lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <201312050338.54841.arnd@arndb.de>
Date:	Thu, 5 Dec 2013 03:38:54 +0100
From:	Arnd Bergmann <arnd@...db.de>
To:	haver@...ux.vnet.ibm.com
Cc:	linux-kernel@...r.kernel.org, gregkh@...uxfoundation.org,
	cody@...ux.vnet.ibm.com, schwidefsky@...ibm.com,
	utz.bacher@...ibm.com, mmarek@...e.cz, rmallon@...il.com,
	jsvogt@...ibm.com, MIJUNG@...ibm.com, cascardo@...ux.vnet.ibm.com,
	michael@...ra.de
Subject: Re: [PATCH 1/6] GenWQE PCI support, health monitoring and recovery

On Wednesday 04 December 2013, Frank Haverkamp wrote:
> Hi Arnd & Greg,
> 
> please let me know if my following changes are ok:
> 
> Am Dienstag, den 03.12.2013, 15:28 +0100 schrieb Frank Haverkamp:
> 
> > +/* Read/write from/to registers */
> > +struct genwqe_regs_io {
> > +       __u32 num;              /* register offset/address */
> > +       union {
> > +               __u64 val64;
> > +               __u32 val32;
> > +               __u16 define;
> > +       };
> > +};
> 
> Here I am using now:
> 
> struct genwqe_regs_io {
> 	__u64 num;		/* register offset/address */
> 	union {
> 		__u64 val64;
> 		__u32 val32;
> 		__u16 define;
> 	};
> };

This is not a bug anymore, but it seems pointless to use a union
there rather than just a __u64 for the value.

> Here I reordered and resized the members like this:
> 
> struct genwqe_bitstream {
> 	__u64 data_addr;		/* pointer to image data */
> 	__u32 size;			/* size of image file */
> 	__u32 crc;			/* crc of this image */
> 	__u64 target_addr;		/* starting address in Flash */
> 	__u32 partition;		/* '0', '1', or 'v' */
> 	__u32 uid;			/* 1=host/x=dram */
> 
> 	__u64 slu_id;			/* informational/sim: SluID */
> 	__u64 app_id;			/* informational/sim: AppID */
> 
> 	__u16 retc;			/* returned from processing */
> 	__u16 attn;			/* attention code from processing */
> 	__u32 progress;			/* progress code from processing */
> };

Yes, this is fine.

> > +struct genwqe_debug_data {
> > +       char driver_version[64];
> > +       __u64 slu_unitcfg;
> > +       __u64 app_unitcfg;
> > +
> > +       __u8  ddcb_before[DDCB_LENGTH];
> > +       __u8  ddcb_prev[DDCB_LENGTH];
> > +       __u8  ddcb_finished[DDCB_LENGTH];
> > +};
> > +
> 
> This I hope is ok. DDCB_LENGTH is 256.

Yes.

> 
> Was this already ok? My new version looks as follows:

The old version was wrong.

> struct genwqe_ddcb_cmd {
> 	/* START of data copied to/from driver */
> 	__u64 next_addr;		/* chaining genwqe_ddcb_cmd */
> 	__u64 flags;			/* reserved */
> 
> 	__u8  acfunc;			/* accelerators functional unit */
> 	__u8  cmd;			/* command to execute */
> 	__u8  asiv_length;		/* used parameter length */
> 	__u8  asv_length;		/* length of valid return values  */
> 	__u16 cmdopts;			/* command options */
> 	__u16 retc;			/* return code from processing    */


> 	__u16 attn;			/* attention code from processing */
> 	__u16 vcrc;			/* variant crc16 */
> 	__u32 progress;			/* progress code from processing  */
> 
> 	__u64 deque_ts;			/* dequeue time stamp */
> 	__u64 cmplt_ts;			/* completion time stamp */
> 	__u64 disp_ts;			/* SW processing start */
> 
> 	/* move to end and avoid copy-back */
> 	__u64 ddata_addr;		/* collect debug data */
> 
> 	/* command specific values */
> 	__u8  asv[DDCB_ASV_LENGTH];
> 
> 	/* END of data copied from driver */
> 	union {
> 		struct {
> 			__u64 ats;
> 			__u8  asiv[DDCB_ASIV_LENGTH_ATS];
> 		};
> 		/* used for flash update to keep it backward compatible */
> 		__u8 __asiv[DDCB_ASIV_LENGTH];
> 	};
> 	/* END of data copied to driver */
> };
> 
> Trying to group the data in 64bit chunks even nicer than I had it
> before.

Yes, this works, although I would argue that it is too complex to be a nice
interface.

> > +/**
> > + * struct genwqe_mem - Memory pinning/unpinning information
> > + * @addr:          virtual user space address
> > + * @size:          size of the area pin/dma-map/unmap
> > + * direction:      0: read/1: read and write
> > + *
> > + * Avoid pinning and unpinning of memory pages dynamically. Instead
> > + * the idea is to pin the whole buffer space required for DDCB
> > + * opertionas in advance. The driver will reuse this pinning and the
> > + * memory associated with it to setup the sglists for the DDCB
> > + * requests without the need to allocate and free memory or map and
> > + * unmap to get the DMA addresses.
> > + *
> > + * The inverse operation needs to be called after the pinning is not
> > + * needed anymore. The pinnings else the pinnings will get removed
> > + * after the device is closed. Note that pinnings will required
> > + * memory.
> > + */
> > +struct genwqe_mem {
> > +       unsigned long addr;
> > +       unsigned long size;
> > +       int direction;
> > +};
> 
> Was wrong, as already pointed out before. It is now:
> 
> struct genwqe_mem {
> 	__u64 addr;
> 	__u64 size;
> 	int direction;
> };
> 
> I hope the int is ok here.

No, it's not. The problem is that sizeof(struct genwqe_mem) is now 24 on
most architectures (including x86-64) and 20 on x86-32. The size gets
encoded into the ioctl number, at least after you fix this part:

> > +
> > +#define GENWQE_PIN_MEM       _IOWR(GENWQE_IOC_CODE, 40, struct
> > genwqe_mem *)
> > +#define GENWQE_UNPIN_MEM      _IOWR(GENWQE_IOC_CODE, 41, struct
> > genwqe_mem *)

... which is also broken because sizeof(struct genwqe_mem *) is 8 on
64-bit and 4 on 32-bit architectures. The argument to _IOWR() is
supposed to be struct, not a pointer. I thought we would actually
cause a build-time warning about this bug (I wrote the code to do that)
but I may be misremembering which bugs we can actually catch.

> > +/*
> > + * Generic synchronous DDCB execution interface.
> > + * Synchronously execute a DDCB.
> > + *
> > + * Return: 0 on success or negative error code.
> > + *         -EINVAL: Invalid parameters (ASIV_LEN, ASV_LEN, illegal
> > fixups
> > + *                  no mappings found/could not create mappings
> > + *         -EFAULT: illegal addresses in fixups, purging failed
> > + *         -EBADMSG: enqueing failed, retc != DDCB_RETC_COMPLETE
> > + */
> > +#define GENWQE_EXECUTE_DDCB                                    \
> > +       _IOWR(GENWQE_IOC_CODE, 50, struct genwqe_ddcb_cmd *)
> > +
> > +#define
> > GENWQE_EXECUTE_RAW_DDCB                                        \
> > +       _IOWR(GENWQE_IOC_CODE, 51, struct genwqe_ddcb_cmd *)
> > +
> > +/* Service Layer functions (PF only) */
> > +#define GENWQE_SLU_UPDATE  _IOWR(GENWQE_IOC_CODE, 80, struct
> > genwqe_bistream *)
> > +#define GENWQE_SLU_READ           _IOWR(GENWQE_IOC_CODE, 81, struct
> > genwqe_bistream *)

Same bug for all of these.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ