linux-kernel - Re: [PATCH v3 3/4] pwm: add LP3943 PWM driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <529E68CC.4090808@ti.com>
Date:	Wed, 4 Dec 2013 08:27:08 +0900
From:	Milo Kim <milo.kim@...com>
To:	Thierry Reding <thierry.reding@...il.com>
CC:	<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-pwm@...r.kernel.org>, Lee Jones <lee.jones@...aro.org>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Linus Walleij <linus.walleij@...aro.org>
Subject: Re: [PATCH v3 3/4] pwm: add LP3943 PWM driver

Hi Thierry,

On 12/03/2013 07:24 PM, Thierry Reding wrote:
> On Thu, Sep 12, 2013 at 10:33:50AM +0900, Milo Kim wrote:
>> This is the other of the LP3943 MFD driver.
>> LP3943 can be used as a PWM generator, up to 2 channels.
>>
>> * Two PWM generators supported
>>
>> * Supported PWM operations
>>    request, free, config, enable and disable
>>
>> * Pin assignment
>>    A driver data, 'pin_used' is checked when a PWM is requested.
>>    If the output pin is already assigned, then returns as failure.
>>    If the pin is available, 'pin_used' is set.
>>    When the PWM is not used anymore, then it is cleared.
>>    It is defined as unsigned long type for atomic bit operation APIs,
>>    but only LSB 16bits are used because LP3943 has 16 outputs.
>>
>> Cc: Thierry Reding <thierry.reding@...il.com>
>> Signed-off-by: Milo Kim <milo.kim@...com>
>> ---
>> * Patch v3
>>    Manual polarity not supported any more.
>>    Add encapsulation functions for accessing internal data structure.
>>    Use pwm_set_chip_data() and pwm_get_chip_data().
>>    And other code fixes based on Thierry's feedback.
>>
>>   drivers/pwm/Kconfig      |   10 ++
>>   drivers/pwm/Makefile     |    1 +
>>   drivers/pwm/pwm-lp3943.c |  314 ++++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 325 insertions(+)
>>   create mode 100644 drivers/pwm/pwm-lp3943.c
>
> Hi Milo,
>
> Is this patchset still the latest version? I've tried to remember the
> status of this series, but I could only draw a blank.

Thanks a lot for this reminder.
I forgot to check the status.

The latest one is the v4, but LP3943 PWM driver code is same as v3.

   Update from v3 to v4:
     Move the driver description from the documentation to the MFD 
driver file.

There are two things to be ACKed for v4.
One is the PWM driver. (https://lkml.org/lkml/2013/9/25/11)
The other is the documentation. (https://lkml.org/lkml/2013/9/25/10)

Thanks,
   Milo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/