[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1384770649-8593-1-git-send-email-treding@nvidia.com>
Date: Mon, 18 Nov 2013 11:30:47 +0100
From: Thierry Reding <thierry.reding@...il.com>
To: Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Rhyland Klein <rklein@...dia.com>,
Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>
Subject: [PATCH 1/3] mfd: cros ec: spi: Add delay for raising CS
From: Rhyland Klein <rklein@...dia.com>
The EC has specific timing it requires. Add support for an optional delay
after raising CS to fix timing issues. This is configurable based on
a DT property "google,cros-ec-spi-msg-delay".
If this property isn't set, then no delay will be added. However, if set
it will cause a delay equal to the value passed to it to be inserted at
the end of a transaction.
Signed-off-by: Rhyland Klein <rklein@...dia.com>
Reviewed-by: Bernie Thompson <bhthompson@...omium.org>
Reviewed-by: Andrew Bresticker <abrestic@...omium.org>
Cc: Rob Herring <rob.herring@...xeda.com>
Cc: Pawel Moll <pawel.moll@....com>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
Signed-off-by: Thierry Reding <treding@...dia.com>
---
Documentation/devicetree/bindings/mfd/cros-ec.txt | 4 +++
drivers/mfd/cros_ec_spi.c | 30 +++++++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 5f229c5f6da9..fb3034a87ae0 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -17,6 +17,10 @@ Required properties (SPI):
- compatible: "google,cros-ec-spi"
- reg: SPI chip select
+Optional properties (SPI):
+- google,cros-ec-spi-msg-delay: This property is how long of a delay, in usecs,
+ to use on the last transfer of a message, to force time between transactions.
+
Required properties (LPC):
- compatible: "google,cros-ec-lpc"
- reg: List of (IO address, size) pairs defining the interface uses
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 367ccb58ecb1..d05349a7381e 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/mfd/cros_ec.h>
#include <linux/mfd/cros_ec_commands.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
@@ -61,10 +62,13 @@
* @spi: SPI device we are connected to
* @last_transfer_ns: time that we last finished a transfer, or 0 if there
* if no record
+ * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
+ * is sent when we want to turn off CS at the end of a transaction.
*/
struct cros_ec_spi {
struct spi_device *spi;
s64 last_transfer_ns;
+ unsigned int end_of_msg_delay;
};
static void debug_packet(struct device *dev, const char *name, u8 *ptr,
@@ -235,6 +239,17 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
/* turn off CS */
spi_message_init(&msg);
+
+ if (ec_spi->end_of_msg_delay) {
+ /*
+ * Add delay for last transaction, to ensure the rising edge
+ * doesn't come too soon after the end of the data.
+ */
+ memset(&trans, '\0', sizeof(trans));
+ trans.delay_usecs = ec_spi->end_of_msg_delay;
+ spi_message_add_tail(&trans, &msg);
+ }
+
final_ret = spi_sync(ec_spi->spi, &msg);
ktime_get_ts(&ts);
ec_spi->last_transfer_ns = timespec_to_ns(&ts);
@@ -281,6 +296,17 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
return 0;
}
+static void cros_ec_probe_spi_dt(struct cros_ec_spi *ec_spi, struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ u32 val;
+ int ret;
+
+ ret = of_property_read_u32(np, "google,cros-ec-spi-msg-delay", &val);
+ if (!ret)
+ ec_spi->end_of_msg_delay = val;
+}
+
static int cros_ec_probe_spi(struct spi_device *spi)
{
struct device *dev = &spi->dev;
@@ -302,6 +328,10 @@ static int cros_ec_probe_spi(struct spi_device *spi)
if (!ec_dev)
return -ENOMEM;
+ /* Check for any DT properties */
+ if (IS_ENABLED(CONFIG_OF) && dev->of_node)
+ cros_ec_probe_spi_dt(ec_spi, dev);
+
spi_set_drvdata(spi, ec_dev);
ec_dev->name = "SPI";
ec_dev->dev = dev;
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists