| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1384293629-4645-1-git-send-email-b.brezillon@overkiz.com>
Date: Tue, 12 Nov 2013 23:00:29 +0100
From: Boris BREZILLON <b.brezillon@...rkiz.com>
To: Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Landley <rob@...dley.net>,
Andrew Victor <linux@...im.org.za>,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Russell King <linux@....linux.org.uk>,
Mike Turquette <mturquette@...aro.org>,
Felipe Balbi <balbi@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Grant Likely <grant.likely@...aro.org>,
Ludovic Desroches <ludovic.desroches@...el.com>,
Josh Wu <josh.wu@...el.com>,
Richard Genoud <richard.genoud@...il.com>
Cc: Boris BREZILLON <b.brezillon@...rkiz.com>,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-usb@...r.kernel.org
Subject: [PATCH v5 07/17] clk: at91: add PMC master clock
This patch adds new at91 master clock implementation using common clk
framework.
The master clock layout describe the MCKR register layout.
There are 2 master clock layouts:
- at91rm9200
- at91sam9x5
Master clocks are given characteristics:
- min/max clock output rate
These characteristics are checked during rate change to avoid
over/underclocking.
These characteristics are described in atmel's SoC datasheet in
"Electrical Characteristics" paragraph.
Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
drivers/clk/at91/Makefile | 2 +-
drivers/clk/at91/clk-master.c | 272 +++++++++++++++++++++++++++++++++++++++++
drivers/clk/at91/clk-pll.c | 10 +-
drivers/clk/at91/pmc.c | 9 ++
drivers/clk/at91/pmc.h | 5 +
5 files changed, 289 insertions(+), 9 deletions(-)
create mode 100644 drivers/clk/at91/clk-master.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 902bbf1..e28fb2b 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -3,4 +3,4 @@
#
obj-y += pmc.o
-obj-y += clk-main.o clk-pll.o clk-plldiv.o
+obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
new file mode 100644
index 0000000..65b81de
--- /dev/null
+++ b/drivers/clk/at91/clk-master.c
@@ -0,0 +1,272 @@
+/*
+ * drivers/clk/at91/clk-master.c
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@...rkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include "pmc.h"
+
+#define MASTER_SOURCE_MAX 4
+
+#define MASTER_PRES_MASK 0x7
+#define MASTER_PRES_MAX MASTER_PRES_MASK
+#define MASTER_DIV_SHIFT 8
+#define MASTER_DIV_MASK 0x3
+
+struct clk_master_characteristics {
+ struct clk_range output;
+ u32 divisors[4];
+ u8 have_div3_pres;
+};
+
+struct clk_master_layout {
+ u32 mask;
+ u8 pres_shift;
+};
+
+#define to_clk_master(hw) container_of(hw, struct clk_master, hw)
+
+struct clk_master {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ const struct clk_master_layout *layout;
+ const struct clk_master_characteristics *characteristics;
+};
+
+static irqreturn_t clk_master_irq_handler(int irq, void *dev_id)
+{
+ struct clk_master *master = (struct clk_master *)dev_id;
+
+ wake_up(&master->wait);
+ disable_irq_nosync(master->irq);
+
+ return IRQ_HANDLED;
+}
+static int clk_master_prepare(struct clk_hw *hw)
+{
+ struct clk_master *master = to_clk_master(hw);
+ struct at91_pmc *pmc = master->pmc;
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MCKRDY)) {
+ enable_irq(master->irq);
+ wait_event(master->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MCKRDY);
+ }
+
+ return 0;
+}
+
+static int clk_master_is_prepared(struct clk_hw *hw)
+{
+ struct clk_master *master = to_clk_master(hw);
+
+ return !!(pmc_read(master->pmc, AT91_PMC_SR) & AT91_PMC_MCKRDY);
+}
+
+static unsigned long clk_master_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u8 pres;
+ u8 div;
+ unsigned long rate = parent_rate;
+ struct clk_master *master = to_clk_master(hw);
+ struct at91_pmc *pmc = master->pmc;
+ const struct clk_master_layout *layout = master->layout;
+ const struct clk_master_characteristics *characteristics =
+ master->characteristics;
+ u32 tmp;
+
+ pmc_lock(pmc);
+ tmp = pmc_read(pmc, AT91_PMC_MCKR) & layout->mask;
+ pmc_unlock(pmc);
+
+ pres = (tmp >> layout->pres_shift) & MASTER_PRES_MASK;
+ div = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
+
+ if (characteristics->have_div3_pres && pres == MASTER_PRES_MAX)
+ rate /= 3;
+ else
+ rate >>= pres;
+
+ rate /= characteristics->divisors[div];
+
+ if (rate < characteristics->output.min)
+ pr_warn("master clk is underclocked");
+ else if (rate > characteristics->output.max)
+ pr_warn("master clk is overclocked");
+
+ return rate;
+}
+
+static u8 clk_master_get_parent(struct clk_hw *hw)
+{
+ struct clk_master *master = to_clk_master(hw);
+ struct at91_pmc *pmc = master->pmc;
+
+ return pmc_read(pmc, AT91_PMC_MCKR) & AT91_PMC_CSS;
+}
+
+static const struct clk_ops master_ops = {
+ .prepare = clk_master_prepare,
+ .is_prepared = clk_master_is_prepared,
+ .recalc_rate = clk_master_recalc_rate,
+ .get_parent = clk_master_get_parent,
+};
+
+static struct clk * __init
+at91_clk_register_master(struct at91_pmc *pmc, unsigned int irq,
+ const char *name, int num_parents,
+ const char **parent_names,
+ const struct clk_master_layout *layout,
+ const struct clk_master_characteristics *characteristics)
+{
+ int ret;
+ struct clk_master *master;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !irq || !name || !num_parents || !parent_names)
+ return ERR_PTR(-EINVAL);
+
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
+ if (!master)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &master_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = 0;
+
+ master->hw.init = &init;
+ master->layout = layout;
+ master->characteristics = characteristics;
+ master->pmc = pmc;
+ master->irq = irq;
+ init_waitqueue_head(&master->wait);
+ irq_set_status_flags(master->irq, IRQ_NOAUTOEN);
+ ret = request_irq(master->irq, clk_master_irq_handler,
+ IRQF_TRIGGER_HIGH, "clk-master", master);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &master->hw);
+ if (IS_ERR(clk))
+ kfree(master);
+
+ return clk;
+}
+
+
+static const struct clk_master_layout at91rm9200_master_layout = {
+ .mask = 0x31F,
+ .pres_shift = 2,
+};
+
+static const struct clk_master_layout at91sam9x5_master_layout = {
+ .mask = 0x373,
+ .pres_shift = 4,
+};
+
+
+static struct clk_master_characteristics * __init
+of_at91_clk_master_get_characteristics(struct device_node *np)
+{
+ struct clk_master_characteristics *characteristics;
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output))
+ goto out_free_characteristics;
+
+ of_property_read_u32_array(np, "atmel,clk-divisors",
+ characteristics->divisors, 4);
+
+ characteristics->have_div3_pres =
+ of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
+
+ return characteristics;
+
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_master_setup(struct device_node *np, struct at91_pmc *pmc,
+ const struct clk_master_layout *layout)
+{
+ struct clk *clk;
+ int num_parents;
+ int i;
+ unsigned int irq;
+ const char *parent_names[MASTER_SOURCE_MAX];
+ const char *name = np->name;
+ struct clk_master_characteristics *characteristics;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > MASTER_SOURCE_MAX)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ characteristics = of_at91_clk_master_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_master(pmc, irq, name, num_parents,
+ parent_names, layout,
+ characteristics);
+ if (IS_ERR(clk))
+ goto out_free_characteristics;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+void __init of_at91rm9200_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_master_setup(np, pmc, &at91rm9200_master_layout);
+}
+
+void __init of_at91sam9x5_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_master_setup(np, pmc, &at91sam9x5_master_layout);
+}
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 57cedb5..c4d0dc8 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -82,6 +82,8 @@ static int clk_pll_prepare(struct clk_hw *hw)
struct clk_pll *pll = to_clk_pll(hw);
struct at91_pmc *pmc = pll->pmc;
const struct clk_pll_layout *layout = pll->layout;
+ const struct clk_pll_characteristics *characteristics =
+ pll->characteristics;
u8 id = pll->id;
u32 mask = PLL_STATUS_MASK(id);
int offset = PLL_REG(id);
@@ -271,18 +273,10 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
- struct at91_pmc *pmc = pll->pmc;
- const struct clk_pll_layout *layout = pll->layout;
- const struct clk_pll_characteristics *characteristics =
- pll->characteristics;
- u8 id = pll->id;
- int offset = PLL_REG(id);
long ret;
u32 div;
u32 mul;
u32 index;
- u32 tmp;
- u8 out = 0;
ret = clk_pll_get_best_div_mul(pll, rate, parent_rate,
&div, &mul, &index);
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index d26fdb7..d9975e7 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -257,6 +257,15 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
.compatible = "atmel,at91sam9x5-clk-plldiv",
.data = of_at91sam9x5_clk_plldiv_setup,
},
+ /* Master clock */
+ {
+ .compatible = "atmel,at91rm9200-clk-master",
+ .data = of_at91rm9200_clk_master_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-master",
+ .data = of_at91sam9x5_clk_master_setup,
+ },
{ /*sentinel*/ }
};
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 15aaf38..be5c964 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -72,4 +72,9 @@ extern void __init of_sama5d3_clk_pll_setup(struct device_node *np,
extern void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
struct at91_pmc *pmc);
+extern void __init of_at91rm9200_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
#endif /* __PMC_H_ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists