lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1384523303-25943-2-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Date:	Fri, 15 Nov 2013 13:48:23 +0000
From:	Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
To:	broonie@...nel.org
Cc:	lgirdwood@...il.org, patches@...nsource.wolfsonmicro.com,
	linux-kernel@...r.kernel.org,
	Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
Subject: [PATCH v2 2/2] regulator: arizona-micsupp: Correct wm5110 voltage selection

wm5110 provides different voltage configurations than the other Arizona
parts, this patch adds support for this into the regulator driver. Also
fixup the default for the configuration register for wm5110.

Signed-off-by: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
---
 drivers/regulator/arizona-micsupp.c |   54 +++++++++++++++++++++++++++++++++-
 1 files changed, 52 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index 3c75bf8..034ece7 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -144,6 +144,33 @@ static const struct regulator_desc arizona_micsupp = {
 	.owner = THIS_MODULE,
 };
 
+static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+	REGULATOR_LINEAR_RANGE(900000,  0,    0x14, 25000),
+	REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
+};
+
+static const struct regulator_desc arizona_micsupp_ext = {
+	.name = "MICVDD",
+	.supply_name = "CPVDD",
+	.type = REGULATOR_VOLTAGE,
+	.n_voltages = 40,
+	.ops = &arizona_micsupp_ops,
+
+	.vsel_reg = ARIZONA_LDO2_CONTROL_1,
+	.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+	.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.enable_mask = ARIZONA_CPMIC_ENA,
+	.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.bypass_mask = ARIZONA_CPMIC_BYPASS,
+
+	.linear_ranges = arizona_micsupp_ext_ranges,
+	.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
 static const struct regulator_init_data arizona_micsupp_default = {
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
@@ -156,9 +183,22 @@ static const struct regulator_init_data arizona_micsupp_default = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_init_data arizona_micsupp_ext_default = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_BYPASS,
+		.min_uV = 900000,
+		.max_uV = 3300000,
+	},
+
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_micsupp_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *desc;
 	struct regulator_config config = { };
 	struct arizona_micsupp *micsupp;
 	int ret;
@@ -177,7 +217,17 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 	 * default init_data for it.  This will be overridden with
 	 * platform data if provided.
 	 */
-	micsupp->init_data = arizona_micsupp_default;
+	switch (arizona->type) {
+	case WM5110:
+		desc = &arizona_micsupp_ext;
+		micsupp->init_data = arizona_micsupp_ext_default;
+		break;
+	default:
+		desc = &arizona_micsupp;
+		micsupp->init_data = arizona_micsupp_default;
+		break;
+	}
+
 	micsupp->init_data.consumer_supplies = &micsupp->supply;
 	micsupp->supply.supply = "MICVDD";
 	micsupp->supply.dev_name = dev_name(arizona->dev);
@@ -196,7 +246,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 			   ARIZONA_CPMIC_BYPASS, 0);
 
 	micsupp->regulator = devm_regulator_register(&pdev->dev,
-						     &arizona_micsupp,
+						     desc,
 						     &config);
 	if (IS_ERR(micsupp->regulator)) {
 		ret = PTR_ERR(micsupp->regulator);
-- 
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ