[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <528AF349.9070902@roeck-us.net>
Date: Mon, 18 Nov 2013 21:12:41 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Ivan Khoronzhuk <ivan.khoronzhuk@...com>,
Santosh Shilimkar <santosh.shilimkar@...com>,
Wim Van Sebroeck <wim@...ana.be>,
Sekhar Nori <nsekhar@...com>, linux-watchdog@...r.kernel.org,
devicetree@...r.kernel.org
CC: Grant Likely <grant.likely@...aro.org>,
Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Kumar Gala <galak@...nel.crashing.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Strashko Grygorii <grygorii.strashko@...com>
Subject: Re: [PATCH 1/6] watchdog: davinci: change driver to use WDT core
On 11/18/2013 09:18 AM, Ivan Khoronzhuk wrote:
> To reduce code duplicate and increase code readability use WDT core
> code to handle WDT interface.
>
> Remove io_lock as the WDT core uses mutex to lock each wdt device.
> Remove wdt_state as the WDT core track state with its own variable.
>
> The watchdog_init_timeout() can read timeout value from timeout-sec
> property if the passed value is out of bounds. The heartbeat is
> initialized in next way. If heartbeat is not set thought module
> parameter, try to read it's value from WDT node timeout-sec property.
> If node has no one, use default value.
>
> The heartbeat is hold in wdd->timeout by WDT core, so use it in
> order to set timeout period.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@...com>
> ---
> drivers/watchdog/Kconfig | 2 +
> drivers/watchdog/davinci_wdt.c | 152 ++++++++++------------------------------
> 2 files changed, 39 insertions(+), 115 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index d1d53f3..d7db13d 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -271,6 +271,8 @@ config IOP_WATCHDOG
> config DAVINCI_WATCHDOG
> tristate "DaVinci watchdog"
> depends on ARCH_DAVINCI
> + select WATCHDOG_CORE
> + select WATCHDOG_NOWAYOUT
Is this mandatory, ie is it correct that the watchdog can not be stopped once started ?
Assuming it is,
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
> help
> Say Y here if to include support for the watchdog timer
> in the DaVinci DM644x/DM646x processors.
> diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
> index bead774..cb9e8c5 100644
> --- a/drivers/watchdog/davinci_wdt.c
> +++ b/drivers/watchdog/davinci_wdt.c
> @@ -3,7 +3,7 @@
> *
> * Watchdog driver for DaVinci DM644x/DM646x processors
> *
> - * Copyright (C) 2006 Texas Instruments.
> + * Copyright (C) 2006-2013 Texas Instruments.
> *
> * 2007 (c) MontaVista Software, Inc. This file is licensed under
> * the terms of the GNU General Public License version 2. This program
> @@ -15,18 +15,12 @@
> #include <linux/moduleparam.h>
> #include <linux/types.h>
> #include <linux/kernel.h>
> -#include <linux/fs.h>
> -#include <linux/miscdevice.h>
> #include <linux/watchdog.h>
> #include <linux/init.h>
> -#include <linux/bitops.h>
> #include <linux/platform_device.h>
> -#include <linux/spinlock.h>
> -#include <linux/uaccess.h>
> #include <linux/io.h>
> #include <linux/device.h>
> #include <linux/clk.h>
> -#include <linux/slab.h>
> #include <linux/err.h>
>
> #define MODULE_NAME "DAVINCI-WDT: "
> @@ -61,31 +55,12 @@
> #define WDKEY_SEQ0 (0xa5c6 << 16)
> #define WDKEY_SEQ1 (0xda7e << 16)
>
> -static int heartbeat = DEFAULT_HEARTBEAT;
> -
> -static DEFINE_SPINLOCK(io_lock);
> -static unsigned long wdt_status;
> -#define WDT_IN_USE 0
> -#define WDT_OK_TO_CLOSE 1
> -#define WDT_REGION_INITED 2
> -#define WDT_DEVICE_INITED 3
> -
> +static int heartbeat;
> static void __iomem *wdt_base;
> struct clk *wdt_clk;
> +static struct watchdog_device wdt_wdd;
>
> -static void wdt_service(void)
> -{
> - spin_lock(&io_lock);
> -
> - /* put watchdog in service state */
> - iowrite32(WDKEY_SEQ0, wdt_base + WDTCR);
> - /* put watchdog in active state */
> - iowrite32(WDKEY_SEQ1, wdt_base + WDTCR);
> -
> - spin_unlock(&io_lock);
> -}
> -
> -static void wdt_enable(void)
> +static int davinci_wdt_start(struct watchdog_device *wdd)
> {
> u32 tgcr;
> u32 timer_margin;
> @@ -93,8 +68,6 @@ static void wdt_enable(void)
>
> wdt_freq = clk_get_rate(wdt_clk);
>
> - spin_lock(&io_lock);
> -
> /* disable, internal clock source */
> iowrite32(0, wdt_base + TCR);
> /* reset timer, set mode to 64-bit watchdog, and unreset */
> @@ -105,9 +78,9 @@ static void wdt_enable(void)
> iowrite32(0, wdt_base + TIM12);
> iowrite32(0, wdt_base + TIM34);
> /* set timeout period */
> - timer_margin = (((u64)heartbeat * wdt_freq) & 0xffffffff);
> + timer_margin = (((u64)wdd->timeout * wdt_freq) & 0xffffffff);
> iowrite32(timer_margin, wdt_base + PRD12);
> - timer_margin = (((u64)heartbeat * wdt_freq) >> 32);
> + timer_margin = (((u64)wdd->timeout * wdt_freq) >> 32);
> iowrite32(timer_margin, wdt_base + PRD34);
> /* enable run continuously */
> iowrite32(ENAMODE12_PERIODIC, wdt_base + TCR);
> @@ -119,84 +92,28 @@ static void wdt_enable(void)
> iowrite32(WDKEY_SEQ0 | WDEN, wdt_base + WDTCR);
> /* put watchdog in active state */
> iowrite32(WDKEY_SEQ1 | WDEN, wdt_base + WDTCR);
> -
> - spin_unlock(&io_lock);
> -}
> -
> -static int davinci_wdt_open(struct inode *inode, struct file *file)
> -{
> - if (test_and_set_bit(WDT_IN_USE, &wdt_status))
> - return -EBUSY;
> -
> - wdt_enable();
> -
> - return nonseekable_open(inode, file);
> + return 0;
> }
>
> -static ssize_t
> -davinci_wdt_write(struct file *file, const char *data, size_t len,
> - loff_t *ppos)
> +static int davinci_wdt_ping(struct watchdog_device *wdd)
> {
> - if (len)
> - wdt_service();
> -
> - return len;
> + /* put watchdog in service state */
> + iowrite32(WDKEY_SEQ0, wdt_base + WDTCR);
> + /* put watchdog in active state */
> + iowrite32(WDKEY_SEQ1, wdt_base + WDTCR);
> + return 0;
> }
>
> -static const struct watchdog_info ident = {
> +static const struct watchdog_info davinci_wdt_info = {
> .options = WDIOF_KEEPALIVEPING,
> .identity = "DaVinci Watchdog",
> };
>
> -static long davinci_wdt_ioctl(struct file *file,
> - unsigned int cmd, unsigned long arg)
> -{
> - int ret = -ENOTTY;
> -
> - switch (cmd) {
> - case WDIOC_GETSUPPORT:
> - ret = copy_to_user((struct watchdog_info *)arg, &ident,
> - sizeof(ident)) ? -EFAULT : 0;
> - break;
> -
> - case WDIOC_GETSTATUS:
> - case WDIOC_GETBOOTSTATUS:
> - ret = put_user(0, (int *)arg);
> - break;
> -
> - case WDIOC_KEEPALIVE:
> - wdt_service();
> - ret = 0;
> - break;
> -
> - case WDIOC_GETTIMEOUT:
> - ret = put_user(heartbeat, (int *)arg);
> - break;
> - }
> - return ret;
> -}
> -
> -static int davinci_wdt_release(struct inode *inode, struct file *file)
> -{
> - wdt_service();
> - clear_bit(WDT_IN_USE, &wdt_status);
> -
> - return 0;
> -}
> -
> -static const struct file_operations davinci_wdt_fops = {
> - .owner = THIS_MODULE,
> - .llseek = no_llseek,
> - .write = davinci_wdt_write,
> - .unlocked_ioctl = davinci_wdt_ioctl,
> - .open = davinci_wdt_open,
> - .release = davinci_wdt_release,
> -};
> -
> -static struct miscdevice davinci_wdt_miscdev = {
> - .minor = WATCHDOG_MINOR,
> - .name = "watchdog",
> - .fops = &davinci_wdt_fops,
> +static const struct watchdog_ops davinci_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = davinci_wdt_start,
> + .stop = davinci_wdt_ping,
> + .ping = davinci_wdt_ping,
> };
>
> static int davinci_wdt_probe(struct platform_device *pdev)
> @@ -204,6 +121,7 @@ static int davinci_wdt_probe(struct platform_device *pdev)
> int ret = 0;
> struct device *dev = &pdev->dev;
> struct resource *wdt_mem;
> + struct watchdog_device *wdd;
>
> wdt_clk = devm_clk_get(dev, NULL);
> if (WARN_ON(IS_ERR(wdt_clk)))
> @@ -211,29 +129,34 @@ static int davinci_wdt_probe(struct platform_device *pdev)
>
> clk_prepare_enable(wdt_clk);
>
> - if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
> - heartbeat = DEFAULT_HEARTBEAT;
> + wdd = &wdt_wdd;
> + wdd->info = &davinci_wdt_info;
> + wdd->ops = &davinci_wdt_ops;
> + wdd->min_timeout = 1;
> + wdd->max_timeout = MAX_HEARTBEAT;
> + wdd->timeout = DEFAULT_HEARTBEAT;
> +
> + watchdog_init_timeout(wdd, heartbeat, dev);
> +
> + dev_info(dev, "heartbeat %d sec\n", wdd->timeout);
>
> - dev_info(dev, "heartbeat %d sec\n", heartbeat);
> + watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
>
> wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> wdt_base = devm_ioremap_resource(dev, wdt_mem);
> if (IS_ERR(wdt_base))
> return PTR_ERR(wdt_base);
>
> - ret = misc_register(&davinci_wdt_miscdev);
> - if (ret < 0) {
> - dev_err(dev, "cannot register misc device\n");
> - } else {
> - set_bit(WDT_DEVICE_INITED, &wdt_status);
> - }
> + ret = watchdog_register_device(wdd);
> + if (ret < 0)
> + dev_err(dev, "cannot register watchdog device\n");
>
> return ret;
> }
>
> static int davinci_wdt_remove(struct platform_device *pdev)
> {
> - misc_deregister(&davinci_wdt_miscdev);
> + watchdog_unregister_device(&wdt_wdd);
> clk_disable_unprepare(wdt_clk);
>
> return 0;
> @@ -247,7 +170,7 @@ MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
>
> static struct platform_driver platform_wdt_driver = {
> .driver = {
> - .name = "watchdog",
> + .name = "davinci-wdt",
> .owner = THIS_MODULE,
> .of_match_table = davinci_wdt_of_match,
> },
> @@ -267,5 +190,4 @@ MODULE_PARM_DESC(heartbeat,
> __MODULE_STRING(DEFAULT_HEARTBEAT));
>
> MODULE_LICENSE("GPL");
> -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
> -MODULE_ALIAS("platform:watchdog");
> +MODULE_ALIAS("platform:davinci-wdt");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists