linux-kernel - [RFCv4 05/11] Documentation: DT: omap-ssi binding documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1387150085-23173-6-git-send-email-sre@debian.org>
Date:	Mon, 16 Dec 2013 00:27:58 +0100
From:	Sebastian Reichel <sre@...ian.org>
To:	Sebastian Reichel <sre@...g0.de>,
	Linus Walleij <linus.walleij@...aro.org>,
	Shubhrajyoti Datta <omaplinuxkernel@...il.com>,
	Carlos Chinea <cch.devel@...il.com>
Cc:	Tony Lindgren <tony@...mide.com>,
	Grant Likely <grant.likely@...aro.org>,
	Rob Herring <rob.herring@...xeda.com>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Stephen Warren <swarren@...dotorg.org>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Rob Landley <rob@...dley.net>,
	'Benoît Cousson' <bcousson@...libre.com>,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-omap@...r.kernel.org,
	Pali Rohár <pali.rohar@...il.com>,
	Ивайло Димитров 
	<freemangordon@....bg>,
	Joni Lapilainen <joni.lapilainen@...il.com>,
	Aaro Koskinen <aaro.koskinen@....fi>,
	Sebastian Reichel <sre@...ian.org>
Subject: [RFCv4 05/11] Documentation: DT: omap-ssi binding documentation

Create device tree binding documentation for
OMAP Synchronous Serial Interface (SSI) device.

Signed-off-by: Sebastian Reichel <sre@...ian.org>
---
 Documentation/devicetree/bindings/hsi/omap_ssi.txt | 69 ++++++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt

diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
new file mode 100644
index 0000000..0a9efd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
@@ -0,0 +1,69 @@
+OMAP SSI controller bindings
+
+Required properties:
+- compatible:		Should include "ti,omap3-ssi".
+- reg-names:		Contains the values "sys" and "gdd".
+- reg:			Contains a register specifier for each entry in
+			reg-names.
+- interrupt-names:      Contains the value "gdd_mpu".
+- interrupts: 		Contains interrupt information for each entry in
+			interrupt-names.
+- ranges		Represents the bus address mapping between the main
+			controller node and the child nodes below.
+- #address-cells	Should be set to <1>
+- #size-cells		Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible:		Should be set to the following value
+                        ti,omap3-ssi-port (applicable to OMAP34xx devices)
+- reg-names:		Contains the values "rx" and "tx".
+- reg:			Contains a register specifier for each entry in
+			reg-names.
+- interrupt-parent	Should be a phandle for the interrupt controller
+- interrupt-names:	Contains the values "mpu_irq0" and "mpu_irq1".
+- interrupts:		Contains interrupt information for each entry in
+			interrupt-names.
+- ti,ssi-cawake-gpio:	Defines which GPIO pin is used to signify CAWAKE
+			events for the port. This is an optional board-specific
+			property. If it's missing the port will not be
+			enabled.
+
+Example for Nokia N900:
+
+ssi-controller@...58000 {
+	compatible = "ti,omap3-ssi";
+
+	/* needed until hwmod is updated to use the compatible string */
+	ti,hwmods = "ssi";
+
+	reg = <0x48058000 0x1000>,
+	      <0x48059000 0x1000>;
+	reg-names = "sys",
+		    "gdd";
+
+	interrupts = <55>;
+	interrupt-names = "gdd_mpu";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	ssi-port@0 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805a000 0x800>,
+		      <0x4805a800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>,
+			     <52>;
+		interrupt-names = "mpu_irq0",
+				  "mpu_irq1";
+
+		ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+	}
+}
-- 
1.8.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/