| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 29 Nov 2013 09:45:26 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: rjw@...ysocki.net
Cc: linaro-kernel@...ts.linaro.org, patches@...aro.org,
cpufreq@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, nm@...com, ceh@...com,
Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH V3 1/2] cpufreq: Make sure CPU is running on a freq from freq-table
Sometimes boot loaders set CPU frequency to a value outside of frequency table
present with cpufreq core. In such cases CPU might be unstable if it has to run
on that frequency for long duration of time and so its better to set it to a
frequency which is specified in freq-table. This also makes cpufreq stats
inconsistent as cpufreq-stats would fail to register because current frequency
of CPU isn't found in freq-table.
Because we don't want this change to effect boot process badly, we go for the
next freq which is >= policy->cur ('cur' must be set by now, otherwise we will
end up setting freq to lowest of the table as 'cur' is initialized to zero).
In case current frequency doesn't match any frequency from freq-table, we throw
warnings to user, so that user can get this fixed in their bootloaders or
freq-tables.
On some systems we can't really say what frequency we're running at the moment
and so for these we have added another flag: CPUFREQ_SKIP_INITIAL_FREQ_CHECK.
Reported-by: Carlos Hernandez <ceh@...com>
Reported-and-tested-by: Nishanth Menon <nm@...com>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
V2->V3:
- Minor cleanups suggested by Rafael
- New patch: 2/2 (cpufreq: Mark x86 drivers with CPUFREQ_SKIP_INITIAL_FREQ_CHECK
flag)
- Rebased on PM/bleeding-edge
drivers/cpufreq/cpufreq.c | 40 ++++++++++++++++++++++++++++++++++++++++
drivers/cpufreq/freq_table.c | 22 ++++++++++++++++++++++
include/linux/cpufreq.h | 11 +++++++++++
3 files changed, 73 insertions(+)
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 606224a..f13320a 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1042,6 +1042,46 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
}
}
+ /*
+ * Sometimes boot loaders set CPU frequency to a value outside of
+ * frequency table present with cpufreq core. In such cases CPU might be
+ * unstable if it has to run on that frequency for long duration of time
+ * and so its better to set it to a frequency which is specified in
+ * freq-table. This also makes cpufreq stats inconsistent as
+ * cpufreq-stats would fail to register because current frequency of CPU
+ * isn't found in freq-table.
+ *
+ * Because we don't want this change to effect boot process badly, we go
+ * for the next freq which is >= policy->cur ('cur' must be set by now,
+ * otherwise we will end up setting freq to lowest of the table as 'cur'
+ * is initialized to zero).
+ *
+ * We are passing target-freq as "policy->cur - 1" otherwise
+ * __cpufreq_driver_target() would simply fail, as policy->cur will be
+ * equal to target-freq.
+ */
+ if (!(cpufreq_driver->flags & CPUFREQ_SKIP_INITIAL_FREQ_CHECK)
+ && has_target()) {
+ /* Are we running at unknown frequency ? */
+ ret = cpufreq_frequency_table_get_index(policy, policy->cur);
+ if (ret == -EINVAL) {
+ /* Warn user and fix it */
+ pr_warn("%s: CPU%d: Running at unlisted freq: %u KHz\n",
+ __func__, policy->cpu, policy->cur);
+ ret = __cpufreq_driver_target(policy, policy->cur - 1,
+ CPUFREQ_RELATION_L);
+
+ /*
+ * Reaching here after boot in a few seconds may not
+ * mean that system will remain stable at "unknown"
+ * frequency for longer duration. Hence, a BUG_ON().
+ */
+ BUG_ON(ret);
+ pr_warn("%s: CPU%d: Unlisted initial frequency changed to: %u KHz\n",
+ __func__, policy->cpu, policy->cur);
+ }
+ }
+
/* related cpus should atleast have policy->cpus */
cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus);
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 3458d27..a8ac042 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -178,7 +178,29 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
}
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_target);
+int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
+ unsigned int freq)
+{
+ struct cpufreq_frequency_table *table;
+ int i;
+
+ table = cpufreq_frequency_get_table(policy->cpu);
+ if (unlikely(!table)) {
+ pr_debug("%s: Unable to find frequency table\n", __func__);
+ return -ENOENT;
+ }
+
+ for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ if (table[i].frequency == freq)
+ return i;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_index);
+
static DEFINE_PER_CPU(struct cpufreq_frequency_table *, cpufreq_show_table);
+
/**
* show_available_freqs - show available frequencies for the specified CPU
*/
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index ee5fe9d..03174ab 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -252,6 +252,15 @@ struct cpufreq_driver {
*/
#define CPUFREQ_ASYNC_NOTIFICATION (1 << 4)
+/*
+ * Set by drivers which don't want cpufreq core to check if CPU is running at a
+ * frequency present in freq-table exposed by the driver. For other drivers if
+ * CPU is found running at an out of table freq, we will try to set it to a freq
+ * from the table. And if that fails, we will stop further boot process by
+ * issuing a BUG_ON().
+ */
+#define CPUFREQ_SKIP_INITIAL_FREQ_CHECK (1 << 5)
+
int cpufreq_register_driver(struct cpufreq_driver *driver_data);
int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
@@ -447,6 +456,8 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation,
unsigned int *index);
+int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
+ unsigned int freq);
void cpufreq_frequency_table_update_policy_cpu(struct cpufreq_policy *policy);
ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf);
--
1.7.12.rc2.18.g61b472e
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists