[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1386582147-9802-1-git-send-email-dyoung@redhat.com>
Date: Mon, 9 Dec 2013 17:42:13 +0800
From: Dave Young <dyoung@...hat.com>
To: linux-kernel@...r.kernel.org
Cc: linux-efi@...r.kernel.org, x86@...nel.org, mjg59@...f.ucam.org,
hpa@...or.com, James.Bottomley@...senPartnership.com,
vgoyal@...hat.com, ebiederm@...ssion.com, horms@...ge.net.au,
kexec@...ts.infradead.org, bp@...en8.de, greg@...ah.com,
matt@...sole-pimps.org, toshi.kani@...com
Subject: [PATCH v5 00/14] kexec kernel efi runtime support
Hi,
Here is the V5 patchset for supporting kexec kernel efi runtime.
Per pervious discussion I pass the 1st kernel efi runtime mapping
via setup_data to 2nd kernel. Besides of the runtime mapping
info I also pass the fw_vendor, runtime, config table, smbios
physical address in setup_data. EFI spec mentioned fw_vendor,
runtime, config table addresses will be converted to virt address
after entering virtual mode, but we will use it as physical address
in efi_init. For smbios EFI spec did not mention about the address
updating, but during my test on a HP workstation, the bios will
convert it to Virt addr, thus pass it in setup_data as well.
For fw_vendor, runtime, config table, I export them in /sys/firmware/
efi/, smbios is already in /sys/firmware/efi/systab.
For efi runtime mapping I add a new directory /sys/firmware/efi/
runtime-map/ like below
[dave@...kstar ~]$ tree /sys/firmware/efi/runtime-map/
/sys/firmware/efi/runtime-map/
|__ 0
| |__ attribute
| |__ num_pages
| |__ phys_addr
| |__ type
| |__ virt_addr
|__ 1
[snip]
kexec-tools will assemble them as setup_data and pass to 2nd kernel.
I will send userspace patches as well.
Limitation is I only write support for x86_64, test on below machines:
Lenovo thinkpad t420
Dell inspiron 14 - 3421
HP Z420 workstation
Qemu + OVMF
The patches are based on linus tree + matt's efi master tree
Changes from v1:
add one flag in xloadflags, so kexec-tools can safely load old kernel
without efi support.
coding style fixes
function name for map phys_addr to fixed virt_addr
Add ABI documentation for sysfs files
Changes from v2:
01/09: a new patch to remove unused variables in __map_region function
catched by Toshi Kani
09/09: a new patch to export x86 boot_params to sysfs instead of use
debugfs files
Matt: reuse __map_region instead do same thing in another function.
add a wrapper function efi_map_region_fixed [02/09]
check return value of krealloc
sysfs dir name s/efi-runtime-map/runtime-map [06/09]
use desc_size in efi_runtime_map
for the xloadflags defination: +&& defined(CONFIG_KEXEC)
Greg: sysfs : one file one value for fw_vendor, runtime, tables. [05/09]
Document them in ABI testing
HPA: Document the new xloadflag
Also there's other function cleanup and improvement for error handling.
Changes from v3:
Greg: sysfs code move to use __ATTR_RO and attr_group
Boris: comments and code alignment
Added 3 new patches below
10-print-efi-runtime-memmap.patch
- 10/12: print only runtime ranges in case EFI_DEBUG printing
11-reserve-setup-data-late.patch
- fix a bug of kdump kernel, move function for reserving setup data
ranges late after parsing memmap= cmdline params because kdump kernel
will pass exact memmap late.
12-x86-kdebugfs-use-ioremap.patch
- fix a bug of x86/kernel/kdebugfs.c, use ioremap instead of __va for
low mem because __va does not work for exact memmap=
Changes from V4:
- variable efi_setup in 09/14 is changed to the physical address instead of the virtual address
because it will be not iounmapped until entering virtual mode, it's too long and could cause
leak.
- sparse warnings fixes (Matt):
Added 2 new patches to addressing sparse warnings:
01/14: x86-mm-sparse-warning-fix-for-early_memremap.patch
02/14: efi-use-early_memremap-and-early_memunmap.patch
- krealloc fixes (Boris)
- rebase on top of Linus tree + Matt's efi master tree (Boris)
- a lot of documention/spelling fixes (Boris)
- share function save_runtime_map in 1st/2nd kernel code (Matt)
- style and other fixes detail see the patch changelog themselves.
Boris: I still use the function name efi_reuse_config because it could be not only a problem for
HP workstation, also because we will later split them to another file so efi_ is acceptable for me.
The patches stay in kexec-efi-testing branch of below repo for testing:
https://github.com/daveyoung/linux.git
Dave Young (14):
x86/mm: sparse warning fix for early_memremap
efi: use early_memremap and early_memunmap
efi: remove unused variables in __map_region
efi: add a wrapper function efi_map_region_fixed
efi: reserve boot service fix
efi: cleanup efi_enter_virtual_mode function
efi: export more efi table variable to sysfs
efi: export efi runtime memory mapping to sysfs
efi: passing kexec necessary efi data via setup_data
efi: only print saved efi runtime maps instead of all memmap ranges
for kexec
x86: add xloadflags bit for efi runtime support on kexec
x86: export x86 boot_params to sysfs
x86: reserve setup_data ranges late after parsing memmap cmdline
x86: kdebugfs do not use __va for getting setup_data virt addr
Documentation/ABI/testing/sysfs-firmware-efi | 24 ++
.../ABI/testing/sysfs-firmware-efi-runtime-map | 36 ++
Documentation/ABI/testing/sysfs-kernel-boot_params | 39 +++
Documentation/x86/boot.txt | 3 +
arch/x86/boot/header.S | 9 +-
arch/x86/include/asm/efi.h | 12 +
arch/x86/include/asm/io.h | 3 +-
arch/x86/include/uapi/asm/bootparam.h | 2 +
arch/x86/kernel/Makefile | 1 +
arch/x86/kernel/kdebugfs.c | 35 +-
arch/x86/kernel/ksysfs.c | 339 ++++++++++++++++++
arch/x86/kernel/setup.c | 7 +-
arch/x86/mm/ioremap.c | 10 +-
arch/x86/platform/efi/efi.c | 378 ++++++++++++++++-----
arch/x86/platform/efi/efi_32.c | 2 +
arch/x86/platform/efi/efi_64.c | 16 +-
drivers/firmware/efi/Kconfig | 11 +
drivers/firmware/efi/Makefile | 1 +
drivers/firmware/efi/efi.c | 47 ++-
drivers/firmware/efi/runtime-map.c | 176 ++++++++++
include/linux/efi.h | 9 +
21 files changed, 1038 insertions(+), 122 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-firmware-efi
create mode 100644 Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
create mode 100644 Documentation/ABI/testing/sysfs-kernel-boot_params
create mode 100644 arch/x86/kernel/ksysfs.c
create mode 100644 drivers/firmware/efi/runtime-map.c
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists