[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1385137380-28968-8-git-send-email-lee.jones@linaro.org>
Date: Fri, 22 Nov 2013 16:22:44 +0000
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
dwmw2@...radead.org, linux-mtd@...ts.infradead.org,
angus.clark@...com
Cc: linus.walleij@...aro.org, Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 07/23] mtd: st_spi_fsm: Add support for JEDEC ID extraction
Once we start supporting devices it will be handy go detect them
dynamically. This will be done using the chip's unique JEDEC ID. This
patch allows us to extract a device's JEDEC ID using the a predefined
FSM register write sequence.
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
drivers/mtd/devices/st_spi_fsm.c | 55 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 73c55b4..f937329 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -25,6 +25,22 @@
#include "st_spi_fsm.h"
+static struct stfsm_seq stfsm_seq_read_jedec = {
+ .data_size = TRANSFER_SIZE(8),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_RDID)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
static inline int stfsm_is_idle(struct stfsm *fsm)
{
return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10;
@@ -91,6 +107,42 @@ static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf,
}
}
+static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *const jedec)
+{
+ const struct stfsm_seq *seq = &stfsm_seq_read_jedec;
+ uint32_t tmp[2];
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_read_fifo(fsm, tmp, 8);
+
+ memcpy(jedec, tmp, 5);
+
+ stfsm_wait_seq(fsm);
+}
+
+static struct flash_info * stfsm_jedec_probe(struct stfsm *fsm)
+{
+ u16 ext_jedec;
+ u32 jedec;
+ u8 id[5];
+
+ stfsm_read_jedec(fsm, id);
+
+ jedec = id[0] << 16 | id[1] << 8 | id[2];
+ /*
+ * JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ */
+ ext_jedec = id[3] << 8 | id[4];
+
+ dev_dbg(fsm->dev, "JEDEC = 0x%08x [%02x %02x %02x %02x %02x]\n",
+ jedec, id[0], id[1], id[2], id[3], id[4]);
+
+ return NULL;
+}
+
static void stfsm_clear_fifo(struct stfsm *fsm)
{
uint32_t avail;
@@ -243,6 +295,9 @@ static int stfsm_probe(struct platform_device *pdev)
return ret;
}
+ /* Detect SPI FLASH device */
+ stfsm_jedec_probe(fsm);
+
platform_set_drvdata(pdev, fsm);
fsm->mtd.dev.parent = &pdev->dev;
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists