[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5289D23B.6090101@overkiz.com>
Date: Mon, 18 Nov 2013 09:39:23 +0100
From: boris brezillon <b.brezillon@...rkiz.com>
To: Boris BREZILLON <b.brezillon@...rkiz.com>,
Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Ian Campbell <ian.campbell@...rix.com>,
Russell King <linux@....linux.org.uk>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
Nicolas Ferre <nicolas.ferre@...el.com>,
Joachim Eastwood <manabian@...il.com>
CC: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/9] ARM: at91/dt: add ethernet phy to at91rm9200ek board
On 28/08/2013 13:03, Boris BREZILLON wrote:
> Add ethernet phy node in at91rm9200ek.dts.
> The reg register is not specified, as it may differ depending on the init
> process of the board:
> ADDR0/1 phy pins are connected to PA13/14 rm9200 pins. Which means the phy
> will take its address from these pins during the reset process.
>
> The macb driver will launch a full scan on the mdio bus to discover the phy
> address.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
> ---
> arch/arm/boot/dts/at91rm9200ek.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
> index d2d72c3..37b0880 100644
> --- a/arch/arm/boot/dts/at91rm9200ek.dts
> +++ b/arch/arm/boot/dts/at91rm9200ek.dts
> @@ -47,6 +47,11 @@
> macb0: ethernet@...bc000 {
> phy-mode = "rmii";
> status = "okay";
> +
> + phy0: ethernet-phy {
> + interrupt-parent = <&pioC>;
> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
rm9200 pio controller does not support specific edge detection.
The line above should be replaced with:
interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
or
interrupts = <4 0>;
Nicolas, I know you were planning to push this patch for 3.14.
If you haven't done it yet (or if you changed your mind), I can send a
new version including this fix.
> + };
> };
>
> usb1: gadget@...b0000 {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists