[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1384462936-7906-2-git-send-email-tim.kryger@linaro.org>
Date: Thu, 14 Nov 2013 13:02:12 -0800
From: "Tim Kryger" <tim.kryger@...aro.org>
To: "Christian Daudt" <bcm@...thebug.org>,
"Rob Herring" <rob.herring@...xeda.com>,
"Pawel Moll" <pawel.moll@....com>,
"Mark Rutland" <mark.rutland@....com>,
"Stephen Warren" <swarren@...dotorg.org>,
"Ian Campbell" <ijc+devicetree@...lion.org.uk>,
"Rob Landley" <rob@...dley.net>,
"Wolfram Sang" <wsa@...-dreams.de>,
"Grant Likely" <grant.likely@...aro.org>
cc: "Tim Kryger" <tim.kryger@...aro.org>,
"Device Tree List" <devicetree@...r.kernel.org>,
"Linux Doc List" <linux-doc@...r.kernel.org>,
"Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
"Linux I2C List" <linux-i2c@...r.kernel.org>,
"Linux ARM Kernel List" <linux-arm-kernel@...ts.infradead.org>,
"Linaro Patches List" <patches@...aro.org>
Subject: [PATCH v2 1/5] Documentation: dt: Add i2c-bcm-kona binding
Add the binding description for the i2c-bcm-kona block found on
Broadcom's mobile SoCs.
Signed-off-by: Tim Kryger <tim.kryger@...aro.org>
Reviewed-by: Matt Porter <matt.porter@...aro.org>
---
.../devicetree/bindings/i2c/i2c-bcm-kona.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt b/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt
new file mode 100644
index 0000000..1b87b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt
@@ -0,0 +1,35 @@
+Broadcom Kona Family I2C
+=========================
+
+This I2C controller is used in the following Broadcom SoCs:
+
+ BCM11130
+ BCM11140
+ BCM11351
+ BCM28145
+ BCM28155
+
+Required Properties
+-------------------
+- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: The interrupt number used by the controller
+- clocks: clock specifier for the kona i2c external clock
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Refer to clocks/clock-bindings.txt for generic clock consumer
+properties.
+
+Example:
+
+i2c@...16000 {
+ compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
+ reg = <0x3e016000 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bsc1_clk>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
--
1.8.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists