cp210x [ 3.343367] usbcore: registered new interface driver cyberjack [ 3.344311] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 3.345646] usbcore: registered new interface driver cypress_m8 [ 3.346616] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 3.347774] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 3.349966] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 3.351130] usbcore: registered new interface driver usb_debug [ 3.352074] usbserial: USB Serial support registered for debug [ 3.352993] usbcore: registered new interface driver f81232 [ 3.353909] usbserial: USB Serial support registered for f81232 [ 3.354866] usbcore: registered new interface driver ftdi_sio [ 3.355787] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.356967] usbcore: registered new interface driver garmin_gps [ 3.357902] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 3.359051] usbcore: registered new interface driver kl5kusb105 [ 3.359997] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect [ 3.361188] usbcore: registered new interface driver metro_usb [ 3.362131] usbserial: USB Serial support registered for Metrologic USB to Serial [ 3.363323] usbcore: registered new interface driver mos7720 [ 3.364223] usbserial: USB Serial support registered for Moschip 2 port adapter [ 3.365398] usbcore: registered new interface driver mos7840 [ 3.366317] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 3.367611] usbcore: registered new interface driver navman [ 3.368518] usbserial: USB Serial support registered for navman [ 3.369512] usbcore: registered new interface driver opticon [ 3.370436] usbserial: USB Serial support registered for opticon [ 3.371402] usbcore: registered new interface driver oti6858 [ 3.372326] usbserial: USB Serial support registered for oti6858 [ 3.373284] usbcore: registered new interface driver qcaux [ 3.374181] usbserial: USB Serial support registered for qcaux [ 3.375124] usbcore: registered new interface driver quatech2 [ 3.376079] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver [ 3.377418] usbcore: registered new interface driver usb_serial_simple [ 3.378457] usbserial: USB Serial support registered for zio [ 3.379410] usbserial: USB Serial support registered for funsoft [ 3.380365] usbserial: USB Serial support registered for flashloader [ 3.381381] usbserial: USB Serial support registered for vivopay [ 3.382376] usbserial: USB Serial support registered for moto_modem [ 3.383317] usbserial: USB Serial support registered for hp4x [ 3.384245] usbserial: USB Serial support registered for suunto [ 3.385218] usbserial: USB Serial support registered for siemens_mpi [ 3.386217] usbcore: registered new interface driver spcp8x5 [ 3.387115] usbserial: USB Serial support registered for SPCP8x5 [ 3.388123] usbcore: registered new interface driver ssu100 [ 3.388948] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 3.390282] usbcore: registered new interface driver symbolserial [ 3.391259] usbserial: USB Serial support registered for symbol [ 3.392214] usbcore: registered new interface driver ti_usb_3410_5052 [ 3.393252] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 3.394481] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 3.395714] usbcore: registered new interface driver visor [ 3.396612] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 3.397804] usbserial: USB Serial support registered for Sony Clie 5.0 [ 3.398883] usbserial: USB Serial support registered for Sony Clie 3.5 [ 3.399943] usbcore: registered new interface driver wishbone_serial [ 3.400972] usbserial: USB Serial support registered for wishbone_serial [ 3.402069] usbcore: registered new interface driver whiteheat [ 3.402982] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 3.404426] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 3.405623] usbcore: registered new interface driver xsens_mt [ 3.406554] usbserial: USB Serial support registered for xsens_mt [ 3.407526] usbcore: registered new interface driver zte_ev [ 3.408438] usbserial: USB Serial support registered for zte_ev [ 3.409429] usbcore: registered new interface driver adutux [ 3.410336] usbcore: registered new interface driver cypress_cy7c63 [ 3.411352] usbcore: registered new interface driver emi62 - firmware loader [ 3.412417] driver ftdi-elan [ 3.413265] usbcore: registered new interface driver ftdi-elan [ 3.414211] usbcore: registered new interface driver idmouse [ 3.415128] usbcore: registered new interface driver iowarrior [ 3.416068] usbcore: registered new interface driver isight_firmware [ 3.417075] usbcore: registered new interface driver usblcd [ 3.417939] usbcore: registered new interface driver ldusb [ 3.418871] usbcore: registered new interface driver usbled [ 3.419769] usbcore: registered new interface driver legousbtower [ 3.420759] usbcore: registered new interface driver rio500 [ 3.421674] usbcore: registered new interface driver uss720 [ 3.422552] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 3.424023] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 3.425160] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 3.426283] uss720: If you just want to connect to a printer, use usblp instead [ 3.427511] usbcore: registered new interface driver sisusb [ 3.430000] couldn't find an available UDC [ 3.430767] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.432980] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.433869] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.434761] parport0: cannot grant exclusive access for device parkbd [ 3.523632] mousedev: PS/2 mouse device common for all mice [ 3.524608] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 3.526210] usbcore: registered new interface driver bcm5974 [ 3.527234] usbcore: registered new interface driver synaptics_usb [ 3.528646] usbcore: registered new interface driver xpad [ 3.529653] parport0: cannot grant exclusive access for device walkera0701 [ 3.530794] walkera0701: failed to register parport device [ 3.531775] usbcore: registered new interface driver aiptek [ 3.532771] usbcore: registered new interface driver gtco [ 3.533755] usbcore: registered new interface driver hanwang [ 3.534741] usbcore: registered new interface driver wacom [ 3.535865] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 3.537269] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 3.538370] evbug: Connected device: input1 (PC Speaker at isa0061/input0) [ 3.540624] usbcore: registered new interface driver powermate [ 3.542126] i2c /dev entries driver [ 3.542294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.542303] evbug: Connected device: input2 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 3.545835] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 3.547530] i2c-parport: adapter type unspecified [ 3.548420] pps pps0: new PPS source ktimer [ 3.549052] pps pps0: ktimer PPS source registered [ 3.549682] pps_ldisc: PPS line discipline registered [ 3.550444] pps_parport: parallel port PPS client [ 3.551183] parport0: cannot grant exclusive access for device pps_parport [ 3.552219] pps_parport: couldn't register with parport0 [ 3.553173] Driver for 1-wire Dallas network protocol. [ 3.554119] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 3.555112] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 3.733081] applesmc: supported laptop not found! [ 3.733803] applesmc: driver init failed (ret=-19)! [ 4.117231] kwatchdog (114) used greatest stack depth: 7316 bytes left [ 5.590362] pc87360: PC8736x not detected, module not inserted [ 5.713149] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 5.714345] usbcore: registered new interface driver bcm203x [ 5.715263] usbcore: registered new interface driver bfusb [ 5.716236] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 5.717427] CAPI 2.0 started up with major 68 (no middleware) [ 5.718389] b1pci: revision 1.1.2.2 [ 5.718972] b1: revision 1.1.2.2 [ 5.719468] b1dma: revision 1.1.2.3 [ 5.720067] t1pci: revision 1.1.2.2 [ 5.720596] gigaset: Driver for Gigaset 307x [ 5.721259] gigaset: Kernel CAPI interface [ 5.721949] lguest: switcher text too large (4384) [ 5.722760] sdhci: Secure Digital Host Controller Interface driver [ 5.723706] sdhci: Copyright(c) Pierre Ossman [ 5.724570] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 5.727106] usbcore: registered new interface driver vub300 [ 5.727984] usbcore: registered new interface driver ushc [ 5.728830] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.730535] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.731799] hidraw: raw HID events driver (C) Jiri Kosina [ 5.733483] usbcore: registered new interface driver usbkbd [ 5.836504] panel: driver version 0.9.5 registered on parport0 (io=0x378). [ 5.837593] usbcore: registered new interface driver serqt_usb2 [ 5.838552] usbserial: USB Serial support registered for Quatech USB to Serial Driver [ 5.839775] vme_user: VME User Space Access Driver [ 5.840537] vme_user: No cards, skipping registration [ 5.841335] vme_pio2: No cards, skipping registration [ 5.843510] zram: Created 1 device(s) ... [ 5.844237] Loading crystalhd 0.9.27 [ 5.844919] usbcore: registered new interface driver ft1000usb [ 5.846093] ashmem: initialized [ 5.846687] logger: created 256K log 'log_main' [ 5.847563] logger: created 256K log 'log_events' [ 5.848411] logger: created 256K log 'log_radio' [ 5.850271] logger: created 256K log 'log_system' [ 5.851323] ozwpan ozwpan: Ozmo Devices WPAN [ 5.852129] ozwpan ozwpan: new USB bus registered, assigned bus number 1 [ 5.853525] hub 1-0:1.0: USB hub found [ 5.854196] hub 1-0:1.0: 8 ports detected [ 5.855465] usbcore: registered new interface driver gdm_wimax [ 5.856838] dgap: dgap-1.3-16, Digi International Part Number 40002347_C [ 5.857908] dgap: For the tools package or updated drivers please visit http://www.digi.com [ 5.860846] oprofile: using NMI interrupt. [ 5.861630] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 5.863216] NET: Registered protocol family 26 [ 5.864232] u32 classifier [ 5.864723] gre: GRE over IPv4 demultiplexor driver [ 5.865498] ip_gre: GRE over IPv4 tunneling driver [ 5.866779] IPv4 over IPSec tunneling driver [ 5.867721] TCP: bic registered [ 5.868222] TCP: cubic registered [ 5.868736] TCP: hybla registered [ 5.869273] TCP: vegas registered [ 5.869726] TCP: veno registered [ 5.870195] TCP: scalable registered [ 5.870724] TCP: lp registered [ 5.871220] TCP: illinois registered [ 5.872041] NET: Registered protocol family 10 [ 5.873777] mip6: Mobile IPv6 [ 5.874282] sit: IPv6 over IPv4 tunneling driver [ 5.875705] ip6_gre: GRE over IPv6 tunneling driver [ 5.876890] NET: Registered protocol family 15 [ 5.877717] NET: Registered protocol family 4 [ 5.878460] NET: Registered protocol family 5 [ 5.880236] NET: Registered protocol family 9 [ 5.880909] X.25 for Linux Version 0.2 [ 5.881544] can: controller area network core (rev 20120528 abi 9) [ 5.882602] NET: Registered protocol family 29 [ 5.883309] can: broadcast manager protocol (rev 20120528 t) [ 5.884200] can: netlink gateway (rev 20130117) max_hops=1 [ 5.885879] Bluetooth: RFCOMM TTY layer initialized [ 5.886683] Bluetooth: RFCOMM socket layer initialized [ 5.887466] Bluetooth: RFCOMM ver 1.11 [ 5.888196] NET: Registered protocol family 33 [ 5.888889] Key type rxrpc registered [ 5.889469] Key type rxrpc_s registered [ 5.890412] cryptomgr_probe (122) used greatest stack depth: 7112 bytes left [ 5.891575] RxRPC: Registered security type 2 'rxkad' [ 5.892392] lec:lane_module_init: lec.c: initialized [ 5.893186] mpoa:atm_mpoa_init: mpc.c: initialized [ 5.893957] l2tp_core: L2TP core driver, V2.0 [ 5.894662] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 5.895419] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 5.896854] DECnet: Routing cache hash table of 256 buckets, 11Kbytes [ 5.897906] NET: Registered protocol family 12 [ 5.898628] 8021q: 802.1Q VLAN Support v1.8 [ 5.899861] DCCP: Activated CCID 2 (TCP-like) [ 5.900622] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 5.901985] sctp: Hash tables configured (established 1365 bind 1489) [ 5.903874] NET: Registered protocol family 21 [ 5.904604] Registered RDS/tcp transport [ 5.905275] tipc: Activated (version 2.0.0) [ 5.906148] NET: Registered protocol family 30 [ 5.907090] tipc: Started in single node mode [ 5.907750] 9pnet: Installing 9P2000 support [ 5.908491] NET: Registered protocol family 37 [ 5.909293] Key type dns_resolver registered [ 5.909978] Key type ceph registered [ 5.910706] libceph: loaded (mon/osd proto 15/24) [ 5.912948] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version 14) loaded [ 5.914368] NET: Registered protocol family 40 [ 5.915108] mpls_gso: MPLS GSO support [ 5.917260] [ 5.917260] printing PIC contents [ 5.918044] ... PIC IMR: ffff [ 5.918524] ... PIC IRR: 1013 [ 5.919068] ... PIC ISR: 0000 [ 5.919549] ... PIC ELCR: 0c00 [ 5.920049] printing local APIC contents on CPU#0/0: [ 5.920821] ... APIC ID: 00000000 (0) [ 5.921026] ... APIC VERSION: 00050014 [ 5.921026] ... APIC TASKPRI: 00000000 (00) [ 5.921026] ... APIC PROCPRI: 00000000 [ 5.921026] ... APIC LDR: 01000000 [ 5.921026] ... APIC DFR: ffffffff [ 5.921026] ... APIC SPIV: 000001ff [ 5.921026] ... APIC ISR field: [ 5.921026] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.921026] ... APIC TMR field: [ 5.921026] 0000000002000000000000000000000000000000000000000000000000000000 [ 5.921026] ... APIC IRR field: [ 5.921026] 0000000000000000000000000000000000000000000000000000000000008000 [ 5.921026] ... APIC ESR: 00000000 [ 5.921026] ... APIC ICR: 000008fd [ 5.921026] ... APIC ICR2: 02000000 [ 5.921026] ... APIC LVTT: 000000ef [ 5.921026] ... APIC LVTPC: 00010000 [ 5.921026] ... APIC LVT0: 00010700 [ 5.921026] ... APIC LVT1: 00000400 [ 5.921026] ... APIC LVTERR: 000000fe [ 5.921026] ... APIC TMICT: 0000ecdd [ 5.921026] ... APIC TMCCT: 00000000 [ 5.921026] ... APIC TDCR: 00000003 [ 5.921026] [ 5.936473] number of MP IRQ sources: 15. [ 5.937101] number of IO-APIC #0 registers: 24. [ 5.937770] testing the IO APIC....................... [ 5.938595] IO APIC #0...... [ 5.940108] .... register #00: 00000000 [ 5.940704] ....... : physical APIC id: 00 [ 5.941394] ....... : Delivery Type: 0 [ 5.941956] ....... : LTS : 0 [ 5.942553] .... register #01: 00170011 [ 5.943164] ....... : max redirection entries: 17 [ 5.943914] ....... : PRQ implemented: 0 [ 5.944582] ....... : IO APIC version: 11 [ 5.945275] .... register #02: 00000000 [ 5.945864] ....... : arbitration: 00 [ 5.946494] .... IRQ redirection table: [ 5.947113] 1 0 0 0 0 0 0 00 [ 5.947815] 0 0 0 0 0 1 1 31 [ 5.948543] 0 0 0 0 0 1 1 30 [ 5.950299] 0 0 0 0 0 1 1 33 [ 5.951032] 1 0 0 0 0 1 1 34 [ 5.951734] 1 1 0 0 0 1 1 35 [ 5.952471] 0 0 0 0 0 1 1 36 [ 5.953190] 0 0 0 0 0 1 1 37 [ 5.953894] 0 0 0 0 0 1 1 38 [ 5.954613] 0 1 0 0 0 1 1 39 [ 5.955356] 1 1 0 0 0 1 1 3A [ 5.956124] 1 1 0 0 0 1 1 3B [ 5.956837] 0 0 0 0 0 1 1 3C [ 5.957556] 0 0 0 0 0 1 1 3D [ 5.958295] 0 0 0 0 0 1 1 3E [ 5.960058] 0 0 0 0 0 1 1 3F [ 5.960756] 1 0 0 0 0 0 0 00 [ 5.961494] 1 0 0 0 0 0 0 00 [ 5.962232] 1 0 0 0 0 0 0 00 [ 5.962939] 1 0 0 0 0 0 0 00 [ 5.963663] 1 0 0 0 0 0 0 00 [ 5.964390] 1 0 0 0 0 0 0 00 [ 5.965119] 1 0 0 0 0 0 0 00 [ 5.965841] 1 0 0 0 0 0 0 00 [ 5.966551] IRQ to pin mappings: [ 5.967075] IRQ0 -> 0:2 [ 5.967483] IRQ1 -> 0:1 [ 5.967925] IRQ3 -> 0:3 [ 5.968381] IRQ4 -> 0:4 [ 5.968828] IRQ5 -> 0:5 [ 5.969269] IRQ6 -> 0:6 [ 5.969685] IRQ7 -> 0:7 [ 5.970145] IRQ8 -> 0:8 [ 5.970577] IRQ9 -> 0:9 [ 5.970938] IRQ10 -> 0:10 [ 5.971377] IRQ11 -> 0:11 [ 5.971832] IRQ12 -> 0:12 [ 5.972320] IRQ13 -> 0:13 [ 5.972773] IRQ14 -> 0:14 [ 5.973252] IRQ15 -> 0:15 [ 5.973699] .................................... done. [ 5.974501] Using IPI No-Shortcut mode [ 5.976947] registered taskstats version 1 [ 5.977619] kAFS: Red Hat AFS client v0.1 registering. [ 5.978499] FS-Cache: Netfs 'afs' registered for caching [ 5.980247] cryptomgr_probe (129) used greatest stack depth: 7056 bytes left [ 5.980263] Key type encrypted registered [ 5.980408] IMA: No TPM chip found, activating TPM-bypass! [ 5.983346] Unregister pv shared memory for cpu 0 [ 5.990828] CPU 0 is now offline [ 5.992824] Freeing unused kernel memory: 1944K (796ae000 - 79894000) mountall: ply-event-loop.c:497: ply_event_loop_new: Assertion `loop->epoll_fd >= 0' failed. [ 6.037445] mountall (142) used greatest stack depth: 6928 bytes left General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and reboot the system. wfg: rebooting [ 6.064991] Unregister pv shared memory for cpu 1 [ 6.065895] no ifx modem active; [ 6.090600] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6.103543] reboot: Restarting system [ 6.104194] reboot: machine restart Elapsed time: 10 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-j7-11082318/d3516a7318f8e22f5462888fdf9edc8f0f128024/vmlinuz-3.12.0-00186-gd3516a7 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-j7-11082318/wfg:fix-blkg_stat_init/.vmlinuz-d3516a7318f8e22f5462888fdf9edc8f0f128024-20131112153423-22-athens branch=wfg/fix-blkg_stat_init BOOT_IMAGE=/kernel/i386-randconfig-j7-11082318/d3516a7318f8e22f5462888fdf9edc8f0f128024/vmlinuz-3.12.0-00186-gd3516a7' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 256M -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -drive file=/fs/LABEL=KVM/disk0-quantal-athens-20,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk1-quantal-athens-20,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk2-quantal-athens-20,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk3-quantal-athens-20,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk4-quantal-athens-20,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk5-quantal-athens-20,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-quantal-athens-20 -serial file:/dev/shm/kboot/serial-quantal-athens-20 -daemonize -display none -monitor null