[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1387304012-23805-38-git-send-email-luis.henriques@canonical.com>
Date: Tue, 17 Dec 2013 18:12:26 +0000
From: Luis Henriques <luis.henriques@...onical.com>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org,
kernel-team@...ts.ubuntu.com
Cc: "Martin K. Petersen" <martin.petersen@...cle.com>,
James Bottomley <JBottomley@...allels.com>,
Luis Henriques <luis.henriques@...onical.com>
Subject: [PATCH 3.5 037/103] [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
3.5.7.28 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Martin K. Petersen" <martin.petersen@...cle.com>
commit 54b2b50c20a61b51199bedb6e5d2f8ec2568fb43 upstream.
Some host adapters do not pass commands through to the target disk
directly. Instead they provide an emulated target which may or may not
accurately report its capabilities. In some cases the physical device
characteristics are reported even when the host adapter is processing
commands on the device's behalf. This can lead to adapter firmware hangs
or excessive I/O errors.
This patch disables WRITE SAME for devices connected to host adapters
that provide an emulated target. Driver writers can disable WRITE SAME
by setting the no_write_same flag in the host adapter template.
[jejb: fix up rejections due to eh_deadline patch]
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: James Bottomley <JBottomley@...allels.com>
[ luis: backported to 3.5:
- adjusted context
- dropped changes to drivers/scsi/sd.c ]
Signed-off-by: Luis Henriques <luis.henriques@...onical.com>
---
drivers/ata/libata-scsi.c | 1 +
drivers/firewire/sbp2.c | 1 +
drivers/scsi/3w-9xxx.c | 3 ++-
drivers/scsi/3w-sas.c | 3 ++-
drivers/scsi/3w-xxxx.c | 3 ++-
drivers/scsi/aacraid/linit.c | 1 +
drivers/scsi/arcmsr/arcmsr_hba.c | 1 +
drivers/scsi/gdth.c | 1 +
drivers/scsi/hosts.c | 1 +
drivers/scsi/hpsa.c | 1 +
drivers/scsi/ipr.c | 3 ++-
drivers/scsi/ips.c | 1 +
drivers/scsi/megaraid.c | 1 +
drivers/scsi/megaraid/megaraid_mbox.c | 1 +
drivers/scsi/megaraid/megaraid_sas_base.c | 1 +
drivers/scsi/pmcraid.c | 1 +
drivers/scsi/storvsc_drv.c | 1 +
include/scsi/scsi_host.h | 6 ++++++
18 files changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 15863a4..be8ac7e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3393,6 +3393,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
shost->max_lun = 1;
shost->max_channel = 1;
shost->max_cmd_len = 16;
+ shost->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer()
* callback and it needs to see every deferred qc.
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 1162d6b..4882873 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1628,6 +1628,7 @@ static struct scsi_host_template scsi_driver_template = {
.cmd_per_lun = 1,
.can_queue = 1,
.sdev_attrs = sbp2_scsi_sysfs_attrs,
+ .no_write_same = 1,
};
MODULE_AUTHOR("Kristian Hoegsberg <krh@...planet.net>");
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 3868ab2..9f7a640 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2025,7 +2025,8 @@ static struct scsi_host_template driver_template = {
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twa_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index 13e39e1..e8a6c26 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1600,7 +1600,8 @@ static struct scsi_host_template driver_template = {
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twl_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 7fe96ff..29aafd4 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -2277,7 +2277,8 @@ static struct scsi_host_template driver_template = {
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = tw_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index e9313f8..fa27838 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1087,6 +1087,7 @@ static struct scsi_host_template aac_driver_template = {
#endif
.use_clustering = ENABLE_CLUSTERING,
.emulated = 1,
+ .no_write_same = 1,
};
static void __aac_shutdown(struct aac_dev * aac)
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index cbde1dc..fc658f9 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -137,6 +137,7 @@ static struct scsi_host_template arcmsr_scsi_host_template = {
.cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = arcmsr_host_attrs,
+ .no_write_same = 1,
};
static struct pci_device_id arcmsr_device_id_table[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 5d72274..cac71cb 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -4691,6 +4691,7 @@ static struct scsi_host_template gdth_template = {
.cmd_per_lun = GDTH_MAXC_P_L,
.unchecked_isa_dma = 1,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
#ifdef CONFIG_ISA
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index b48c24f..4a982a2 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -388,6 +388,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
shost->unchecked_isa_dma = sht->unchecked_isa_dma;
shost->use_clustering = sht->use_clustering;
shost->ordered_tag = sht->ordered_tag;
+ shost->no_write_same = sht->no_write_same;
if (sht->supported_mode == MODE_UNKNOWN)
/* means we didn't set it ... default to INITIATOR */
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index cb00d70..c130325 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -538,6 +538,7 @@ static struct scsi_host_template hpsa_driver_template = {
.sdev_attrs = hpsa_sdev_attrs,
.shost_attrs = hpsa_shost_attrs,
.max_sectors = 8192,
+ .no_write_same = 1,
};
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 467dc38..9013452 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -5947,7 +5947,8 @@ static struct scsi_host_template driver_template = {
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ipr_ioa_attrs,
.sdev_attrs = ipr_dev_attrs,
- .proc_name = IPR_NAME
+ .proc_name = IPR_NAME,
+ .no_write_same = 1,
};
/**
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index b6d7a5c..a96b45a 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -374,6 +374,7 @@ static struct scsi_host_template ips_driver_template = {
.sg_tablesize = IPS_MAX_SG,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 4d39a9f..8e2500b 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4521,6 +4521,7 @@ static struct scsi_host_template megaraid_template = {
.eh_device_reset_handler = megaraid_reset,
.eh_bus_reset_handler = megaraid_reset,
.eh_host_reset_handler = megaraid_reset,
+ .no_write_same = 1,
};
static int __devinit
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 35bd138..1277c38 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -367,6 +367,7 @@ static struct scsi_host_template megaraid_template_g = {
.eh_host_reset_handler = megaraid_reset_handler,
.change_queue_depth = megaraid_change_queue_depth,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
.sdev_attrs = megaraid_sdev_attrs,
.shost_attrs = megaraid_shost_attrs,
};
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 7593e28..7d8a678 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2084,6 +2084,7 @@ static struct scsi_host_template megasas_template = {
.bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
.change_queue_depth = megasas_change_queue_depth,
+ .no_write_same = 1,
};
/**
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index ea8a0b4..8b52a7e 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -4328,6 +4328,7 @@ static struct scsi_host_template pmcraid_host_template = {
.this_id = -1,
.sg_tablesize = PMCRAID_MAX_IOADLS,
.max_sectors = PMCRAID_IOA_MAX_SECTORS,
+ .no_write_same = 1,
.cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = pmcraid_host_attrs,
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 9f4e560..0374eee 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1402,6 +1402,7 @@ static struct scsi_host_template scsi_driver = {
.use_clustering = DISABLE_CLUSTERING,
/* Make sure we dont get a sg segment crosses a page boundary */
.dma_boundary = PAGE_SIZE-1,
+ .no_write_same = 1,
};
enum {
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 5f7d5b3..e2cc0b9 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -473,6 +473,9 @@ struct scsi_host_template {
*/
unsigned ordered_tag:1;
+ /* True if the controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Countdown for host blocking with no commands outstanding.
*/
@@ -672,6 +675,9 @@ struct Scsi_Host {
/* Don't resume host in EH */
unsigned eh_noresume:1;
+ /* The controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Optional work queue to be utilized by the transport
*/
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists