linux-kernel - RE: [PATCH 3/3 v5] usb: chipidea: put hw_phymode_configure before ci_usb_phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <F281D0F91ED19E4D8E63A7504E8A649804145AFC@039-SN2MPN1-021.039d.mgd.msft.net>
Date:	Fri, 6 Dec 2013 07:42:44 +0000
From:	Peter Chen <Peter.Chen@...escale.com>
To:	Chris Ruehl <chris.ruehl@...ys.com.hk>
CC:	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 3/3 v5] usb: chipidea: put hw_phymode_configure before
  ci_usb_phy_init

 
> 
> usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
> 
> hw_phymode_configure configures the PORTSC registers and allow the
> following phy_inits to operate on the right parameters. This fix a
> problem
> where the UPLI (ISP1504) could not be detected, because the Viewport was
> not
> available and read the viewport return 0's only.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@...ys.com.hk>
> Acked-by: Peter Chen <peter.chen@...escale.com>
> ---
>  drivers/usb/chipidea/core.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 2834801..43897dd 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -564,6 +564,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	}
> 
> +	hw_phymode_configure(ci);
> +
>  	ret = ci_usb_phy_init(ci);
>  	if (ret) {
>  		dev_err(dev, "unable to init phy: %d\n", ret);
> @@ -581,8 +583,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> 
>  	ci_get_otg_capable(ci);
> 
> -	hw_phymode_configure(ci);
> -
>  	dr_mode = ci->platdata->dr_mode;
>  	/* initialize role(s) before the interrupt is requested */
>  	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
> --
> 1.7.10.4
> 

Applied, Thanks.

Peter


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/