lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 22 Nov 2013 09:46:11 +0100
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	MyungJoo Ham <myungjoo.ham@...sung.com>,
	Chanwoo Choi <cw00.choi@...sung.com>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Lee Jones <lee.jones@...aro.org>,
	Anton Vorontsov <anton@...msg.org>,
	David Woodhouse <dwmw2@...radead.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>,
	Grant Likely <grant.likely@...aro.org>,
	Rob Herring <rob.herring@...xeda.com>,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	Pawel Moll <pawel.moll@....com>,
	Stephen Warren <swarren@...dotorg.org>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Rob Landley <rob@...dley.net>, linux-doc@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Cc:	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	Kyungmin Park <kyungmin.park@...sung.com>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>
Subject: [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim
 14577

MAX14577 chip is a multi-function device which includes MUIC,
charger and voltage regulator. The driver is located in drivers/mfd.

This patch adds regulator driver for MAX14577 chip. There are two
regulators in this chip:
1. Safeout LDO with constant voltage output of 4.9V. It can be only
   enabled or disabled.
2. Current regulator for the charger. It provides current from 90mA up
   to 950mA.
Driver supports Device Tree.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
 drivers/regulator/Kconfig    |    7 ++
 drivers/regulator/Makefile   |    1 +
 drivers/regulator/max14577.c |  272 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/max14577.h |    1 -
 4 files changed, 280 insertions(+), 1 deletion(-)
 create mode 100644 drivers/regulator/max14577.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ce785f4..11ee053 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -249,6 +249,13 @@ config REGULATOR_LP8788
 	help
 	  This driver supports LP8788 voltage regulator chip.
 
+config REGULATOR_MAX14577
+	tristate "Maxim 14577 regulator"
+	depends on MFD_MAX14577
+	help
+	  This driver controls a Maxim 14577 regulator via I2C bus.
+	  The regulators include safeout LDO and current regulator 'CHARGER'.
+
 config REGULATOR_MAX1586
 	tristate "Maxim 1586/1587 voltage regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 01c597e..654bd43 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
+obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c
new file mode 100644
index 0000000..d913bed
--- /dev/null
+++ b/drivers/regulator/max14577.c
@@ -0,0 +1,272 @@
+/*
+ * max14577.c - Regulator driver for the Maxim 14577
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Krzysztof Kozlowski <k.kozlowski@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/max14577.h>
+#include <linux/mfd/max14577-private.h>
+#include <linux/regulator/of_regulator.h>
+
+struct max14577_regulator {
+	struct device *dev;
+	struct max14577 *max14577;
+	struct regulator_dev **regulators;
+};
+
+static int max14577_reg_is_enabled(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+	struct regmap *rmap = rdev->regmap;
+	u8 reg_data;
+
+	switch (rid) {
+	case MAX14577_CHARGER:
+		max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
+		if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0)
+			return 0;
+		max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+		if ((reg_data & STATUS3_CGMBC_MASK) == 0)
+			return 0;
+		/* MBCHOSTEN and CGMBC are on */
+		return 1;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
+{
+	u8 reg_data;
+	struct regmap *rmap = rdev->regmap;
+
+	if (rdev_get_id(rdev) != MAX14577_CHARGER)
+		return -EINVAL;
+
+	max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, &reg_data);
+
+	if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0)
+		return MAX14577_REGULATOR_CURRENT_LIMIT_MIN;
+
+	reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >>
+			CHGCTRL4_MBCICHWRCH_SHIFT);
+	return MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
+		reg_data * MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP;
+}
+
+static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
+		int min_uA, int max_uA)
+{
+	int i, current_bits = 0xf;
+	u8 reg_data;
+
+	if (rdev_get_id(rdev) != MAX14577_CHARGER)
+		return -EINVAL;
+
+	if (min_uA > MAX14577_REGULATOR_CURRENT_LIMIT_MAX ||
+			max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_MIN)
+		return -EINVAL;
+
+	if (max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START) {
+		/* Less than 200 mA, so set 90mA (turn only Low Bit off) */
+		u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
+		return max14577_update_reg(rdev->regmap,
+				MAX14577_CHG_REG_CHG_CTRL4,
+				CHGCTRL4_MBCICHWRCL_MASK, reg_data);
+	}
+
+	/* max_uA is in range: <LIMIT_HIGH_START, inifinite>, so search for
+	 * valid current starting from LIMIT_MAX. */
+	for (i = MAX14577_REGULATOR_CURRENT_LIMIT_MAX;
+			i >= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START;
+			i -= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP) {
+		if (i <= max_uA)
+			break;
+		current_bits--;
+	}
+	BUG_ON(current_bits < 0); /* Cannot happen */
+	/* Turn Low Bit on (use range 200mA-950 mA) */
+	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
+	/* and set proper High Bits */
+	reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+
+	return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
+			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+			reg_data);
+}
+
+static struct regulator_ops max14577_safeout_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+static struct regulator_ops max14577_charger_ops = {
+	.is_enabled		= max14577_reg_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_current_limit	= max14577_reg_get_current_limit,
+	.set_current_limit	= max14577_reg_set_current_limit,
+};
+
+static struct regulator_desc supported_regulators[] = {
+	[MAX14577_SAFEOUT] = {
+		.name = "SAFEOUT",
+		.id = MAX14577_SAFEOUT,
+		.ops = &max14577_safeout_ops,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.n_voltages = 1,
+		.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
+		.enable_reg = MAX14577_REG_CONTROL2,
+		.enable_mask = CTRL2_SFOUTORD_MASK,
+	},
+	[MAX14577_CHARGER] = {
+		.name = "CHARGER",
+		.id = MAX14577_CHARGER,
+		.ops = &max14577_charger_ops,
+		.type = REGULATOR_CURRENT,
+		.owner = THIS_MODULE,
+		.enable_reg = MAX14577_CHG_REG_CHG_CTRL2,
+		.enable_mask = CHGCTRL2_MBCHOSTEN_MASK,
+	},
+};
+
+#ifdef CONFIG_OF
+static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
+					struct max14577_platform_data *pdata)
+{
+	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *np;
+	struct max14577_regulator_platform_data *reg_pdata;
+	struct of_regulator_match rmatch;
+	int i, ret;
+
+	np = of_get_child_by_name(max14577->dev->of_node, "regulators");
+	if (!np)
+		return -EINVAL;
+
+	reg_pdata = devm_kzalloc(&pdev->dev, sizeof(*reg_pdata) *
+			     ARRAY_SIZE(supported_regulators), GFP_KERNEL);
+	if (!reg_pdata)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
+		rmatch.name = supported_regulators[i].name;
+		ret = of_regulator_match(&pdev->dev, np, &rmatch, 1);
+		if (ret != 1)
+			continue;
+		dev_dbg(&pdev->dev, "Found regulator %d/%s\n",
+				supported_regulators[i].id,
+				supported_regulators[i].name);
+		reg_pdata[i].id = supported_regulators[i].id;
+		reg_pdata[i].initdata = rmatch.init_data;
+		reg_pdata[i].of_node = rmatch.of_node;
+	}
+
+	pdata->regulators = reg_pdata;
+
+	return 0;
+}
+#else
+static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
+					struct max14577_platform_data *pdata)
+{
+	return 0;
+}
+#endif
+
+static int max14577_regulator_probe(struct platform_device *pdev)
+{
+	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+	struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
+	int i, size;
+	struct regulator_config config = {};
+	struct regulator_dev **regulators;
+
+	if (!pdata) {
+		/* Parent must provide pdata */
+		dev_err(&pdev->dev, "No MFD driver platform data found.\n");
+		return -ENODEV;
+	}
+
+	if (max14577->dev->of_node) {
+		int ret = max14577_regulator_dt_parse_pdata(pdev, pdata);
+		if (ret)
+			return ret;
+	}
+
+	size = sizeof(struct regulator_dev *) * ARRAY_SIZE(supported_regulators);
+	regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!regulators) {
+		dev_err(&pdev->dev, "Cannot allocate memory for regulators\n");
+		return -ENOMEM;
+	}
+
+	config.dev = &pdev->dev;
+	config.regmap = max14577->regmap;
+
+	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
+		/*
+		 * Index of supported_regulators[] is also the id and must
+		 * match index of pdata->regulators[].
+		 */
+		config.init_data = pdata->regulators[i].initdata;
+		config.of_node = pdata->regulators[i].of_node;
+
+		regulators[i] = devm_regulator_register(&pdev->dev,
+				&supported_regulators[i], &config);
+		if (IS_ERR(regulators[i])) {
+			int ret = PTR_ERR(regulators[i]);
+			dev_err(&pdev->dev,
+					"Regulator init failed for ID %d with error: %d\n",
+					i, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver max14577_regulator_driver = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "max14577-regulator",
+		   },
+	.probe	= max14577_regulator_probe,
+};
+
+static int __init max14577_regulator_init(void)
+{
+	BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
+			MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(ARRAY_SIZE(supported_regulators) != MAX14577_REG_MAX);
+	return platform_driver_register(&max14577_regulator_driver);
+}
+subsys_initcall(max14577_regulator_init);
+
+static void __exit max14577_regulator_exit(void)
+{
+	platform_driver_unregister(&max14577_regulator_driver);
+}
+module_exit(max14577_regulator_exit);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@...sung.com>");
+MODULE_DESCRIPTION("MAXIM 14577 regulator driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/max14577.h b/include/linux/mfd/max14577.h
index 512d731..247b021 100644
--- a/include/linux/mfd/max14577.h
+++ b/include/linux/mfd/max14577.h
@@ -63,7 +63,6 @@ struct max14577_platform_data {
 
 	int (*set_gpio_pogo_cb) (int new_dev);
 
-	int num_regulators;
 	struct max14577_regulator_platform_data *regulators;
 };
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ