linux-kernel - Re: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e2fe1d7b546e9f81fdd1ad225676e76e@agner.ch>
Date:	Thu, 05 Dec 2013 18:33:20 +0100
From:	Stefan Agner <stefan@...er.ch>
To:	Stephen Warren <swarren@...dotorg.org>
Cc:	thierry.reding@...il.com, dev@...xeye.de, lee.jones@...aro.org,
	lgirdwood@...il.com, broonie@...nel.org,
	kai.poggensee@...onic-design.de, sameo@...ux.intel.com,
	linux-tegra@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings

Am 2013-12-05 18:12, schrieb Stephen Warren:
> On 12/03/2013 03:18 PM, Stefan Agner wrote:
>> Set the parent of the regulators LDO2 to LDO9 according to the
>> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
>> module itself.
>>
>> Set the Core and CPU voltage to the specified voltages of 1.2V and
>> 1.0V respectivly.
>>
>> LDO6 should deliver 2.85V. The attached peripherals were not in
>> use so far.
> 
> Does this depend on patch 1/3 or 2/3, or can I apply it to the Tegra
> tree which doesn't include those patches?

This patch is independent from 1/3 and 2/3, so you can apply it to the
Tegra tree. The relevant DT change for 2/3 is included in 2/3...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/