Message-ID: <20131124141211.GH18477@ns203013.ovh.net>
Date:	Sun, 24 Nov 2013 15:12:11 +0100
From:	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
To:	Stefan Kristiansson <stefan.kristiansson@...nalahti.fi>
Cc:	linux-kernel@...r.kernel.org, linux-fbdev@...r.kernel.org,
	tomi.valkeinen@...com
Subject: Re: [PATCH v3] video: add OpenCores VGA/LCD framebuffer driver

On 06:34 Fri 22 Nov     , Stefan Kristiansson wrote:
> This adds support for the VGA/LCD core available from OpenCores:
> http://opencores.org/project,vga_lcd
> 
> The driver have been tested together with both OpenRISC and
> ARM (socfpga) processors.
> 
> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@...nalahti.fi>

Tomi hold on this one I need check fee stuff on it
> ---
> Changes in v2:
> - Add Microblaze as an example user and fix a typo in Xilinx Zynq
> 
> Changes in v3:
> - Use devm_kzalloc instead of kzalloc
> - Remove superflous MODULE #ifdef
> ---
>  drivers/video/Kconfig  |  17 ++
>  drivers/video/Makefile |   1 +
>  drivers/video/ocfb.c   | 471 +++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 489 insertions(+)
>  create mode 100644 drivers/video/ocfb.c
> 
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 84b685f..3b3f31e 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -979,6 +979,23 @@ config FB_PVR2
>  	  (<file:drivers/video/pvr2fb.c>). Please see the file
>  	  <file:Documentation/fb/pvr2fb.txt>.
>  
> +config FB_OPENCORES
> +	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
> +	depends on FB
> +	select FB_CFB_FILLRECT
> +	select FB_CFB_COPYAREA
> +	select FB_CFB_IMAGEBLIT
> +	default n
non need

Best Regards,
J.
> +	help
> +	  This enables support for the OpenCores VGA/LCD core.
> +
> +	  The OpenCores VGA/LCD core is typically used together with
> +	  softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
> +	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
> +
> +	  The source code and specification for the core is available at
> +	  <http://opencores.org/project,vga_lcd>
> +
>  config FB_S1D13XXX
>  	tristate "Epson S1D13XXX framebuffer support"
>  	depends on FB
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index e8bae8d..ae17ddf 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -150,6 +150,7 @@ obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
>  obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
>  obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
>  obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
> +obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
>  
>  # Platform or fallback drivers go here
>  obj-$(CONFIG_FB_UVESA)            += uvesafb.o
> diff --git a/drivers/video/ocfb.c b/drivers/video/ocfb.c
> new file mode 100644
> index 0000000..3bf5f67
> --- /dev/null
> +++ b/drivers/video/ocfb.c
> @@ -0,0 +1,471 @@
> +/*
> + * OpenCores VGA/LCD 2.0 core frame buffer driver
> + *
> + * Copyright (C) 2013 Stefan Kristiansson, stefan.kristiansson@...nalahti.fi
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/string.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/mm.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/fb.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +
> +/* OCFB register defines */
> +#define OCFB_CTRL	0x000
> +#define OCFB_STAT	0x004
> +#define OCFB_HTIM	0x008
> +#define OCFB_VTIM	0x00c
> +#define OCFB_HVLEN	0x010
> +#define OCFB_VBARA	0x014
> +#define OCFB_PALETTE	0x800
> +
> +#define OCFB_CTRL_VEN	0x00000001 /* Video Enable */
> +#define OCFB_CTRL_HIE	0x00000002 /* HSync Interrupt Enable */
> +#define OCFB_CTRL_PC	0x00000800 /* 8-bit Pseudo Color Enable*/
> +#define OCFB_CTRL_CD8	0x00000000 /* Color Depth 8 */
> +#define OCFB_CTRL_CD16	0x00000200 /* Color Depth 16 */
> +#define OCFB_CTRL_CD24	0x00000400 /* Color Depth 24 */
> +#define OCFB_CTRL_CD32	0x00000600 /* Color Depth 32 */
> +#define OCFB_CTRL_VBL1	0x00000000 /* Burst Length 1 */
> +#define OCFB_CTRL_VBL2	0x00000080 /* Burst Length 2 */
> +#define OCFB_CTRL_VBL4	0x00000100 /* Burst Length 4 */
> +#define OCFB_CTRL_VBL8	0x00000180 /* Burst Length 8 */
> +
> +#define PALETTE_SIZE	256
> +
> +#define OCFB_NAME	"OC VGA/LCD"
> +
> +static char *mode_option;
> +
> +static const struct fb_videomode default_mode = {
> +	/* 640x480 @ 60 Hz, 31.5 kHz hsync */
> +	NULL, 60, 640, 480, 39721, 40, 24, 32, 11, 96, 2,
> +	0, FB_VMODE_NONINTERLACED
> +};
> +
> +struct ocfb_dev {
> +	struct fb_info info;
> +	/* Physical and virtual addresses of control regs */
> +	phys_addr_t regs_phys;
> +	int regs_phys_size;
> +	void __iomem *regs;
> +	/* flag indicating whether the regs are little endian accessed */
> +	int little_endian;
> +	/* Physical and virtual addresses of framebuffer */
> +	phys_addr_t fb_phys;
> +	void __iomem *fb_virt;
> +	u32 pseudo_palette[PALETTE_SIZE];
> +};
> +
> +struct ocfb_par {
> +	void __iomem *pal_adr;
> +};
> +
> +static struct ocfb_par ocfb_par_priv;
> +
> +static struct fb_var_screeninfo ocfb_var;
> +static struct fb_fix_screeninfo ocfb_fix;
> +
> +#ifndef MODULE
> +static int __init ocfb_setup(char *options)
> +{
> +	char *curr_opt;
> +
> +	if (!options || !*options)
> +		return 0;
> +
> +	while ((curr_opt = strsep(&options, ",")) != NULL) {
> +		if (!*curr_opt)
> +			continue;
> +		mode_option = curr_opt;
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
> +static inline u32 ocfb_readreg(struct ocfb_dev *fbdev, loff_t offset)
> +{
> +	if (fbdev->little_endian)
> +		return ioread32(fbdev->regs + offset);
> +	else
> +		return ioread32be(fbdev->regs + offset);
> +}
> +
> +static void ocfb_writereg(struct ocfb_dev *fbdev, loff_t offset, u32 data)
> +{
> +	if (fbdev->little_endian)
> +		iowrite32(data, fbdev->regs + offset);
> +	else
> +		iowrite32be(data, fbdev->regs + offset);
> +}
> +
> +static int ocfb_setupfb(struct ocfb_dev *fbdev)
> +{
> +	unsigned long bpp_config;
> +	struct fb_var_screeninfo *var = &fbdev->info.var;
> +	struct device *dev = fbdev->info.device;
> +	u32 hlen;
> +	u32 vlen;
> +
> +	/* Disable display */
> +	ocfb_writereg(fbdev, OCFB_CTRL, 0);
> +
> +	/* Register framebuffer address */
> +	fbdev->little_endian = 0;
> +	ocfb_writereg(fbdev, OCFB_VBARA, fbdev->fb_phys);
> +
> +	/* Detect endianess */
> +	if (ocfb_readreg(fbdev, OCFB_VBARA) != fbdev->fb_phys) {
> +		fbdev->little_endian = 1;
> +		ocfb_writereg(fbdev, OCFB_VBARA, fbdev->fb_phys);
> +	}
> +
> +	/* Horizontal timings */
> +	ocfb_writereg(fbdev, OCFB_HTIM, (var->hsync_len - 1) << 24 |
> +		      (var->right_margin - 1) << 16 | (var->xres - 1));
> +
> +	/* Vertical timings */
> +	ocfb_writereg(fbdev, OCFB_VTIM, (var->vsync_len - 1) << 24 |
> +		      (var->lower_margin - 1) << 16 | (var->yres - 1));
> +
> +	/* Total length of frame */
> +	hlen = var->left_margin + var->right_margin + var->hsync_len +
> +		var->xres;
> +
> +	vlen = var->upper_margin + var->lower_margin + var->vsync_len +
> +		var->yres;
> +
> +	ocfb_writereg(fbdev, OCFB_HVLEN, (hlen - 1) << 16 | (vlen - 1));
> +
> +	bpp_config = OCFB_CTRL_CD8;
> +	switch (var->bits_per_pixel) {
> +	case 8:
> +		if (!var->grayscale)
> +			bpp_config |= OCFB_CTRL_PC;  /* enable palette */
> +		break;
> +
> +	case 16:
> +		bpp_config |= OCFB_CTRL_CD16;
> +		break;
> +
> +	case 24:
> +		bpp_config |= OCFB_CTRL_CD24;
> +		break;
> +
> +	case 32:
> +		bpp_config |= OCFB_CTRL_CD32;
> +		break;
> +
> +	default:
> +		dev_err(dev, "no bpp specified\n");
> +		break;
> +	}
> +
> +	/* maximum (8) VBL (video memory burst length) */
> +	bpp_config |= OCFB_CTRL_VBL8;
> +
> +	/* Enable output */
> +	ocfb_writereg(fbdev, OCFB_CTRL, (OCFB_CTRL_VEN | bpp_config));
> +
> +	return 0;
> +}
> +
> +static int ocfb_setcolreg(unsigned regno, unsigned red, unsigned green,
> +			  unsigned blue, unsigned transp,
> +			  struct fb_info *info)
> +{
> +	struct ocfb_par *par = (struct ocfb_par *)info->par;
> +	u32 color;
> +
> +	if (regno >= info->cmap.len) {
> +		dev_err(info->device, "regno >= cmap.len\n");
> +		return 1;
> +	}
> +
> +	if (info->var.grayscale) {
> +		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
> +		red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
> +	}
> +
> +	red >>= (16 - info->var.red.length);
> +	green >>= (16 - info->var.green.length);
> +	blue >>= (16 - info->var.blue.length);
> +	transp >>= (16 - info->var.transp.length);
> +
> +	if (info->var.bits_per_pixel == 8 && !info->var.grayscale) {
> +		regno <<= 2;
> +		color = (red << 16) | (green << 8) | blue;
> +		ocfb_writereg(par->pal_adr, regno, color);
> +	} else {
> +		((u32 *)(info->pseudo_palette))[regno] =
> +			(red << info->var.red.offset) |
> +			(green << info->var.green.offset) |
> +			(blue << info->var.blue.offset) |
> +			(transp << info->var.transp.offset);
> +	}
> +
> +	return 0;
> +}
> +
> +static int ocfb_init_fix(struct ocfb_dev *fbdev)
> +{
> +	struct fb_var_screeninfo *var = &fbdev->info.var;
> +	struct fb_fix_screeninfo *fix = &fbdev->info.fix;
> +
> +	strcpy(fix->id, OCFB_NAME);
> +
> +	fix->line_length = var->xres * var->bits_per_pixel/8;
> +	fix->smem_len = fix->line_length * var->yres;
> +	fix->type = FB_TYPE_PACKED_PIXELS;
> +
> +	if (var->bits_per_pixel == 8 && !var->grayscale)
> +		fix->visual = FB_VISUAL_PSEUDOCOLOR;
> +	else
> +		fix->visual = FB_VISUAL_TRUECOLOR;
> +
> +	return 0;
> +}
> +
> +static int ocfb_init_var(struct ocfb_dev *fbdev)
> +{
> +	struct fb_var_screeninfo *var = &fbdev->info.var;
> +
> +	var->accel_flags = FB_ACCEL_NONE;
> +	var->activate = FB_ACTIVATE_NOW;
> +	var->xres_virtual = var->xres;
> +	var->yres_virtual = var->yres;
> +
> +	switch (var->bits_per_pixel) {
> +	case 8:
> +		var->transp.offset = 0;
> +		var->transp.length = 0;
> +		var->red.offset = 0;
> +		var->red.length = 8;
> +		var->green.offset = 0;
> +		var->green.length = 8;
> +		var->blue.offset = 0;
> +		var->blue.length = 8;
> +		break;
> +
> +	case 16:
> +		var->transp.offset = 0;
> +		var->transp.length = 0;
> +		var->red.offset = 11;
> +		var->red.length = 5;
> +		var->green.offset = 5;
> +		var->green.length = 6;
> +		var->blue.offset = 0;
> +		var->blue.length  = 5;
> +		break;
> +
> +	case 24:
> +		var->transp.offset = 0;
> +		var->transp.length = 0;
> +		var->red.offset = 16;
> +		var->red.length = 8;
> +		var->green.offset = 8;
> +		var->green.length = 8;
> +		var->blue.offset = 0;
> +		var->blue.length = 8;
> +		break;
> +
> +	case 32:
> +		var->transp.offset = 24;
> +		var->transp.length = 8;
> +		var->red.offset = 16;
> +		var->red.length = 8;
> +		var->green.offset = 8;
> +		var->green.length = 8;
> +		var->blue.offset = 0;
> +		var->blue.length = 8;
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static struct fb_ops ocfb_ops = {
> +	.owner		= THIS_MODULE,
> +	.fb_setcolreg	= ocfb_setcolreg,
> +	.fb_fillrect	= cfb_fillrect,
> +	.fb_copyarea	= cfb_copyarea,
> +	.fb_imageblit	= cfb_imageblit,
> +};
> +
> +static int ocfb_probe(struct platform_device *pdev)
> +{
> +	int ret = 0;
> +	struct ocfb_dev *fbdev;
> +	struct ocfb_par *par = &ocfb_par_priv;
> +	struct resource *res;
> +	struct resource *mmio;
> +	int fbsize;
> +
> +	fbdev = devm_kzalloc(&pdev->dev, sizeof(*fbdev), GFP_KERNEL);
> +	if (!fbdev)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, fbdev);
> +
> +	fbdev->info.fbops = &ocfb_ops;
> +	fbdev->info.var = ocfb_var;
> +	fbdev->info.fix = ocfb_fix;
> +	fbdev->info.device = &pdev->dev;
> +	fbdev->info.par = par;
> +
> +	/* Video mode setup */
> +	if (!fb_find_mode(&fbdev->info.var, &fbdev->info, mode_option,
> +			  NULL, 0, &default_mode, 16)) {
> +		dev_err(&pdev->dev, "No valid video modes found\n");
> +		return -EINVAL;
> +	}
> +	ocfb_init_var(fbdev);
> +	ocfb_init_fix(fbdev);
> +
> +	/* Request I/O resource */
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "I/O resource request failed\n");
> +		return -ENXIO;
> +	}
> +	fbdev->regs_phys = res->start;
> +	fbdev->regs_phys_size = resource_size(res);
> +	mmio = devm_request_mem_region(&pdev->dev, res->start,
> +				       resource_size(res), res->name);
> +	if (!mmio) {
> +		dev_err(&pdev->dev, "I/O memory space request failed\n");
> +		return -ENXIO;
> +	}
> +	fbdev->regs = devm_ioremap_nocache(&pdev->dev, mmio->start,
> +					   resource_size(mmio));
> +	if (!fbdev->regs) {
> +		dev_err(&pdev->dev, "I/O memory remap request failed\n");
> +		return -ENXIO;
> +	}
> +	par->pal_adr = fbdev->regs + OCFB_PALETTE;
> +
> +	/* Allocate framebuffer memory */
> +	fbsize = fbdev->info.fix.smem_len;
> +	fbdev->fb_virt = dma_alloc_coherent(&pdev->dev, PAGE_ALIGN(fbsize),
> +					    &fbdev->fb_phys, GFP_KERNEL);
> +	if (!fbdev->fb_virt) {
> +		dev_err(&pdev->dev,
> +			"Frame buffer memory allocation failed\n");
> +		ret = -ENOMEM;
> +		goto err_release;
> +	}
> +	fbdev->info.fix.smem_start = fbdev->fb_phys;
> +	fbdev->info.screen_base = (void __iomem *)fbdev->fb_virt;
> +	fbdev->info.pseudo_palette = fbdev->pseudo_palette;
> +
> +	/* Clear framebuffer */
> +	memset_io((void __iomem *)fbdev->fb_virt, 0, fbsize);
> +
> +	/* Setup and enable the framebuffer */
> +	ocfb_setupfb(fbdev);
> +
> +	if (fbdev->little_endian)
> +		fbdev->info.flags |= FBINFO_FOREIGN_ENDIAN;
> +
> +	/* Allocate color map */
> +	ret = fb_alloc_cmap(&fbdev->info.cmap, PALETTE_SIZE, 0);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Color map allocation failed\n");
> +		goto err_dma_free;
> +	}
> +
> +	/* Register framebuffer */
> +	ret = register_framebuffer(&fbdev->info);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Framebuffer registration failed\n");
> +		goto err_dealloc_cmap;
> +	}
> +
> +	return 0;
> +
> +err_dealloc_cmap:
> +	fb_dealloc_cmap(&fbdev->info.cmap);
> +
> +err_dma_free:
> +	dma_free_coherent(&pdev->dev, PAGE_ALIGN(fbsize), fbdev->fb_virt,
> +			  fbdev->fb_phys);
> +err_release:
> +	release_mem_region(fbdev->regs_phys, fbdev->regs_phys_size);
> +
> +	return ret;
> +}
> +
> +static int ocfb_remove(struct platform_device *pdev)
> +{
> +	struct ocfb_dev *fbdev = platform_get_drvdata(pdev);
> +
> +	unregister_framebuffer(&fbdev->info);
> +	fb_dealloc_cmap(&fbdev->info.cmap);
> +	dma_free_coherent(&pdev->dev, PAGE_ALIGN(fbdev->info.fix.smem_len),
> +			  fbdev->fb_virt, fbdev->fb_phys);
> +
> +	/* Disable display */
> +	ocfb_writereg(fbdev, OCFB_CTRL, 0);
> +
> +	release_mem_region(fbdev->regs_phys, fbdev->regs_phys_size);
> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +
> +static struct of_device_id ocfb_match[] = {
> +	{ .compatible = "opencores,ocfb", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ocfb_match);
> +
> +static struct platform_driver ocfb_driver = {
> +	.probe  = ocfb_probe,
> +	.remove	= ocfb_remove,
> +	.driver = {
> +		.name = "ocfb_fb",
> +		.of_match_table = ocfb_match,
> +	}
> +};
> +
> +/*
> + * Init and exit routines
> + */
> +static int __init ocfb_init(void)
> +{
> +#ifndef MODULE
> +	char *option = NULL;
> +
> +	if (fb_get_options("ocfb", &option))
> +		return -ENODEV;
> +	ocfb_setup(option);
> +#endif
> +	return platform_driver_register(&ocfb_driver);
> +}
> +
> +static void __exit ocfb_exit(void)
> +{
> +	platform_driver_unregister(&ocfb_driver);
> +}
> +
> +module_init(ocfb_init);
> +module_exit(ocfb_exit);
> +
> +MODULE_AUTHOR("Stefan Kristiansson <stefan.kristiansson@...nalahti.fi>");
> +MODULE_DESCRIPTION("OpenCores VGA/LCD 2.0 frame buffer driver");
> +MODULE_LICENSE("GPL v2");
> +module_param(mode_option, charp, 0);
> +MODULE_PARM_DESC(mode_option, "Video mode ('<xres>x<yres>[-<bpp>][@refresh]')");
> -- 
> 1.8.3.2
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists