[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <529475B2.9070202@ti.com>
Date: Tue, 26 Nov 2013 15:49:30 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Matt Porter <matt.porter@...aro.org>, Felipe Balbi <balbi@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Christian Daudt <bcm@...thebug.org>,
Paul Zimmerman <paulz@...opsys.com>
CC: Tomasz Figa <t.figa@...sung.com>,
Kamil Debski <k.debski@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Linux USB List <linux-usb@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Devicetree List <devicetree@...r.kernel.org>,
Linaro Patches <patches@...aro.org>
Subject: Re: [PATCH v3 2/9] staging: dwc2: update DT binding to add generic
clock/phy properties
On Monday 25 November 2013 11:46 PM, Matt Porter wrote:
> dwc2/s3c-hsotg require a single clock to be specified and optionally
> a generic phy. On the s3c-hsotg driver old style USB phy support is
> present as a fallback so the generic phy properties are optional.
>
> Signed-off-by: Matt Porter <matt.porter@...aro.org>
> ---
> Documentation/devicetree/bindings/staging/dwc2.txt | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
> index 1a1b7cf..b8b42b6 100644
> --- a/Documentation/devicetree/bindings/staging/dwc2.txt
> +++ b/Documentation/devicetree/bindings/staging/dwc2.txt
> @@ -5,6 +5,12 @@ Required properties:
> - compatible : "snps,dwc2"
> - reg : Should contain 1 register range (address and length)
> - interrupts : Should contain 1 interrupt
> +- clocks: clock provider specifier
> +- clock-names: shall be "otg"
> +- phys: phy provider specifier
> +- phy-names: shall be "device"
lets mention in the Documentation too that the phy properties are optional.
apart from that..
Acked-by: Kishon Vijay Abraham I <kishon@...com>
> +Refer to clk/clock-bindings.txt for generic clock consumer properties
> +Refer to phy/phy-bindings.txt for generic phy consumer properties
>
> Example:
>
> @@ -12,4 +18,8 @@ Example:
> compatible = "ralink,rt3050-usb, snps,dwc2";
> reg = <0x101c0000 40000>;
> interrupts = <18>;
> + clocks = <&usb_otg_ahb_clk>;
> + clock-names = "otg";
> + phys = <&usbphy>;
> + phy-names = "device";
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists