[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20131205190343.GI26766@atomide.com>
Date: Thu, 5 Dec 2013 11:03:43 -0800
From: Tony Lindgren <tony@...mide.com>
To: Nishanth Menon <nm@...com>
Cc: linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Tobias Jakobi <tjakobi@...h.uni-bielefeld.de>,
Joel F <joelf@...com>, Kevin Hilman <khilman@...aro.org>
Subject: Re: [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm
when bad data is detected
* Nishanth Menon <nm@...com> [131203 17:40]:
> Due to the cross dependencies between hwmod for automanaged device
> information for OMAP and dts node definitions, we can run into scenarios
> where the dts node is defined, however it's hwmod entry is yet to be
> added. In these cases:
> a) omap_device does not register a pm_domain (since it cannot find
> hwmod entry).
> b) driver does not know about (a), does a pm_runtime_get_sync which
> never fails
> c) It then tries to do some operation on the device (such as read the
> revision register (as part of probe) without clock or adequate OMAP
> generic PM operation performed for enabling the module.
>
> This causes a crash such as that reported in:
> https://bugzilla.kernel.org/show_bug.cgi?id=66441
>
> When 'ti,hwmod' is provided in dt node, it is expected that the device
> will not function without the OMAP's power automanagement. Hence, when
> we hit a fail condition (due to hwmod entries not present or other
> similar scenario), fail at pm_domain level due to lack of data, provide
> enough information for it to be fixed, however, it allows for the driver
> to take appropriate measures to prevent crash.
Kevin, any comments on this one?
Regards,
Tony
> Reported-by: Tobias Jakobi <tjakobi@...h.uni-bielefeld.de>
> Signed-off-by: Nishanth Menon <nm@...com>
> ---
> arch/arm/mach-omap2/omap_device.c | 24 ++++++++++++++++++++++++
> arch/arm/mach-omap2/omap_device.h | 1 +
> 2 files changed, 25 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
> index 53f0735..e0a398c 100644
> --- a/arch/arm/mach-omap2/omap_device.c
> +++ b/arch/arm/mach-omap2/omap_device.c
> @@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
> odbfd_exit1:
> kfree(hwmods);
> odbfd_exit:
> + /* if data/we are at fault.. load up a fail handler */
> + if (ret)
> + pdev->dev.pm_domain = &omap_device_fail_pm_domain;
> +
> return ret;
> }
>
> @@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev)
>
> return pm_generic_runtime_resume(dev);
> }
> +
> +static int _od_fail_runtime_suspend(struct device *dev)
> +{
> + dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
> + return -ENODEV;
> +}
> +
> +static int _od_fail_runtime_resume(struct device *dev)
> +{
> + dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
> + return -ENODEV;
> +}
> +
> #endif
>
> #ifdef CONFIG_SUSPEND
> @@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev)
> #define _od_resume_noirq NULL
> #endif
>
> +struct dev_pm_domain omap_device_fail_pm_domain = {
> + .ops = {
> + SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
> + _od_fail_runtime_resume, NULL)
> + }
> +};
> +
> struct dev_pm_domain omap_device_pm_domain = {
> .ops = {
> SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
> diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
> index 17ca1ae..78c02b3 100644
> --- a/arch/arm/mach-omap2/omap_device.h
> +++ b/arch/arm/mach-omap2/omap_device.h
> @@ -29,6 +29,7 @@
> #include "omap_hwmod.h"
>
> extern struct dev_pm_domain omap_device_pm_domain;
> +extern struct dev_pm_domain omap_device_fail_pm_domain;
>
> /* omap_device._state values */
> #define OMAP_DEVICE_STATE_UNKNOWN 0
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists