| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1386289336-26704-3-git-send-email-sre@debian.org>
Date: Fri, 6 Dec 2013 01:22:13 +0100
From: Sebastian Reichel <sre@...ian.org>
To: Sebastian Reichel <sre@...g0.de>, Luciano Coelho <luca@...lho.fi>,
Tony Lindgren <tony@...mide.com>,
"John W. Linville" <linville@...driver.com>
Cc: Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Landley <rob@...dley.net>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-wireless@...r.kernel.org,
linux-omap@...r.kernel.org, netdev@...r.kernel.org,
Sebastian Reichel <sre@...ian.org>
Subject: [PATCHv2 2/5] wl1251: move power GPIO handling into the driver
Move the power GPIO handling from the board code into
the driver. This is a dependency for device tree support.
Signed-off-by: Sebastian Reichel <sre@...ian.org>
Reviewed-by: Pavel Machek <pavel@....cz>
---
arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
arch/arm/mach-omap2/board-rx51-peripherals.c | 11 ++--------
drivers/net/wireless/ti/wl1251/sdio.c | 21 +++++++++++++-----
drivers/net/wireless/ti/wl1251/spi.c | 33 ++++++++++++++++++----------
drivers/net/wireless/ti/wl1251/wl1251.h | 2 +-
include/linux/wl12xx.h | 2 +-
6 files changed, 43 insertions(+), 28 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 24f3c1b..cf18340 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -541,6 +541,8 @@ static void __init pandora_wl1251_init(void)
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
+ pandora_wl1251_pdata.power_gpio = -1;
+
ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
if (ret < 0)
goto fail;
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 01e8bef..6538184 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1166,13 +1166,7 @@ static inline void board_smc91x_init(void)
#endif
-static void rx51_wl1251_set_power(bool enable)
-{
- gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
-}
-
static struct gpio rx51_wl1251_gpios[] __initdata = {
- { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" },
{ RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" },
};
@@ -1189,17 +1183,16 @@ static void __init rx51_init_wl1251(void)
if (irq < 0)
goto err_irq;
- wl1251_pdata.set_power = rx51_wl1251_set_power;
+ wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO;
rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
return;
err_irq:
gpio_free(RX51_WL1251_IRQ_GPIO);
- gpio_free(RX51_WL1251_POWER_GPIO);
error:
printk(KERN_ERR "wl1251 board initialisation failed\n");
- wl1251_pdata.set_power = NULL;
+ wl1251_pdata.power_gpio = -1;
/*
* Now rx51_peripherals_spi_board_info[1].irq is zero and
diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
index b75a37a..b661f89 100644
--- a/drivers/net/wireless/ti/wl1251/sdio.c
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -28,6 +28,7 @@
#include <linux/wl12xx.h>
#include <linux/irq.h>
#include <linux/pm_runtime.h>
+#include <linux/gpio.h>
#include "wl1251.h"
@@ -182,8 +183,9 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
* callback in case it wants to do any additional setup,
* for example enabling clock buffer for the module.
*/
- if (wl->set_power)
- wl->set_power(true);
+ if (gpio_is_valid(wl->power_gpio))
+ gpio_set_value(wl->power_gpio, true);
+
ret = pm_runtime_get_sync(&func->dev);
if (ret < 0) {
@@ -203,8 +205,8 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
if (ret < 0)
goto out;
- if (wl->set_power)
- wl->set_power(false);
+ if (gpio_is_valid(wl->power_gpio))
+ gpio_set_value(wl->power_gpio, false);
}
out:
@@ -256,11 +258,20 @@ static int wl1251_sdio_probe(struct sdio_func *func,
wl1251_board_data = wl1251_get_platform_data();
if (!IS_ERR(wl1251_board_data)) {
- wl->set_power = wl1251_board_data->set_power;
+ wl->power_gpio = wl1251_board_data->power_gpio;
wl->irq = wl1251_board_data->irq;
wl->use_eeprom = wl1251_board_data->use_eeprom;
}
+ if (gpio_is_valid(wl->power_gpio)) {
+ ret = devm_gpio_request(&func->dev, wl->power_gpio,
+ "wl1251 power");
+ if (ret) {
+ wl1251_error("Failed to request gpio: %d\n", ret);
+ goto disable;
+ }
+ }
+
if (wl->irq) {
irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 62403a1..6abcbc3 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -26,6 +26,7 @@
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
+#include <linux/gpio.h>
#include "wl1251.h"
#include "reg.h"
@@ -221,8 +222,8 @@ static void wl1251_spi_disable_irq(struct wl1251 *wl)
static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
{
- if (wl->set_power)
- wl->set_power(enable);
+ if (gpio_is_valid(wl->power_gpio))
+ gpio_set_value(wl->power_gpio, enable);
return 0;
}
@@ -271,22 +272,33 @@ static int wl1251_spi_probe(struct spi_device *spi)
goto out_free;
}
- wl->set_power = pdata->set_power;
- if (!wl->set_power) {
- wl1251_error("set power function missing in platform data");
- return -ENODEV;
+ wl->power_gpio = pdata->power_gpio;
+
+ if (gpio_is_valid(wl->power_gpio)) {
+ ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
+ GPIOF_OUT_INIT_LOW, "wl1251 power");
+ if (ret) {
+ wl1251_error("Failed to request gpio: %d\n", ret);
+ goto out_free;
+ }
+ } else {
+ wl1251_error("set power gpio missing in platform data");
+ ret = -ENODEV;
+ goto out_free;
}
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1251_error("irq missing in platform data");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out_free;
}
wl->use_eeprom = pdata->use_eeprom;
irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
- ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
+ ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0,
+ DRIVER_NAME, wl);
if (ret < 0) {
wl1251_error("request_irq() failed: %d", ret);
goto out_free;
@@ -296,13 +308,10 @@ static int wl1251_spi_probe(struct spi_device *spi)
ret = wl1251_init_ieee80211(wl);
if (ret)
- goto out_irq;
+ goto out_free;
return 0;
- out_irq:
- free_irq(wl->irq, wl);
-
out_free:
ieee80211_free_hw(hw);
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 2c3bd1b..f396a95 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -275,7 +275,7 @@ struct wl1251 {
void *if_priv;
const struct wl1251_if_operations *if_ops;
- void (*set_power)(bool enable);
+ int power_gpio;
int irq;
bool use_eeprom;
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index b516b4f..a9c723b 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -49,7 +49,7 @@ enum {
};
struct wl1251_platform_data {
- void (*set_power)(bool enable);
+ int power_gpio;
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
int irq;
bool use_eeprom;
--
1.8.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists