Message-ID: <CAL1ERfNWXFmKFbVf2H1G7A=rVfxh+0ScN_yn_YcH=VsUr3bVjg@mail.gmail.com>
Date:	Sat, 23 Nov 2013 10:37:03 +0800
From:	Weijie Yang <weijie.yang.kh@...il.com>
To:	Dan Streetman <ddstreet@...e.org>
Cc:	Seth Jennings <sjennings@...iantweb.net>, linux-mm@...ck.org,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Bob Liu <bob.liu@...cle.com>, Minchan Kim <minchan@...nel.org>,
	Weijie Yang <weijie.yang@...sung.com>
Subject: Re: [PATCH v3] mm/zswap: change zswap to writethrough cache

Hello Dan,

On Sat, Nov 23, 2013 at 6:10 AM, Dan Streetman <ddstreet@...e.org> wrote:
> Currently, zswap is writeback cache; stored pages are not sent
> to swap disk, and when zswap wants to evict old pages it must
> first write them back to swap cache/disk manually.  This avoids
> swap out disk I/O up front, but only moves that disk I/O to
> the writeback case (for pages that are evicted), and adds the
> overhead of having to uncompress the evicted pages, and adds the
> need for an additional free page (to store the uncompressed page)
> at a time of likely high memory pressure.  Additionally, being
> writeback adds complexity to zswap by having to perform the
> writeback on page eviction.
>
> This changes zswap to writethrough cache by enabling
> frontswap_writethrough() before registering, so that any
> successful page store will also be written to swap disk.  All the
> writeback code is removed since it is no longer needed, and the
> only operation during a page eviction is now to remove the entry
> from the tree and free it.

I agree with Seth, It is not good to embedded device.
May be we can find its place in others like server.
I guess it is good to medium workload when swap io is not frequent.

My suggestion is would you please make it configurable so that user
can choice to use writethrough or writeback mode?

Regards,

> Signed-off-by: Dan Streetman <ddstreet@...e.org>
> ---
>
> I still owe the results of testing pre-patch and post-patch;
> I don't think I'll have SPECjbb results today, but I do have a
> small test program I can send with results of nozswap,
> zswap writeback, and zswap writethrough; I'll send the SPECjbb
> results also when I get them.
>
> Changes since v2:
> change the evict function to remove the entry from the tree,
> and avoid checking if the entry is in use by load.  It is ok
> to return success for the eviction even if load is using the entry
> as zbud does not use the evict function return value in any significant
> way (I'll submit a future patch to remove the return value entirely
> from the evict function).
>
> Changes since v1:
> update to apply to latest -tip, previous patch missed several recent
> zswap patches.
>
>
>  mm/zswap.c | 209 ++++++-------------------------------------------------------
>  1 file changed, 19 insertions(+), 190 deletions(-)
>
> diff --git a/mm/zswap.c b/mm/zswap.c
> index e55bab9..fc35a7a 100644
> --- a/mm/zswap.c
> +++ b/mm/zswap.c
> @@ -39,7 +39,6 @@
>  #include <linux/mm_types.h>
>  #include <linux/page-flags.h>
>  #include <linux/swapops.h>
> -#include <linux/writeback.h>
>  #include <linux/pagemap.h>
>
>  /*********************************
> @@ -59,8 +58,8 @@ static atomic_t zswap_stored_pages = ATOMIC_INIT(0);
>
>  /* Pool limit was hit (see zswap_max_pool_percent) */
>  static u64 zswap_pool_limit_hit;
> -/* Pages written back when pool limit was reached */
> -static u64 zswap_written_back_pages;
> +/* Pages evicted when pool limit was reached */
> +static u64 zswap_evicted_pages;
>  /* Store failed due to a reclaim failure after pool limit was reached */
>  static u64 zswap_reject_reclaim_fail;
>  /* Compressed page was too big for the allocator to (optimally) store */
> @@ -160,7 +159,7 @@ static void zswap_comp_exit(void)
>   * rbnode - links the entry into red-black tree for the appropriate swap type
>   * refcount - the number of outstanding reference to the entry. This is needed
>   *            to protect against premature freeing of the entry by code
> - *            concurent calls to load, invalidate, and writeback.  The lock
> + *            concurent calls to load, invalidate, and evict.  The lock
>   *            for the zswap_tree structure that contains the entry must
>   *            be held while changing the refcount.  Since the lock must
>   *            be held, there is no reason to also make refcount atomic.
> @@ -412,132 +411,19 @@ static bool zswap_is_full(void)
>  }
>
>  /*********************************
> -* writeback code
> +* evict
>  **********************************/
> -/* return enum for zswap_get_swap_cache_page */
> -enum zswap_get_swap_ret {
> -       ZSWAP_SWAPCACHE_NEW,
> -       ZSWAP_SWAPCACHE_EXIST,
> -       ZSWAP_SWAPCACHE_FAIL,
> -};
>
>  /*
> - * zswap_get_swap_cache_page
> - *
> - * This is an adaption of read_swap_cache_async()
> - *
> - * This function tries to find a page with the given swap entry
> - * in the swapper_space address space (the swap cache).  If the page
> - * is found, it is returned in retpage.  Otherwise, a page is allocated,
> - * added to the swap cache, and returned in retpage.
> - *
> - * If success, the swap cache page is returned in retpage
> - * Returns ZSWAP_SWAPCACHE_EXIST if page was already in the swap cache
> - * Returns ZSWAP_SWAPCACHE_NEW if the new page needs to be populated,
> - *     the new page is added to swapcache and locked
> - * Returns ZSWAP_SWAPCACHE_FAIL on error
> + * This is called from zbud to remove an entry that is being evicted.
>   */
> -static int zswap_get_swap_cache_page(swp_entry_t entry,
> -                               struct page **retpage)
> -{
> -       struct page *found_page, *new_page = NULL;
> -       struct address_space *swapper_space = swap_address_space(entry);
> -       int err;
> -
> -       *retpage = NULL;
> -       do {
> -               /*
> -                * First check the swap cache.  Since this is normally
> -                * called after lookup_swap_cache() failed, re-calling
> -                * that would confuse statistics.
> -                */
> -               found_page = find_get_page(swapper_space, entry.val);
> -               if (found_page)
> -                       break;
> -
> -               /*
> -                * Get a new page to read into from swap.
> -                */
> -               if (!new_page) {
> -                       new_page = alloc_page(GFP_KERNEL);
> -                       if (!new_page)
> -                               break; /* Out of memory */
> -               }
> -
> -               /*
> -                * call radix_tree_preload() while we can wait.
> -                */
> -               err = radix_tree_preload(GFP_KERNEL);
> -               if (err)
> -                       break;
> -
> -               /*
> -                * Swap entry may have been freed since our caller observed it.
> -                */
> -               err = swapcache_prepare(entry);
> -               if (err == -EEXIST) { /* seems racy */
> -                       radix_tree_preload_end();
> -                       continue;
> -               }
> -               if (err) { /* swp entry is obsolete ? */
> -                       radix_tree_preload_end();
> -                       break;
> -               }
> -
> -               /* May fail (-ENOMEM) if radix-tree node allocation failed. */
> -               __set_page_locked(new_page);
> -               SetPageSwapBacked(new_page);
> -               err = __add_to_swap_cache(new_page, entry);
> -               if (likely(!err)) {
> -                       radix_tree_preload_end();
> -                       lru_cache_add_anon(new_page);
> -                       *retpage = new_page;
> -                       return ZSWAP_SWAPCACHE_NEW;
> -               }
> -               radix_tree_preload_end();
> -               ClearPageSwapBacked(new_page);
> -               __clear_page_locked(new_page);
> -               /*
> -                * add_to_swap_cache() doesn't return -EEXIST, so we can safely
> -                * clear SWAP_HAS_CACHE flag.
> -                */
> -               swapcache_free(entry, NULL);
> -       } while (err != -ENOMEM);
> -
> -       if (new_page)
> -               page_cache_release(new_page);
> -       if (!found_page)
> -               return ZSWAP_SWAPCACHE_FAIL;
> -       *retpage = found_page;
> -       return ZSWAP_SWAPCACHE_EXIST;
> -}
> -
> -/*
> - * Attempts to free an entry by adding a page to the swap cache,
> - * decompressing the entry data into the page, and issuing a
> - * bio write to write the page back to the swap device.
> - *
> - * This can be thought of as a "resumed writeback" of the page
> - * to the swap device.  We are basically resuming the same swap
> - * writeback path that was intercepted with the frontswap_store()
> - * in the first place.  After the page has been decompressed into
> - * the swap cache, the compressed version stored by zswap can be
> - * freed.
> - */
> -static int zswap_writeback_entry(struct zbud_pool *pool, unsigned long handle)
> +static int zswap_evict_entry(struct zbud_pool *pool, unsigned long handle)
>  {
>         struct zswap_header *zhdr;
>         swp_entry_t swpentry;
>         struct zswap_tree *tree;
>         pgoff_t offset;
>         struct zswap_entry *entry;
> -       struct page *page;
> -       u8 *src, *dst;
> -       unsigned int dlen;
> -       int ret;
> -       struct writeback_control wbc = {
> -               .sync_mode = WB_SYNC_NONE,
> -       };
>
>         /* extract swpentry from data */
>         zhdr = zbud_map(pool, handle);
> @@ -547,85 +433,27 @@ static int zswap_writeback_entry(struct zbud_pool *pool, unsigned long handle)
>         offset = swp_offset(swpentry);
>         BUG_ON(pool != tree->pool);
>
> -       /* find and ref zswap entry */
> +       /* find zswap entry */
>         spin_lock(&tree->lock);
> -       entry = zswap_entry_find_get(&tree->rbroot, offset);
> +       entry = zswap_rb_search(&tree->rbroot, offset);
>         if (!entry) {
>                 /* entry was invalidated */
>                 spin_unlock(&tree->lock);
>                 return 0;
>         }
> -       spin_unlock(&tree->lock);
>         BUG_ON(offset != entry->offset);
>
> -       /* try to allocate swap cache page */
> -       switch (zswap_get_swap_cache_page(swpentry, &page)) {
> -       case ZSWAP_SWAPCACHE_FAIL: /* no memory or invalidate happened */
> -               ret = -ENOMEM;
> -               goto fail;
> -
> -       case ZSWAP_SWAPCACHE_EXIST:
> -               /* page is already in the swap cache, ignore for now */
> -               page_cache_release(page);
> -               ret = -EEXIST;
> -               goto fail;
> -
> -       case ZSWAP_SWAPCACHE_NEW: /* page is locked */
> -               /* decompress */
> -               dlen = PAGE_SIZE;
> -               src = (u8 *)zbud_map(tree->pool, entry->handle) +
> -                       sizeof(struct zswap_header);
> -               dst = kmap_atomic(page);
> -               ret = zswap_comp_op(ZSWAP_COMPOP_DECOMPRESS, src,
> -                               entry->length, dst, &dlen);
> -               kunmap_atomic(dst);
> -               zbud_unmap(tree->pool, entry->handle);
> -               BUG_ON(ret);
> -               BUG_ON(dlen != PAGE_SIZE);
> -
> -               /* page is up to date */
> -               SetPageUptodate(page);
> -       }
> -
> -       /* move it to the tail of the inactive list after end_writeback */
> -       SetPageReclaim(page);
> -
> -       /* start writeback */
> -       __swap_writepage(page, &wbc, end_swap_bio_write);
> -       page_cache_release(page);
> -       zswap_written_back_pages++;
> +       /* remove from rbtree */
> +       zswap_rb_erase(&tree->rbroot, entry);
>
> -       spin_lock(&tree->lock);
> -       /* drop local reference */
> +       /* drop initial reference */
>         zswap_entry_put(tree, entry);
>
> -       /*
> -       * There are two possible situations for entry here:
> -       * (1) refcount is 1(normal case),  entry is valid and on the tree
> -       * (2) refcount is 0, entry is freed and not on the tree
> -       *     because invalidate happened during writeback
> -       *  search the tree and free the entry if find entry
> -       */
> -       if (entry == zswap_rb_search(&tree->rbroot, offset))
> -               zswap_entry_put(tree, entry);
> -       spin_unlock(&tree->lock);
> -
> -       goto end;
> +       zswap_evicted_pages++;
>
> -       /*
> -       * if we get here due to ZSWAP_SWAPCACHE_EXIST
> -       * a load may happening concurrently
> -       * it is safe and okay to not free the entry
> -       * if we free the entry in the following put
> -       * it it either okay to return !0
> -       */
> -fail:
> -       spin_lock(&tree->lock);
> -       zswap_entry_put(tree, entry);
>         spin_unlock(&tree->lock);
>
> -end:
> -       return ret;
> +       return 0;
>  }
>
>  /*********************************
> @@ -744,7 +572,7 @@ static int zswap_frontswap_load(unsigned type, pgoff_t offset,
>         spin_lock(&tree->lock);
>         entry = zswap_entry_find_get(&tree->rbroot, offset);
>         if (!entry) {
> -               /* entry was written back */
> +               /* entry was evicted */
>                 spin_unlock(&tree->lock);
>                 return -1;
>         }
> @@ -778,7 +606,7 @@ static void zswap_frontswap_invalidate_page(unsigned type, pgoff_t offset)
>         spin_lock(&tree->lock);
>         entry = zswap_rb_search(&tree->rbroot, offset);
>         if (!entry) {
> -               /* entry was written back */
> +               /* entry was evicted */
>                 spin_unlock(&tree->lock);
>                 return;
>         }
> @@ -814,7 +642,7 @@ static void zswap_frontswap_invalidate_area(unsigned type)
>  }
>
>  static struct zbud_ops zswap_zbud_ops = {
> -       .evict = zswap_writeback_entry
> +       .evict = zswap_evict_entry
>  };
>
>  static void zswap_frontswap_init(unsigned type)
> @@ -873,8 +701,8 @@ static int __init zswap_debugfs_init(void)
>                         zswap_debugfs_root, &zswap_reject_kmemcache_fail);
>         debugfs_create_u64("reject_compress_poor", S_IRUGO,
>                         zswap_debugfs_root, &zswap_reject_compress_poor);
> -       debugfs_create_u64("written_back_pages", S_IRUGO,
> -                       zswap_debugfs_root, &zswap_written_back_pages);
> +       debugfs_create_u64("evicted_pages", S_IRUGO,
> +                       zswap_debugfs_root, &zswap_evicted_pages);
>         debugfs_create_u64("duplicate_entry", S_IRUGO,
>                         zswap_debugfs_root, &zswap_duplicate_entry);
>         debugfs_create_u64("pool_pages", S_IRUGO,
> @@ -919,6 +747,7 @@ static int __init init_zswap(void)
>                 pr_err("per-cpu initialization failed\n");
>                 goto pcpufail;
>         }
> +       frontswap_writethrough(true);
>         frontswap_register_ops(&zswap_frontswap_ops);
>         if (zswap_debugfs_init())
>                 pr_warn("debugfs initialization failed\n");
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists