lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAErSpo5OAOtn9cbQeL7bvAjwUWmA1rYQM5R5G6R2P4VJo+Drrw@mail.gmail.com>
Date:	Fri, 22 Nov 2013 15:20:28 -0700
From:	Bjorn Helgaas <bhelgaas@...gle.com>
To:	"ethan.zhao" <ethan.kernel@...il.com>
Cc:	Yu Zhao <yu.zhao@...el.com>, Yinghai Lu <yinghai@...nel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] PCI: Init NumVFs register to zero in sriov_init()

On Wed, Nov 6, 2013 at 7:49 AM, ethan.zhao <ethan.kernel@...il.com> wrote:
> Though no specification about NumVFs register initial value after POST, to void the confusion
> lspci output as following before VF was enabled, we should clear the NumVFs value left by BIOS
> to zero:
>
> $lspci -vvv -s 03:00.0
> Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
> ~
> Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration-, Interrupt Message Number: 000
>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>                 IOVSta: Migration-
>                 Initial VFs: 64, Total VFs: 64, Number of VFs: 64, Function Dependency Link: 00
>                                                               ^dazed !
> ~
> Signed-off-by: ethan.zhao <ethan.kernel@...il.com>

Applied to my pci/misc branch for v3.14, thanks!

Bjorn

> ---
>  drivers/pci/iov.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index de8ffac..a4941ad 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -439,6 +439,8 @@ static int sriov_init(struct pci_dev *dev, int pos)
>
>  found:
>         pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl);
> +       /* VF Enable is cleared, so we could init the NumVFs register to 0 */
> +       pci_write_config_word(dev, pos + PCI_SRIOV_NUM_VF, 0);
>         pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset);
>         pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride);
>         if (!offset || (total > 1 && !stride))
> --
> 1.8.3.4 (Apple Git-47)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ