linux-kernel - [PATCH v3 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1385403367-18144-7-git-send-email-matt.porter@linaro.org>
Date:	Mon, 25 Nov 2013 13:16:04 -0500
From:	Matt Porter <matt.porter@...aro.org>
To:	Felipe Balbi <balbi@...com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Kishon Vijay Abraham I <kishon@...com>,
	Rob Herring <rob.herring@...xeda.com>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Kumar Gala <galak@...eaurora.org>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Christian Daudt <bcm@...thebug.org>,
	Paul Zimmerman <paulz@...opsys.com>
Cc:	Tomasz Figa <t.figa@...sung.com>,
	Kamil Debski <k.debski@...sung.com>,
	Kyungmin Park <kyungmin.park@...sung.com>,
	Linux USB List <linux-usb@...r.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Devicetree List <devicetree@...r.kernel.org>,
	Linaro Patches <patches@...aro.org>
Subject: [PATCH v3 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem

Adds support for querying the phy bus width from the generic phy
subsystem. Configure UTMI bus width in GUSBCFG based on this value.

Signed-off-by: Matt Porter <matt.porter@...aro.org>
---
 drivers/usb/gadget/s3c-hsotg.c | 14 +++++++++++++-
 drivers/usb/gadget/s3c-hsotg.h |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8dfe33f..be41585 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -144,6 +144,7 @@ struct s3c_hsotg_ep {
  * @regs: The memory area mapped for accessing registers.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
  * @num_of_eps: Number of available EPs (excluding EP0)
  * @debug_root: root directrory for debugfs.
@@ -171,6 +172,7 @@ struct s3c_hsotg {
 
 	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
 
+	u32			phyif;
 	unsigned int		dedicated_fifos:1;
 	unsigned char           num_of_eps;
 
@@ -2276,7 +2278,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
 	 */
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
-	writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) |
+	writel(hsotg->phyif | GUSBCFG_TOutCal(7) |
 	       (0x5 << 10), hsotg->regs + GUSBCFG);
 
 	s3c_hsotg_init_fifo(hsotg);
@@ -3622,6 +3624,16 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_supplies;
 	}
 
+	/* Set default UTMI width */
+	hsotg->phyif = GUSBCFG_PHYIf16;
+
+	/*
+	 * If using the generic PHY framework, check if the PHY bus
+	 * width is 8-bit and set the phyif appropriately.
+	 */
+	if (hsotg->phy && (phy_get_bus_width(phy) == 8))
+		hsotg->phyif = GUSBCFG_PHYIf8;
+
 	if (hsotg->phy)
 		phy_init(hsotg->phy);
 
diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h
index d650b12..85f549f 100644
--- a/drivers/usb/gadget/s3c-hsotg.h
+++ b/drivers/usb/gadget/s3c-hsotg.h
@@ -55,6 +55,7 @@
 #define GUSBCFG_HNPCap				(1 << 9)
 #define GUSBCFG_SRPCap				(1 << 8)
 #define GUSBCFG_PHYIf16			(1 << 3)
+#define GUSBCFG_PHYIf8				(0 << 3)
 #define GUSBCFG_TOutCal_MASK			(0x7 << 0)
 #define GUSBCFG_TOutCal_SHIFT			(0)
 #define GUSBCFG_TOutCal_LIMIT			(0x7)
-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/