| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1385727565-25794-9-git-send-email-lee.jones@linaro.org>
Date: Fri, 29 Nov 2013 12:18:57 +0000
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
dwmw2@...radead.org
Cc: linus.walleij@...aro.org, linux-mtd@...ts.infradead.org,
angus.clark@...com, Lee Jones <lee.jones@...aro.org>
Subject: [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands
JEDEC have helped to standardise a great deal of the commands which
can be issued to a Serial Flash devices. Many of the OPCODEs and all
of the Serial Flash Discoverable Parameters (SFDP) commands are
generic across devices. This patch provides a shared point where
these commands can be defined.
Suggested-by: Mark Brown <broonie@...nel.org>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
drivers/mtd/devices/serial_flash_cmds.h | 91 +++++++++++++++++++++++++++++++++
drivers/mtd/devices/st_spi_fsm.c | 1 +
drivers/mtd/devices/st_spi_fsm.h | 2 +
3 files changed, 94 insertions(+)
create mode 100644 drivers/mtd/devices/serial_flash_cmds.h
diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h
new file mode 100644
index 0000000..62aa420
--- /dev/null
+++ b/drivers/mtd/devices/serial_flash_cmds.h
@@ -0,0 +1,91 @@
+/*
+ * Generic/SFDP Flash Commands and Device Capabilities
+ *
+ * Copyright (C) 2013 Lee Jones <lee.jones@...nro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _MTD_SERIAL_FLASH_CMDS_H
+#define _MTD_SERIAL_FLASH_CMDS_H
+
+/* Generic Flash Commands/OPCODEs */
+#define FLASH_CMD_WREN 0x06
+#define FLASH_CMD_WRDI 0x04
+#define FLASH_CMD_RDID 0x9f
+#define FLASH_CMD_RDSR 0x05
+#define FLASH_CMD_RDSR2 0x35
+#define FLASH_CMD_WRSR 0x01
+#define FLASH_CMD_SE_4K 0x20
+#define FLASH_CMD_SE_32K 0x52
+#define FLASH_CMD_SE 0xd8
+#define FLASH_CMD_CHIPERASE 0xc7
+#define FLASH_CMD_WRVCR 0x81
+#define FLASH_CMD_RDVCR 0x85
+
+/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
+#define FLASH_CMD_READ 0x03 /* READ */
+#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */
+#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
+#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */
+#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
+#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */
+
+#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */
+#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
+#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
+
+#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
+#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
+
+/* READ commands with 32-bit addressing */
+#define FLASH_CMD_READ4 0x13
+#define FLASH_CMD_READ4_FAST 0x0c
+#define FLASH_CMD_READ4_1_1_2 0x3c
+#define FLASH_CMD_READ4_1_2_2 0xbc
+#define FLASH_CMD_READ4_1_1_4 0x6c
+#define FLASH_CMD_READ4_1_4_4 0xec
+
+/* Configuration flags */
+#define FLASH_FLAG_SINGLE 0x000000ff
+#define FLASH_FLAG_READ_WRITE 0x00000001
+#define FLASH_FLAG_READ_FAST 0x00000002
+#define FLASH_FLAG_SE_4K 0x00000004
+#define FLASH_FLAG_SE_32K 0x00000008
+#define FLASH_FLAG_CE 0x00000010
+#define FLASH_FLAG_32BIT_ADDR 0x00000020
+#define FLASH_FLAG_RESET 0x00000040
+#define FLASH_FLAG_DYB_LOCKING 0x00000080
+
+#define FLASH_FLAG_DUAL 0x0000ff00
+#define FLASH_FLAG_READ_1_1_2 0x00000100
+#define FLASH_FLAG_READ_1_2_2 0x00000200
+#define FLASH_FLAG_READ_2_2_2 0x00000400
+#define FLASH_FLAG_WRITE_1_1_2 0x00001000
+#define FLASH_FLAG_WRITE_1_2_2 0x00002000
+#define FLASH_FLAG_WRITE_2_2_2 0x00004000
+
+#define FLASH_FLAG_QUAD 0x00ff0000
+#define FLASH_FLAG_READ_1_1_4 0x00010000
+#define FLASH_FLAG_READ_1_4_4 0x00020000
+#define FLASH_FLAG_READ_4_4_4 0x00040000
+#define FLASH_FLAG_WRITE_1_1_4 0x00100000
+#define FLASH_FLAG_WRITE_1_4_4 0x00200000
+#define FLASH_FLAG_WRITE_4_4_4 0x00400000
+
+#endif /* _MTD_SERIAL_FLASH_CMDS_H */
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index fe19ec3..71b6188 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -24,6 +24,7 @@
#include <asm/io.h>
#include "st_spi_fsm.h"
+#include "serial_flash_cmds.h"
static struct stfsm_seq stfsm_seq_read_jedec = {
.data_size = TRANSFER_SIZE(8),
diff --git a/drivers/mtd/devices/st_spi_fsm.h b/drivers/mtd/devices/st_spi_fsm.h
index 97b4868..5c6c55e 100644
--- a/drivers/mtd/devices/st_spi_fsm.h
+++ b/drivers/mtd/devices/st_spi_fsm.h
@@ -16,6 +16,8 @@
#ifndef ST_SPI_FSM_H
#define ST_SPI_FSM_H
+#include "serial_flash_cmds.h"
+
/*
* FSM SPI Controller Registers
*/
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists