[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <52BC6B16.80507@ti.com>
Date: Thu, 26 Dec 2013 12:44:54 -0500
From: Santosh Shilimkar <santosh.shilimkar@...com>
To: Sricharan R <r.sricharan@...com>, <tony@...mide.com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-doc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-omap@...r.kernel.org>, <linus.walleij@...aro.org>,
<linux@....linux.org.uk>, <rnayak@...com>, <marc.zyngier@....com>,
<grant.likely@...aro.org>, <mark.rutland@....com>,
<robherring2@...il.com>, <tglx@...utronix.de>,
<galak@...eaurora.org>, <rob.herring@...xeda.com>, <nm@...com>,
<bcousson@...libre.com>
Subject: Re: [PATCH V5 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP
Sricharan,
On Wednesday 25 December 2013 11:52 PM, Sricharan R wrote:
> Hi Thomas,
> On Wednesday 18 December 2013 02:49 PM, Sricharan R wrote:
>> Hi Thomas,
>>
>> On Tuesday 03 December 2013 03:57 PM, Sricharan R wrote:
>>> Some socs have a large number of interrupts requests to service
>>> the needs of its many peripherals and subsystems. All of the interrupt
>>> requests lines from the subsystems are not needed at the same
>>> time, so they have to be muxed to the controllers appropriately.
>>> In such places a interrupt controllers are preceded by an
>>> IRQ CROSSBAR that provides flexibility in muxing the device interrupt
>>> requests to the controller inputs.
>>>
>>> This series models the peripheral interrupts that can be routed through
>>> the crossbar to the GIC as 'routable-irqs'. The routable irqs are added
>>> in a separate linear domain inside the GIC. The registered routable domain's
>>> callback are invoked as a part of the GIC's callback, which in turn should
>>> allocate a free irq line and configure the IP accordingly. So every peripheral
>>> in the dts files mentions the fixed crossbar number as its interrupt. A free
>>> gic line for that gets allocated and configured when the peripheral interrupts
>>> are mapped.
>>>
>>> The minimal crossbar driver to track and allocate free GIC lines and configure the
>>> crossbar is added here, along with the DT bindings.
>>>
>>> V5:
>>> Addressed a comment from Mark Rutland <mark.rutland@....com>,
>>> updated tags and rebased on 3.13-rc2
>>>
>>> V4:
>>> Addressed a couple of comments and split the DTS file updates in to
>>> a separate series.
>>>
>>> V3:
>>> Addressed few more comments from Thomas Gleixner <tglx@...utronix.de>
>>>
>>> Rebased patches 3,4,5,7 which updates the DTS file on top of below branch
>>> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
>>> for_3.13/dts
>>>
>>> Rebased patches 1,2,6 on top of 3.12 mainline
>>> Updated Commit tags
>>>
>>> V2:
>>> Addressed Thomas Gleixner <tglx@...utronix.de> comments and
>>> Kumar Gala <galak@...eaurora.org>
>>>
>>> Split updating the DRA7.dtsi file for adding the routable-irqs
>>>
>>> Previous discussions that led to this is at
>>> https://lkml.org/lkml/2013/9/18/540
>>>
>>> The V1,V2,V3,V4 post of these patches is at
>>> [V1] https://lkml.org/lkml/2013/9/30/283
>>> [V2] http://www.spinics.net/lists/linux-omap/msg99540.html
>>> [V3] http://www.kernelhub.org/?msg=356470&p=2
>>> [V4] http://www.spinics.net/lists/linux-doc/msg16726.html
>>>
>>> Sricharan R (4):
>>> DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
>>> DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
>>> ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number
>>> ARM: DRA: Enable Crossbar IP support for DRA7XX
>>>
>>> Documentation/devicetree/bindings/arm/gic.txt | 6 +
>>> .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++
>>> arch/arm/mach-omap2/Kconfig | 1 +
>>> arch/arm/mach-omap2/omap-wakeupgen.c | 4 +-
>>> arch/arm/mach-omap2/omap4-common.c | 2 +
>>> drivers/irqchip/Kconfig | 8 +
>>> drivers/irqchip/Makefile | 1 +
>>> drivers/irqchip/irq-crossbar.c | 208 ++++++++++++++++++++
>>> drivers/irqchip/irq-gic.c | 81 +++++++-
>>> include/linux/irqchip/arm-gic.h | 7 +-
>>> include/linux/irqchip/irq-crossbar.h | 11 ++
>>> 11 files changed, 343 insertions(+), 13 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt
>>> create mode 100644 drivers/irqchip/irq-crossbar.c
>>> create mode 100644 include/linux/irqchip/irq-crossbar.h
>>>
>>
>> I have addressed all the comments on this series, can this be merged now ?
>>
> Ping..
>
Thomas has already given his reviewed-by tag so the patches can be
taken via arm-soc tree considering OMAP and GIC changes. Can you
create a branch with all these patches applied and send it
to Tony ?
Tony, Will you able to pull this and send it up to arm-soc ?
Regards,
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists