[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1386159055-10264-2-git-send-email-oliver@schinagl.nl>
Date: Wed, 4 Dec 2013 13:10:53 +0100
From: oliver@...inagl.nl
To: tj@...nel.org, grant.likely@...aro.org, ob.herring@...xeda.com,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, dev@...ux-sunxi.org
Cc: maxime.ripard@...e-electrons.com, ijc@...lion.org.uk,
hdegoede@...hat.com, oliver+list@...inagl.nl,
Oliver Schinagl <oliver@...inagl.nl>
Subject: [PATCH 1/3] RFC: AHCI: libahci is missing DMA
From: Oliver Schinagl <oliver@...inagl.nl>
The Allwinner sunxi platforms have patched in the following to enable
DMA. This patch enables DMA controllers for the SUNXI Architecture.
Signed-off-by: Olliver Schinagl <oliver@...inagl.nl>
---
drivers/ata/ahci.h | 6 ++++++
drivers/ata/libahci.c | 8 ++++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 2289efdf..2bf2423 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -138,6 +138,7 @@ enum {
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
PORT_FBS = 0x40, /* FIS-based Switching */
PORT_DEVSLP = 0x44, /* device sleep */
+ PORT_DMA = 0x70, /* direct memory access */
/* PORT_IRQ_{STAT,MASK} bits */
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
@@ -209,6 +210,11 @@ enum {
PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */
PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */
+ /* PORT_DMA bits */
+ PORT_DMA_SETUP_OFFSET = 8, /* dma setup offset */
+ PORT_DMA_SETUP_MASK = (0xff << PORT_DMA_SETUP_OFFSET),/* dma mask */
+ PORT_DMA_SETUP_INIT = (0x44 << 0),
+
/* hpriv->flags bits */
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index c482f8c..d697a74 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -570,6 +570,14 @@ void ahci_start_engine(struct ata_port *ap)
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
+#ifdef CONFIG_ARCH_SUNXI
+ /* Setup DMA before DMA start */
+ tmp = readl(port_mmio + PORT_DMA);
+ tmp &= ~PORT_DMA_SETUP_MASK;
+ tmp |= PORT_DMA_SETUP_INIT << PORT_DMA_SETUP_OFFSET;
+ writel(tmp, port_mmio + PORT_DMA);
+#endif
+
/* start DMA */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_START;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists