| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACRpkdYdoXuSvmMP+ynyZtPZr3fqAedhZLQTB5jW4FUvDCm7mw@mail.gmail.com>
Date: Tue, 12 Nov 2013 20:32:20 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Viktar Palstsiuk <viktar.palstsiuk@...mwad.com>,
Gregory Bean <gbean@...eaurora.org>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
David Brown <davidb@...eaurora.org>
Subject: Re: [PATCH] gpio: Add support for SX151x SPI GPIO Expanders
Gregory,
this is your driver, can you take a look at this patch?
Yours,
Linus Walleij
On Thu, Oct 24, 2013 at 11:51 AM, Viktar Palstsiuk
<viktar.palstsiuk@...mwad.com> wrote:
> Isolated i2c specific parts and
> added spi bindings for the sx151x devices.
>
> Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@...mwad.com>
> ---
> drivers/gpio/Kconfig | 10 +-
> drivers/gpio/gpio-sx150x.c | 267 +++++++++++++++++++++++++++++++++++++++------
> 2 files changed, 239 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index b6ed304..4d296ab 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -465,15 +465,15 @@ config GPIO_RC5T583
> of RC5T583 device through standard gpio library.
>
> config GPIO_SX150X
> - bool "Semtech SX150x I2C GPIO expander"
> - depends on I2C=y
> + bool "Semtech SX15xx I2C/SPI GPIO expander"
> + depends on SPI_MASTER || I2C
> default n
> help
> - Say yes here to provide support for Semtech SX150-series I2C
> + Say yes here to provide support for Semtech SX15xx-series I2C/SPI
> GPIO expanders. Compatible models include:
>
> - 8 bits: sx1508q
> - 16 bits: sx1509q
> + 8 bits: sx1508q, sx1511
> + 16 bits: sx1509q, sx1512
>
> config GPIO_STMPE
> bool "STMPE GPIOs"
> diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
> index d2983e9..bee1661 100644
> --- a/drivers/gpio/gpio-sx150x.c
> +++ b/drivers/gpio/gpio-sx150x.c
> @@ -22,9 +22,16 @@
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/slab.h>
> +#include <linux/spi/spi.h>
> #include <linux/workqueue.h>
> #include <linux/i2c/sx150x.h>
>
> +/**
> + * SX15xx types supported by driver
> + */
> +#define SX15_TYPE_8_GPIOS 0
> +#define SX15_TYPE_16_GPIOS 1
> +
> #define NO_UPDATE_PENDING -1
>
> struct sx150x_device_data {
> @@ -43,9 +50,17 @@ struct sx150x_device_data {
> u8 ngpios;
> };
>
> +struct sx150x_chip;
> +
> +struct sx15xx_ops {
> + s32 (*read)(struct device *dev, u8 reg, u8 *val);
> + s32 (*write)(struct device *dev, u8 reg, u8 val);
> +};
> +
> struct sx150x_chip {
> struct gpio_chip gpio_chip;
> - struct i2c_client *client;
> + struct device *dev;
> + const struct sx15xx_ops *ops;
> const struct sx150x_device_data *dev_cfg;
> int irq_summary;
> int irq_base;
> @@ -59,7 +74,7 @@ struct sx150x_chip {
> };
>
> static const struct sx150x_device_data sx150x_devices[] = {
> - [0] = { /* sx1508q */
> + [SX15_TYPE_8_GPIOS] = { /* sx1508q */
> .reg_pullup = 0x03,
> .reg_pulldn = 0x04,
> .reg_drain = 0x05,
> @@ -74,7 +89,7 @@ static const struct sx150x_device_data sx150x_devices[] = {
> .reg_reset = 0x7d,
> .ngpios = 8
> },
> - [1] = { /* sx1509q */
> + [SX15_TYPE_16_GPIOS] = { /* sx1509q */
> .reg_pullup = 0x07,
> .reg_pulldn = 0x09,
> .reg_drain = 0x0b,
> @@ -91,37 +106,86 @@ static const struct sx150x_device_data sx150x_devices[] = {
> },
> };
>
> -static const struct i2c_device_id sx150x_id[] = {
> - {"sx1508q", 0},
> - {"sx1509q", 1},
> - {}
> -};
> -MODULE_DEVICE_TABLE(i2c, sx150x_id);
> +#ifdef CONFIG_I2C
>
> -static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
> +static s32 sx150x_i2c_write(struct device *dev, u8 reg, u8 val)
> {
> + struct i2c_client *client = to_i2c_client(dev);
> s32 err = i2c_smbus_write_byte_data(client, reg, val);
>
> if (err < 0)
> - dev_warn(&client->dev,
> + dev_warn(dev,
> "i2c write fail: can't write %02x to %02x: %d\n",
> val, reg, err);
> return err;
> }
>
> -static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
> +static s32 sx150x_i2c_read(struct device *dev, u8 reg, u8 *val)
> {
> + struct i2c_client *client = to_i2c_client(dev);
> s32 err = i2c_smbus_read_byte_data(client, reg);
>
> if (err >= 0)
> *val = err;
> else
> - dev_warn(&client->dev,
> + dev_warn(dev,
> "i2c read fail: can't read from %02x: %d\n",
> reg, err);
> return err;
> }
>
> +static const struct sx15xx_ops sx150x_ops = {
> + .read = sx150x_i2c_read,
> + .write = sx150x_i2c_write,
> +};
> +
> +#endif /* CONFIG_I2C */
> +
> +#ifdef CONFIG_SPI_MASTER
> +
> +static s32 sx151x_spi_write(struct device *dev, u8 reg, u8 val)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + u8 tx[2];
> + s32 err;
> +
> + tx[0] = reg;
> + tx[1] = val;
> +
> + err = spi_write(spi, tx, sizeof tx);
> +
> + if (err < 0)
> + dev_warn(dev,
> + "spi write fail: can't write %02x to %02x: %d\n",
> + val, reg, err);
> + return err;
> +}
> +
> +static s32 sx151x_spi_read(struct device *dev, u8 reg, u8 *val)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + u8 tx[1], rx[1];
> + s32 err;
> +
> + tx[0] = reg | 0x80;
> + err = spi_write_then_read(spi, tx, sizeof tx, rx, sizeof rx);
> +
> + if (err >= 0)
> + *val = rx[0];
> + else
> + dev_warn(dev,
> + "spi read fail: can't read from %02x: %d\n",
> + reg, err);
> + return err;
> +}
> +
> +static const struct sx15xx_ops sx151x_ops = {
> + .read = sx151x_spi_read,
> + .write = sx151x_spi_write,
> +};
> +
> +#endif /* CONFIG_SPI_MASTER */
> +
> static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
> {
> return (chip->dev_cfg->ngpios == offset);
> @@ -164,13 +228,12 @@ static s32 sx150x_write_cfg(struct sx150x_chip *chip,
> s32 err;
>
> sx150x_find_cfg(offset, width, ®, &mask, &shift);
> - err = sx150x_i2c_read(chip->client, reg, &data);
> + err = chip->ops->read(chip->dev, reg, &data);
> if (err < 0)
> return err;
> -
> data &= ~mask;
> data |= (val << shift) & mask;
> - return sx150x_i2c_write(chip->client, reg, data);
> + return chip->ops->write(chip->dev, reg, data);
> }
>
> static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
> @@ -182,7 +245,7 @@ static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
> s32 err;
>
> sx150x_find_cfg(offset, 1, ®, &mask, &shift);
> - err = sx150x_i2c_read(chip->client, reg, &data);
> + err = chip->ops->read(chip->dev, reg, &data);
> if (err >= 0)
> err = (data & mask) != 0 ? 1 : 0;
>
> @@ -191,7 +254,7 @@ static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
>
> static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
> {
> - sx150x_i2c_write(chip->client,
> + chip->ops->write(chip->dev,
> chip->dev_cfg->reg_clock,
> (val ? 0x1f : 0x10));
> }
> @@ -361,13 +424,13 @@ static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
> int i;
>
> for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
> - err = sx150x_i2c_read(chip->client,
> + err = chip->ops->read(chip->dev,
> chip->dev_cfg->reg_irq_src - i,
> &val);
> if (err < 0)
> continue;
>
> - sx150x_i2c_write(chip->client,
> + chip->ops->write(chip->dev,
> chip->dev_cfg->reg_irq_src - i,
> val);
> for (n = 0; n < 8; ++n) {
> @@ -421,15 +484,17 @@ out:
> }
>
> static void sx150x_init_chip(struct sx150x_chip *chip,
> - struct i2c_client *client,
> + struct device *dev,
> + const struct sx15xx_ops *ops,
> kernel_ulong_t driver_data,
> struct sx150x_platform_data *pdata)
> {
> mutex_init(&chip->lock);
>
> - chip->client = client;
> + chip->dev = dev;
> + chip->ops = ops;
> chip->dev_cfg = &sx150x_devices[driver_data];
> - chip->gpio_chip.label = client->name;
> + chip->gpio_chip.label = dev_name(dev);
> chip->gpio_chip.direction_input = sx150x_gpio_direction_input;
> chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
> chip->gpio_chip.get = sx150x_gpio_get;
> @@ -441,7 +506,7 @@ static void sx150x_init_chip(struct sx150x_chip *chip,
> if (pdata->oscio_is_gpo)
> ++chip->gpio_chip.ngpio;
>
> - chip->irq_chip.name = client->name;
> + chip->irq_chip.name = dev_name(dev);
> chip->irq_chip.irq_mask = sx150x_irq_mask;
> chip->irq_chip.irq_unmask = sx150x_irq_unmask;
> chip->irq_chip.irq_set_type = sx150x_irq_set_type;
> @@ -462,7 +527,7 @@ static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
> unsigned n;
>
> for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
> - err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
> + err = chip->ops->write(chip->dev, base - n, cfg >> (n * 8));
> return err;
> }
>
> @@ -470,13 +535,13 @@ static int sx150x_reset(struct sx150x_chip *chip)
> {
> int err;
>
> - err = i2c_smbus_write_byte_data(chip->client,
> + err = chip->ops->write(chip->dev,
> chip->dev_cfg->reg_reset,
> 0x12);
> if (err < 0)
> return err;
>
> - err = i2c_smbus_write_byte_data(chip->client,
> + err = chip->ops->write(chip->dev,
> chip->dev_cfg->reg_reset,
> 0x34);
> return err;
> @@ -493,7 +558,7 @@ static int sx150x_init_hw(struct sx150x_chip *chip,
> return err;
> }
>
> - err = sx150x_i2c_write(chip->client,
> + err = chip->ops->write(chip->dev,
> chip->dev_cfg->reg_misc,
> 0x01);
> if (err < 0)
> @@ -548,7 +613,7 @@ static int sx150x_install_irq_chip(struct sx150x_chip *chip,
> #endif
> }
>
> - err = devm_request_threaded_irq(&chip->client->dev,
> + err = devm_request_threaded_irq(chip->dev,
> irq_summary,
> NULL,
> sx150x_irq_thread_fn,
> @@ -574,6 +639,8 @@ static void sx150x_remove_irq_chip(struct sx150x_chip *chip)
> }
> }
>
> +#ifdef CONFIG_I2C
> +
> static int sx150x_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -595,7 +662,7 @@ static int sx150x_probe(struct i2c_client *client,
> if (!chip)
> return -ENOMEM;
>
> - sx150x_init_chip(chip, client, id->driver_data, pdata);
> + sx150x_init_chip(chip, &client->dev, &sx150x_ops, id->driver_data, pdata);
> rc = sx150x_init_hw(chip, pdata);
> if (rc < 0)
> return rc;
> @@ -636,6 +703,13 @@ static int sx150x_remove(struct i2c_client *client)
> return 0;
> }
>
> +static const struct i2c_device_id sx150x_id[] = {
> + {"sx1508q", SX15_TYPE_8_GPIOS},
> + {"sx1509q", SX15_TYPE_16_GPIOS},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, sx150x_id);
> +
> static struct i2c_driver sx150x_driver = {
> .driver = {
> .name = "sx150x",
> @@ -646,19 +720,146 @@ static struct i2c_driver sx150x_driver = {
> .id_table = sx150x_id,
> };
>
> -static int __init sx150x_init(void)
> +static int __init sx150x_i2c_init(void)
> {
> return i2c_add_driver(&sx150x_driver);
> }
> +
> +static void __exit sx150x_i2c_exit(void)
> +{
> + return i2c_del_driver(&sx150x_driver);
> +}
> +
> +#else
> +
> +static int __init sx150x_i2c_init(void) { return 0; }
> +static void sx150x_i2c_exit(void) { }
> +
> +#endif /* CONFIG_I2C */
> +
> +#ifdef CONFIG_SPI_MASTER
> +
> +static int sx151x_probe(struct spi_device *spi)
> +{
> + struct sx150x_platform_data *pdata;
> + struct sx150x_chip *chip;
> + int rc;
> +
> + pdata = dev_get_platdata(&spi->dev);
> + if (!pdata) {
> + return -EINVAL;
> + }
> +
> + chip = devm_kzalloc(&spi->dev,
> + sizeof(struct sx150x_chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + sx150x_init_chip(chip, &spi->dev, &sx151x_ops,
> + spi_get_device_id(spi)->driver_data, pdata);
> + rc = sx150x_init_hw(chip, pdata);
> + if (rc < 0)
> + return rc;
> +
> + rc = gpiochip_add(&chip->gpio_chip);
> + if (rc < 0)
> + return rc;
> +
> + if (pdata->irq_summary >= 0) {
> + rc = sx150x_install_irq_chip(chip,
> + pdata->irq_summary,
> + pdata->irq_base);
> + if (rc < 0)
> + goto probe_fail_post_gpiochip_add;
> + }
> +
> + spi_set_drvdata(spi, chip);
> +
> + return 0;
> +probe_fail_post_gpiochip_add:
> + WARN_ON(gpiochip_remove(&chip->gpio_chip) < 0);
> + return rc;
> +}
> +
> +static int sx151x_remove(struct spi_device *spi)
> +{
> + struct sx150x_chip *chip;
> + int rc;
> +
> + chip = spi_get_drvdata(spi);
> + rc = gpiochip_remove(&chip->gpio_chip);
> + if (rc < 0)
> + return rc;
> +
> + if (chip->irq_summary >= 0)
> + sx150x_remove_irq_chip(chip);
> +
> + return 0;
> +}
> +
> +static const struct spi_device_id sx151x_ids[] = {
> + { "sx1511", SX15_TYPE_8_GPIOS },
> + { "sx1512", SX15_TYPE_16_GPIOS },
> + { },
> +};
> +MODULE_DEVICE_TABLE(spi, sx151x_ids);
> +
> +static struct spi_driver sx151x_driver = {
> + .probe = sx151x_probe,
> + .remove = sx151x_remove,
> + .id_table = sx151x_ids,
> + .driver = {
> + .name = "sx151x",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init sx151x_spi_init(void)
> +{
> + return spi_register_driver(&sx151x_driver);
> +}
> +
> +static void sx151x_spi_exit(void)
> +{
> + spi_unregister_driver(&sx151x_driver);
> +}
> +
> +#else
> +
> +static int __init sx151x_spi_init(void) { return 0; }
> +static void sx151x_spi_exit(void) { }
> +
> +#endif /* CONFIG_SPI_MASTER */
> +
> +static int __init sx150x_init(void)
> +{
> + int ret;
> +
> + ret = sx151x_spi_init();
> + if (ret)
> + goto spi_fail;
> +
> + ret = sx150x_i2c_init();
> + if (ret)
> + goto i2c_fail;
> +
> + return 0;
> +
> + i2c_fail:
> + sx151x_spi_exit();
> + spi_fail:
> + return ret;
> +}
> subsys_initcall(sx150x_init);
>
> static void __exit sx150x_exit(void)
> {
> - return i2c_del_driver(&sx150x_driver);
> + sx151x_spi_exit();
> + sx150x_i2c_exit();
> }
> module_exit(sx150x_exit);
>
> MODULE_AUTHOR("Gregory Bean <gbean@...eaurora.org>");
> -MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
> +MODULE_DESCRIPTION("Driver for Semtech SX15xx I2C/SPI GPIO Expanders");
> MODULE_LICENSE("GPL v2");
> MODULE_ALIAS("i2c:sx150x");
> --
> 1.8.4.rc3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists