linux-kernel - [PATCH v2 3/3] ARM: tegra: correct Colibri T20 regulator settings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <45a6c86d41a3373e0ca72cc78cafa92732b883b3.1385913228.git.stefan@agner.ch>
Date:	Sun,  1 Dec 2013 16:59:15 +0100
From:	Stefan Agner <stefan@...er.ch>
To:	swarren@...dotorg.org, thierry.reding@...il.com, dev@...xeye.de,
	lee.jones@...aro.org, lgirdwood@...il.com, broonie@...nel.org
Cc:	kai.poggensee@...onic-design.de, sameo@...ux.intel.com,
	linux-tegra@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org, Stefan Agner <stefan@...er.ch>
Subject: [PATCH v2 3/3] ARM: tegra: correct Colibri T20 regulator settings

Set the parent of the regulators LDO2 to LDO9 according to the
schematic. Set the base voltage to 3.3V, there is only 3.3V on the
module itself.

Set the Core and CPU voltage to the specified voltages of 1.2V and
1.0V respectivly.

LDO6 should deliver 2.85V. The attached peripherals were not in
use so far.

Signed-off-by: Stefan Agner <stefan@...er.ch>
---
 arch/arm/boot/dts/tegra20-colibri-512.dtsi | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index cbe89ff..51e0880 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -225,15 +225,15 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 
-			sys-supply = <&vdd_5v0_reg>;
+			sys-supply = <&vdd_3v3_reg>;
 			vin-sm0-supply = <&sys_reg>;
 			vin-sm1-supply = <&sys_reg>;
 			vin-sm2-supply = <&sys_reg>;
 			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
+			vinldo23-supply = <&vdd_3v3_reg>;
+			vinldo4-supply = <&vdd_3v3_reg>;
+			vinldo678-supply = <&vdd_3v3_reg>;
+			vinldo9-supply = <&vdd_3v3_reg>;
 
 			regulators {
 				#address-cells = <1>;
@@ -250,8 +250,8 @@
 					reg = <1>;
 					regulator-compatible = "sm0";
 					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1275000>;
-					regulator-max-microvolt = <1275000>;
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
@@ -259,8 +259,8 @@
 					reg = <2>;
 					regulator-compatible = "sm1";
 					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
@@ -316,8 +316,8 @@
 					reg = <10>;
 					regulator-compatible = "ldo6";
 					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
 				};
 
 				hdmi_vdd_reg: regulator@11 {
@@ -504,12 +504,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		vdd_5v0_reg: regulator@100 {
+		vdd_3v3_reg: regulator@100 {
 			compatible = "regulator-fixed";
 			reg = <100>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+			regulator-name = "vdd_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/