>From 54e9e48a9f878eb45f0cc6322415244d7a9f1598 Mon Sep 17 00:00:00 2001 From: yzhu1 Date: Fri, 22 Nov 2013 15:46:48 +0800 Subject: [PATCH 1/1] e1000: prevent oops when adapter is being closed and reset simultaneously This change is based on a similar change made to e1000e support in commit bb9e44d0d0f4 ("e1000e: prevent oops when adapter is being closed and reset simultaneously"). The same issue has also been observed on the older e1000 cards. Here, we have increased the RESET_COUNT value to 50 because there are too many accesses to e1000 nic on stress tests to e1000 nic, it is not enough to set RESET_COUT 25. Experimentation has shown that it is enough to set RESET_COUNT 50. Signed-off-by: yzhu1 --- drivers/net/ethernet/intel/e1000/e1000.h | 5 +++++ drivers/net/ethernet/intel/e1000/e1000_main.c | 9 +++++++++ 2 files changed, 14 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index 58c1472..0af4a8e 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -83,6 +83,11 @@ struct e1000_adapter; #define E1000_MAX_INTR 10 +/* + * Count for polling __E1000_RESET condition every 10-20msec. + */ +#define E1000_CHECK_RESET_COUNT 50 + /* TX/RX descriptor defines */ #define E1000_DEFAULT_TXD 256 #define E1000_MAX_TXD 256 diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index e386228..c0f5217 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1440,6 +1440,10 @@ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->flags) && count--) + usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); @@ -4963,6 +4967,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); if (netif_running(netdev)) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->flags) && count--) + usleep_range(10000, 20000); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); } -- 1.7.9.5