| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1385815123-18232-1-git-send-email-standby24x7@gmail.com> Date: Sat, 30 Nov 2013 21:38:43 +0900 From: Masanari Iida <standby24x7@...il.com> To: linux-kernel@...r.kernel.org, rdunlap@...radead.org Cc: trivial@...nel.org, Masanari Iida <standby24x7@...il.com> Subject: [PATCH/V2] [trivial] treewide: Fix typo in Kconfig Correct spelling typo in Kconfig. Signed-off-by: Masanari Iida <standby24x7@...il.com> --- arch/arm/mach-at91/Kconfig.non_dt | 2 +- arch/x86/Kconfig | 2 +- arch/xtensa/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/isdn/mISDN/Kconfig | 2 +- drivers/scsi/Kconfig | 4 ++-- drivers/xen/Kconfig | 2 +- net/netfilter/ipset/Kconfig | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index ca900be..0363dba 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -241,7 +241,7 @@ config MACH_PCONTROL_G20 bool "PControl G20 CPU module" help Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, beeing the decentralized unit of a building automation + carrier board, being the decentralized unit of a building automation system; featuring nvram, eth-switch, iso-rs485, display, io config MACH_GSIA18S diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a5c83b9..6bdaa0f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -952,7 +952,7 @@ config X86_ANCIENT_MCE depends on X86_32 && X86_MCE ---help--- Include support for machine check handling on old Pentium 5 or WinChip - systems. These typically need to be enabled explicitely on the command + systems. These typically need to be enabled explicitly on the command line. config X86_MCE_THRESHOLD diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 70a160b..49c0bd0 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -117,7 +117,7 @@ config HAVE_SMP the CPU core definition and currently needs to be selected manually. Multiprocessor support in implemented with external cache and - interrupt controlers. + interrupt controllers. The MX interrupt distributer adds Interprocessor Interrupts and causes the IRQ numbers to be increased by 4 for devices diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3b26129..8531b1d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -354,7 +354,7 @@ config I2C_BCM_KONA If you say yes to this option, support will be included for the I2C interface on the Broadcom Kona family of processors. - If you do not need KONA I2C inteface, say N. + If you do not need KONA I2C interface, say N. config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig index 1747a02..c0730d5 100644 --- a/drivers/isdn/mISDN/Kconfig +++ b/drivers/isdn/mISDN/Kconfig @@ -17,7 +17,7 @@ config MISDN_DSP This module may be used for special applications that require cross connecting of bchannels, conferencing, dtmf decoding, - echo cancelation, tone generation, and Blowfish encryption and + echo cancellation, tone generation, and Blowfish encryption and decryption. It may use hardware features if available. E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index fe25677..a2d61d0 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -204,9 +204,9 @@ config SCSI_MULTI_LUN Some devices support more than one LUN (Logical Unit Number) in order to allow access to several media, e.g. CD jukebox, USB card reader, mobile phone in mass storage mode. This option forces the kernel to - probe for all LUNs by default. This setting can be overriden by + probe for all LUNs by default. This setting can be overridden by max_luns boot/module parameter. Note that this option does not affect - devices conforming to SCSI-3 or higher as they can explicitely report + devices conforming to SCSI-3 or higher as they can explicitly report their number of LUNs. It is safe to say Y here unless you have one of those rare devices which reacts in an unexpected way when probed for multiple LUNs. diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index c794ea1..12ba6db 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -222,7 +222,7 @@ config XEN_ACPI_PROCESSOR To do that the driver parses the Power Management data and uploads said information to the Xen hypervisor. Then the Xen hypervisor can - select the proper Cx and Pxx states. It also registers itslef as the + select the proper Cx and Pxx states. It also registers itself as the SMM so that other drivers (such as ACPI cpufreq scaling driver) will not load. diff --git a/net/netfilter/ipset/Kconfig b/net/netfilter/ipset/Kconfig index a2d6263..44cd4f5 100644 --- a/net/netfilter/ipset/Kconfig +++ b/net/netfilter/ipset/Kconfig @@ -21,7 +21,7 @@ config IP_SET_MAX You can define here default value of the maximum number of IP sets for the kernel. - The value can be overriden by the 'max_sets' module + The value can be overridden by the 'max_sets' module parameter of the 'ip_set' module. config IP_SET_BITMAP_IP -- 1.8.5.rc1.28.g7061504 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists