linux-kernel - Re: [PATCH 2/3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 29 Nov 2013 12:40:55 +0800
From:	Chris Ruehl <chris.ruehl@...ys.com.hk>
To:	Peter Chen <Peter.Chen@...escale.com>
CC:	"alexander.shishkin@...ux.intel.com" 
	<alexander.shishkin@...ux.intel.com>,
	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/3] usb: chipidea: Fix Internal error: : 808 [#1] ARM
 related to STS flag

On Friday, November 29, 2013 11:27 AM, Peter Chen wrote:
>   
>> * init the sts flag to 0 (missed)
>> * set the sts flag only if not 0
>>
> does PORTSC_STS bit as 1 or 0 affect your case?
> If not, please remove hw_write(ci, OP_DEVLC, DEVLC_STS, sts),
> since it is useless at current code logic.
>
> Peter

Peter,

in the switch statement sts is set to 1 therefore I think its used.

        case USBPHY_INTERFACE_MODE_SERIAL:
                 portsc = PORTSC_PTS(PTS_SERIAL);
                 lpm = DEVLC_PTS(PTS_SERIAL);
                 sts = 1;
                 break;

Regards
Chris


>
>> Signed-off-by: Chris Ruehl <chris.ruehl@...ys.com.hk>
>> ---
>>   drivers/usb/chipidea/core.c |    8 ++++++--
>>   1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
>> index 5075407..1a6010e 100644
>> --- a/drivers/usb/chipidea/core.c
>> +++ b/drivers/usb/chipidea/core.c
>> @@ -245,6 +245,8 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
>>   {
>>   	u32 portsc, lpm, sts;
>>
>> +	sts = 0;
>> +
>>   	switch (ci->platdata->phy_mode) {
>>   	case USBPHY_INTERFACE_MODE_UTMI:
>>   		portsc = PORTSC_PTS(PTS_UTMI);
>> @@ -273,10 +275,12 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
>>
>>   	if (ci->hw_bank.lpm) {
>>   		hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
>> -		hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
>> +		if (sts)
>> +			hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
>>   	} else {
>>   		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
>> -		hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
>> +		if ( sts )
>> +			hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
>>   	}
>>   }
>>
>> --
>> 1.7.10.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/