| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1386079702-22821-1-git-send-email-linus.walleij@linaro.org>
Date: Tue, 3 Dec 2013 15:08:22 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Liam Girdwood <lrg@...mlogic.co.uk>,
Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Mark Brown <mark.brown@...aro.org>,
Lee Jones <lee.jones@...aro.org>
Subject: [PATCH] regulator: ab8500: delete non-devicetree probe path
The Ux500 platform has been converted to do device-tree only
boots, no longer supports platform data passing, so this
probe path is unused. Delete it, simplifying the driver a
whole lot.
Cc: Mark Brown <mark.brown@...aro.org>
Cc: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
I tried to also delete this boot path for the external regulators
in ab8500-ext.c, but it seems to not have been cleanly converted
to device tree yet, making it dependent on passing some platform
data still. Thus I cannot go down the path and delete all platform
data down to the point where (most of)
arch/arm/mach-ux500/board-mop500-regulator.[c|h] gets deleted,
but I can do this much.
---
drivers/regulator/ab8500.c | 102 ++++-----------------------------------------
1 file changed, 8 insertions(+), 94 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 603f192e84f1..0f86695b737a 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -2998,37 +2998,6 @@ static void abx500_get_regulator_info(struct ab8500 *ab8500)
}
}
-static int ab8500_regulator_init_registers(struct platform_device *pdev,
- int id, int mask, int value)
-{
- struct ab8500_reg_init *reg_init = abx500_regulator.init;
- int err;
-
- BUG_ON(value & ~mask);
- BUG_ON(mask & ~reg_init[id].mask);
-
- /* initialize register */
- err = abx500_mask_and_set_register_interruptible(
- &pdev->dev,
- reg_init[id].bank,
- reg_init[id].addr,
- mask, value);
- if (err < 0) {
- dev_err(&pdev->dev,
- "Failed to initialize 0x%02x, 0x%02x.\n",
- reg_init[id].bank,
- reg_init[id].addr);
- return err;
- }
- dev_vdbg(&pdev->dev,
- " init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
- reg_init[id].bank,
- reg_init[id].addr,
- mask, value);
-
- return 0;
-}
-
static int ab8500_regulator_register(struct platform_device *pdev,
struct regulator_init_data *init_data,
int id, struct device_node *np)
@@ -3095,9 +3064,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
- struct ab8500_platform_data *ppdata;
- struct ab8500_regulator_platform_data *pdata;
- int i, err;
+ int err;
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
@@ -3106,68 +3073,15 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
abx500_get_regulator_info(ab8500);
- if (np) {
- err = of_regulator_match(&pdev->dev, np,
- abx500_regulator.match,
- abx500_regulator.match_size);
- if (err < 0) {
- dev_err(&pdev->dev,
- "Error parsing regulator init data: %d\n", err);
- return err;
- }
-
- err = ab8500_regulator_of_probe(pdev, np);
- return err;
- }
-
- ppdata = dev_get_platdata(ab8500->dev);
- if (!ppdata) {
- dev_err(&pdev->dev, "null parent pdata\n");
- return -EINVAL;
- }
-
- pdata = ppdata->regulator;
- if (!pdata) {
- dev_err(&pdev->dev, "null pdata\n");
- return -EINVAL;
- }
-
- /* make sure the platform data has the correct size */
- if (pdata->num_regulator != abx500_regulator.info_size) {
- dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
- return -EINVAL;
- }
-
- /* initialize debug (initial state is recorded with this call) */
- err = ab8500_regulator_debug_init(pdev);
- if (err)
+ err = of_regulator_match(&pdev->dev, np,
+ abx500_regulator.match,
+ abx500_regulator.match_size);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "Error parsing regulator init data: %d\n", err);
return err;
-
- /* initialize registers */
- for (i = 0; i < pdata->num_reg_init; i++) {
- int id, mask, value;
-
- id = pdata->reg_init[i].id;
- mask = pdata->reg_init[i].mask;
- value = pdata->reg_init[i].value;
-
- /* check for configuration errors */
- BUG_ON(id >= abx500_regulator.init_size);
-
- err = ab8500_regulator_init_registers(pdev, id, mask, value);
- if (err < 0)
- return err;
- }
-
- /* register all regulators */
- for (i = 0; i < abx500_regulator.info_size; i++) {
- err = ab8500_regulator_register(pdev, &pdata->regulator[i],
- i, NULL);
- if (err < 0)
- return err;
}
-
- return 0;
+ return ab8500_regulator_of_probe(pdev, np);
}
static int ab8500_regulator_remove(struct platform_device *pdev)
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists