| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 02 Jan 2014 12:20:14 -0800 From: Dave Hansen <dave@...1.net> To: linux-kernel@...r.kernel.org Cc: Dave Hansen <dave@...1.net>, linux-security-module@...r.kernel.org, linux-arch@...r.kernel.org Subject: [PATCH 1/3] kconfig: consolidate arch-specific seccomp options From: Dave Hansen <dave.hansen@...ux.intel.com> There are 7 architecures with "config SECCOMP". They all have virtually the same help text except for those referencing the /proc interface which was removed in 2007. There is *NOTHING* architecture-specific about SECCOMP except that the syscalls have per-architecture definitions, like every other syscall. It is absurd to have the option in the arch-specific menus. Move it to the security menu, consolidate the 7 down to one, and remove the embarassingly-ancient references to the /proc interface. Signed-off-by: Dave Hansen <dave.hansen@...ux.intel.com> Cc: linux-security-module@...r.kernel.org Cc: linux-arch@...r.kernel.org --- linux.git-davehans/arch/arm/Kconfig | 15 +-------------- linux.git-davehans/arch/microblaze/Kconfig | 18 +----------------- linux.git-davehans/arch/mips/Kconfig | 18 +----------------- linux.git-davehans/arch/powerpc/Kconfig | 18 +----------------- linux.git-davehans/arch/s390/Kconfig | 18 +----------------- linux.git-davehans/arch/sh/Kconfig | 17 +---------------- linux.git-davehans/arch/sparc/Kconfig | 18 +----------------- linux.git-davehans/arch/x86/Kconfig | 17 +---------------- linux.git-davehans/security/Kconfig | 21 ++++++++++++++++++++- 9 files changed, 28 insertions(+), 132 deletions(-) diff -puN arch/arm/Kconfig~consolidate-seccomp-options arch/arm/Kconfig --- linux.git/arch/arm/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.590785275 -0800 +++ linux.git-davehans/arch/arm/Kconfig 2014-01-02 11:23:58.609786130 -0800 @@ -26,6 +26,7 @@ config ARM select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) + select HAVE_ARCH_SECCOMP select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT select HAVE_CONTEXT_TRACKING @@ -1842,20 +1843,6 @@ config UACCESS_WITH_MEMCPY However, if the CPU data cache is using a write-allocate mode, this option is unlikely to provide any performance gain. -config SECCOMP - bool - prompt "Enable seccomp to safely compute untrusted bytecode" - ---help--- - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via prctl(PR_SET_SECCOMP), it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" help diff -puN arch/microblaze/Kconfig~consolidate-seccomp-options arch/microblaze/Kconfig --- linux.git/arch/microblaze/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.592785365 -0800 +++ linux.git-davehans/arch/microblaze/Kconfig 2014-01-02 11:23:58.609786130 -0800 @@ -11,6 +11,7 @@ config MICROBLAZE select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_OPROFILE select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG select TRACING_SUPPORT @@ -106,23 +107,6 @@ config CMDLINE_FORCE Set this to have arguments from the default kernel command string override those passed by the boot loader. -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - endmenu menu "Advanced setup" diff -puN arch/mips/Kconfig~consolidate-seccomp-options arch/mips/Kconfig --- linux.git/arch/mips/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.594785455 -0800 +++ linux.git-davehans/arch/mips/Kconfig 2014-01-02 11:23:58.610786175 -0800 @@ -10,6 +10,7 @@ config MIPS select PERF_USE_VMALLOC select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_SECCOMP select ARCH_HAVE_CUSTOM_GPIO_H select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST @@ -2305,23 +2306,6 @@ config PHYSICAL_START specified in the "crashkernel=YM@XM" command line boot parameter passed to the panic-ed kernel). -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" help diff -puN arch/powerpc/Kconfig~consolidate-seccomp-options arch/powerpc/Kconfig --- linux.git/arch/powerpc/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.596785545 -0800 +++ linux.git-davehans/arch/powerpc/Kconfig 2014-01-02 11:23:58.611786220 -0800 @@ -101,6 +101,7 @@ config PPC select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN select HAVE_KPROBES select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP select HAVE_KRETPROBES select HAVE_ARCH_TRACEHOOK select HAVE_MEMBLOCK @@ -626,23 +627,6 @@ config ARCH_WANTS_FREEZER_CONTROL source kernel/power/Kconfig -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - endmenu config ISA_DMA_API diff -puN arch/s390/Kconfig~consolidate-seccomp-options arch/s390/Kconfig --- linux.git/arch/s390/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.597785590 -0800 +++ linux.git-davehans/arch/s390/Kconfig 2014-01-02 11:23:58.611786220 -0800 @@ -105,6 +105,7 @@ config S390 select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_SECCOMP select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT select HAVE_BPF_JIT if 64BIT && PACK_STACK @@ -608,23 +609,6 @@ menu "Executable file formats / Emulatio source "fs/Kconfig.binfmt" -config SECCOMP - def_bool y - prompt "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. - endmenu menu "Power Management" diff -puN arch/sh/Kconfig~consolidate-seccomp-options arch/sh/Kconfig --- linux.git/arch/sh/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.599785680 -0800 +++ linux.git-davehans/arch/sh/Kconfig 2014-01-02 11:23:58.612786265 -0800 @@ -10,6 +10,7 @@ config SUPERH select HAVE_OPROFILE select HAVE_GENERIC_DMA_COHERENT select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_SECCOMP select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_PERF_EVENTS @@ -679,22 +680,6 @@ config PHYSICAL_START where the fail safe kernel needs to run at a different address than the panic-ed kernel. -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via prctl, it cannot be disabled and the task is only - allowed to execute a few safe syscalls defined by each seccomp - mode. - - If unsure, say N. - config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" depends on SUPERH32 diff -puN arch/sparc/Kconfig~consolidate-seccomp-options arch/sparc/Kconfig --- linux.git/arch/sparc/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.601785770 -0800 +++ linux.git-davehans/arch/sparc/Kconfig 2014-01-02 11:23:58.612786265 -0800 @@ -66,6 +66,7 @@ config SPARC64 select HAVE_SYSCALL_TRACEPOINTS select HAVE_CONTEXT_TRACKING select HAVE_DEBUG_KMEMLEAK + select HAVE_ARCH_SECCOMP if PROC_FS select RTC_DRV_CMOS select RTC_DRV_BQ4802 select RTC_DRV_SUN4V @@ -222,23 +223,6 @@ config EARLYFB help Say Y here to enable a faster early framebuffer boot console. -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on SPARC64 && PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" depends on SPARC64 && SMP diff -puN arch/x86/Kconfig~consolidate-seccomp-options arch/x86/Kconfig --- linux.git/arch/x86/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.603785860 -0800 +++ linux.git-davehans/arch/x86/Kconfig 2014-01-02 11:23:58.614786355 -0800 @@ -101,6 +101,7 @@ config X86 select GENERIC_SMP_IDLE_THREAD select ARCH_WANT_IPC_PARSE_VERSION if X86_32 select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_SECCOMP select BUILDTIME_EXTABLE_SORT select GENERIC_CMOS_UPDATE select HAVE_ARCH_SOFT_DIRTY @@ -1601,22 +1602,6 @@ config EFI_STUB See Documentation/efi-stub.txt for more information. -config SECCOMP - def_bool y - prompt "Enable seccomp to safely compute untrusted bytecode" - ---help--- - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via prctl(PR_SET_SECCOMP), it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection" ---help--- diff -puN security/Kconfig~consolidate-seccomp-options security/Kconfig --- linux.git/security/Kconfig~consolidate-seccomp-options 2014-01-02 11:23:58.604785905 -0800 +++ linux.git-davehans/security/Kconfig 2014-01-02 11:23:58.614786355 -0800 @@ -167,5 +167,24 @@ config DEFAULT_SECURITY default "yama" if DEFAULT_SECURITY_YAMA default "" if DEFAULT_SECURITY_DAC -endmenu +config HAVE_ARCH_SECCOMP + bool + +config SECCOMP + bool + default y + prompt "Enable seccomp to safely compute untrusted bytecode" + ---help--- + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + If unsure, say Y. Only embedded should say N here. + +endmenu _ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists