| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <d0d8cd19befa8757faf7660fd3ae619945b2cde4.1387140921.git.agordeev@redhat.com>
Date: Mon, 16 Dec 2013 09:34:59 +0100
From: Alexander Gordeev <agordeev@...hat.com>
To: linux-kernel@...r.kernel.org
Cc: Alexander Gordeev <agordeev@...hat.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Michael Ellerman <michael@...erman.id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Tejun Heo <tj@...nel.org>,
Ben Hutchings <bhutchings@...arflare.com>,
David Laight <David.Laight@...LAB.COM>,
Mark Lord <kernel@...rt.ca>, "H. Peter Anvin" <hpa@...or.com>,
linux-pci@...r.kernel.org
Subject: [PATCH v4 6/9] PCI/MSI: Factor out pci_get_msi_vec_count() interface
Device drivers can use this interface to obtain maximum number
of MSI interrupts the device supports and use that number i.e.
in a following call to pci_enable_msi_block() interface.
Signed-off-by: Alexander Gordeev <agordeev@...hat.com>
Reviewed-by: Tejun Heo <tj@...nel.org>
---
Documentation/PCI/MSI-HOWTO.txt | 15 ++++++++++++++
drivers/pci/msi.c | 41 +++++++++++++++++++++++++++++++-------
include/linux/pci.h | 6 +++++
3 files changed, 54 insertions(+), 8 deletions(-)
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index a4d174e..c03b815 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -169,6 +169,21 @@ on any interrupt for which it previously called request_irq().
Failure to do so results in a BUG_ON(), leaving the device with
MSI enabled and thus leaking its vector.
+4.2.5 pci_get_msi_vec_count
+
+int pci_get_msi_vec_count(struct pci_dev *dev)
+
+This function could be used to retrieve the number of MSI vectors the
+device requested (via the Multiple Message Capable register). The MSI
+specification only allows the returned value to be a power of two,
+up to a maximum of 2^5 (32).
+
+If this function returns a negative number, it indicates the device is
+not capable of sending MSIs.
+
+If this function returns a positive number, it indicates the maximum
+number of MSI interrupt vectors that could be allocated.
+
4.3 Using MSI-X
The MSI-X capability is much more flexible than the MSI capability.
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index c0e2259..8915edb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -834,6 +834,31 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
}
/**
+ * pci_get_msi_vec_count - Return the number of MSI vectors a device can send
+ * @dev: device to report about
+ *
+ * This function returns the number of MSI vectors a device requested via
+ * Multiple Message Capable register. It returns a negative errno if the
+ * device is not capable sending MSI interrupts. Otherwise, the call succeeds
+ * and returns a power of two, up to a maximum of 2^5 (32), according to the
+ * MSI specification.
+ **/
+int pci_get_msi_vec_count(struct pci_dev *dev)
+{
+ int ret;
+ u16 msgctl;
+
+ if (!dev->msi_cap)
+ return -EINVAL;
+
+ pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
+ ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+
+ return ret;
+}
+EXPORT_SYMBOL(pci_get_msi_vec_count);
+
+/**
* pci_enable_msi_block - configure device's MSI capability structure
* @dev: device to configure
* @nvec: number of interrupts to configure
@@ -849,13 +874,13 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
int pci_enable_msi_block(struct pci_dev *dev, int nvec)
{
int status, maxvec;
- u16 msgctl;
- if (!dev->msi_cap || dev->current_state != PCI_D0)
+ if (dev->current_state != PCI_D0)
return -EINVAL;
- pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
- maxvec = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+ maxvec = pci_get_msi_vec_count(dev);
+ if (maxvec < 0)
+ return maxvec;
if (nvec > maxvec)
return maxvec;
@@ -880,13 +905,13 @@ EXPORT_SYMBOL(pci_enable_msi_block);
int pci_enable_msi_block_auto(struct pci_dev *dev, int *maxvec)
{
int ret, nvec;
- u16 msgctl;
- if (!dev->msi_cap || dev->current_state != PCI_D0)
+ if (dev->current_state != PCI_D0)
return -EINVAL;
- pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
- ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+ ret = pci_get_msi_vec_count(dev);
+ if (ret < 0)
+ return ret;
if (maxvec)
*maxvec = ret;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 8cf7b15..997751d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1154,6 +1154,11 @@ struct msix_entry {
#ifndef CONFIG_PCI_MSI
+static inline int pci_get_msi_vec_count(struct pci_dev *dev)
+{
+ return -ENOSYS;
+}
+
static inline int pci_enable_msi_block(struct pci_dev *dev, int nvec)
{
return -ENOSYS;
@@ -1195,6 +1200,7 @@ static inline int pci_msi_enabled(void)
return 0;
}
#else
+int pci_get_msi_vec_count(struct pci_dev *dev);
int pci_enable_msi_block(struct pci_dev *dev, int nvec);
int pci_enable_msi_block_auto(struct pci_dev *dev, int *maxvec);
void pci_msi_shutdown(struct pci_dev *dev);
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists