| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <52C5F69B.7040802@overkiz.com>
Date: Fri, 03 Jan 2014 00:30:35 +0100
From: boris brezillon <b.brezillon@...rkiz.com>
To: jjhiblot@...phandler.com, nicolas.ferre@...el.com
CC: jean-jacques hiblot <jean-jacques.hiblot@...u.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/6] Basic Device Tree support for the at91sam9261
Hello JJ,
On 31/12/2013 17:32, jjhiblot@...phandler.com wrote:
> From: jean-jacques hiblot <jean-jacques.hiblot@...u.com>
>
> This patch implements the basics to boot a at91sam9261ek with a dt-enabled
> kernel (at91_dt_defconfig).
> Only dbgu, nand and watchdog are described in the DT.
>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> ---
> arch/arm/boot/dts/at91sam9261.dtsi | 476 +++++++++++++++++++++++++++++++
> arch/arm/boot/dts/at91sam9261ek.dts | 75 +++++
> arch/arm/mach-at91/at91sam9261.c | 15 +
> arch/arm/mach-at91/at91sam9261_devices.c | 18 ++
Just a nitpick, but I guess it would be cleaner to split this patch:
1) add a91sam9261 dt SoC support
2) move at91sam9261ek board to dt
> 4 files changed, 584 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91sam9261.dtsi
> create mode 100644 arch/arm/boot/dts/at91sam9261ek.dts
>
> diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
> new file mode 100644
> index 0000000..ce23d7d
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9261.dtsi
> @@ -0,0 +1,476 @@
> +/*
> + * at91sam9261.dtsi - Device Tree Include file for AT91SAM9263 family SoC
> + *
> + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> + *
> + * Licensed under GPLv2 only.
> + */
> +
> +#include "skeleton.dtsi"
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Atmel AT91SAM9261 family SoC";
> + compatible = "atmel,at91sam9261";
> + interrupt-parent = <&aic>;
> +
> + aliases {
> + serial0 = &dbgu;
> + serial1 = &usart0;
> + serial2 = &usart1;
> + serial3 = &usart2;
> + gpio0 = &pioA;
> + gpio1 = &pioB;
> + gpio2 = &pioC;
> + tcb0 = &tcb0;
> + i2c0 = &i2c0;
> + ssc0 = &ssc0;
> + ssc1 = &ssc1;
> + };
> + cpus {
> + #address-cells = <0>;
> + #size-cells = <0>;
> +
> + cpu {
> + compatible = "arm,arm926ej-s";
> + device_type = "cpu";
> + };
> + };
> +
> + memory {
> + reg = <0x20000000 0x08000000>;
> + };
> +
> + ahb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + apb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + aic: interrupt-controller@...ff000 {
> + #interrupt-cells = <3>;
> + compatible = "atmel,at91rm9200-aic";
> + interrupt-controller;
> + reg = <0xfffff000 0x200>;
> + atmel,external-irqs = <29 30 31>;
> + };
> +
> + pmc: pmc@...ffc00 {
> + compatible = "atmel,at91rm9200-pmc";
> + reg = <0xfffffc00 0x100>;
> + };
> +
> + ramc: ramc@...fea00 {
> + compatible = "atmel,at91sam9260-sdramc";
> + reg = <0xffffea00 0x200>;
> + };
> +
> + pit: timer@...ffd30 {
> + compatible = "atmel,at91sam9260-pit";
> + reg = <0xfffffd30 0xf>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + };
> +
> + tcb0: timer@...a0000 {
> + compatible = "atmel,at91rm9200-tcb";
> + reg = <0xfffa0000 0x100>;
> + interrupts = < 17 IRQ_TYPE_LEVEL_HIGH 0
> + 18 IRQ_TYPE_LEVEL_HIGH 0
> + 19 IRQ_TYPE_LEVEL_HIGH 0
> + >;
> + status = "disabled";
> + };
> +
> + rstc@...ffd00 {
> + compatible = "atmel,at91sam9260-rstc";
> + reg = <0xfffffd00 0x10>;
> + };
> +
> + shdwc@...ffd10 {
> + compatible = "atmel,at91sam9260-shdwc";
> + reg = <0xfffffd10 0x10>;
> + };
> +
> + pinctrl@...ff400 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
> + ranges = <0xfffff400 0xfffff400 0xa00>;
> +
> + atmel,mux-mask = <
> + /* A B */
> + 0xffffffff 0xfffffff7 /* pioA */
> + 0xffffffff 0xfffffff4 /* pioB */
> + 0xffffffff 0xffffff07 /* pioC */
> + >;
> +
> + /* shared pinctrl settings */
> + dbgu {
> + pinctrl_dbgu: dbgu-0 {
> + atmel,pins =
> + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */
> + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */
> + };
> + };
> +
> + usart0 {
> + pinctrl_usart0: usart0-0 {
> + atmel,pins =
> + <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC8 periph A with pullup */
> + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A */
> + };
> +
> + pinctrl_usart0_rts: usart0_rts-0 {
> + atmel,pins =
> + <AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC10 periph A */
> + };
> +
> + pinctrl_usart0_cts: usart0_cts-0 {
> + atmel,pins =
> + <AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC11 periph A */
> + };
> + };
> +
> + usart1 {
> + pinctrl_usart1: usart1-0 {
> + atmel,pins =
> + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A with pullup */
> + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC13 periph A */
> + };
> +
> + pinctrl_usart1_rts: usart1_rts-0 {
> + atmel,pins =
> + <AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA12 periph B */
> + };
> +
> + pinctrl_usart1_cts: usart1_cts-0 {
> + atmel,pins =
> + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA13 periph B */
> + };
> + };
> +
> + usart2 {
> + pinctrl_usart2: usart2-0 {
> + atmel,pins =
> + <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC14 periph A with pullup */
> + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC15 periph A */
> + };
> +
> + pinctrl_usart2_rts: usart2_rts-0 {
> + atmel,pins =
> + <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA15 periph B */
> + };
> +
> + pinctrl_usart2_cts: usart2_cts-0 {
> + atmel,pins =
> + <AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA16 periph B */
> + };
> + };
> +
> + nand {
> + pinctrl_nand: nand-0 {
> + atmel,pins =
> + <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC15 gpio RDY pin pull_up*/
> + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */
> + };
> + };
> +
> + mmc0 {
> + pinctrl_mmc0_clk: mmc0_clk-0 {
> + atmel,pins =
> + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B */
> + };
> +
> + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
> + atmel,pins =
> + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */
> + AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */
> + };
> +
> + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
> + atmel,pins =
> + <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */
> + AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */
> + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA6 periph B with pullup */
> + };
> + };
> +
> + ssc0 {
> + pinctrl_ssc0_tx: ssc0_tx-0 {
> + atmel,pins =
> + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB21 periph A */
> + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB22 periph A */
> + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */
> + };
> +
> + pinctrl_ssc0_rx: ssc0_rx-0 {
> + atmel,pins =
> + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */
> + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB25 periph A */
> + AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */
> + };
> + };
> +
> + ssc1 {
> + pinctrl_ssc1_tx: ssc1_tx-0 {
> + atmel,pins =
> + <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA17 periph B */
> + AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA18 periph B */
> + AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA19 periph B */
> + };
> +
> + pinctrl_ssc1_rx: ssc1_rx-0 {
> + atmel,pins =
> + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA20 periph B */
> + AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B */
> + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA22 periph B */
> + };
> + };
> +
> + spi0 {
> + pinctrl_spi0: spi0-0 {
> + atmel,pins =
> + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */
> + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */
> + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */
> + };
> + };
> +
> + spi1 {
> + pinctrl_spi1: spi1-0 {
> + atmel,pins =
> + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A SPI1_MISO pin */
> + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB31 periph A SPI1_MOSI pin */
> + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A SPI1_SPCK pin */
> + };
> + };
> +
> + tcb0 {
> + pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
> + atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
> + atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
> + atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
> + atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
> + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
> + atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
> + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
> + atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
> + atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + pioA: gpio@...ff400 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff400 0x200>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pioB: gpio@...ff600 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff600 0x200>;
> + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pioC: gpio@...ff800 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff800 0x200>;
> + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + dbgu: serial@...ff200 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffff200 0x200>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_dbgu>;
> + status = "disabled";
> + };
> +
> + usart0: serial@...b0000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb0000 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart0>;
> + status = "disabled";
> + };
> +
> + usart1: serial@...fb400 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb4000 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart1>;
> + status = "disabled";
> + };
> +
> + usart2: serial@...94000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb8000 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart2>;
> + status = "disabled";
> + };
> +
> + ssc0: ssc@...bc000 {
> + compatible = "atmel,at91rm9200-ssc";
> + reg = <0xfffbc000 0x4000>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
> + status = "disabled";
> + };
> +
> + ssc1: ssc@...c0000 {
> + compatible = "atmel,at91rm9200-ssc";
> + reg = <0xfffc0000 0x4000>;
> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
> + status = "disabled";
> + };
> +
> + usb1: gadget@...a4000 {
> + compatible = "atmel,at91rm9200-udc";
> + reg = <0xfffa4000 0x4000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c@...ac000 {
> + compatible = "atmel,at91sam9261-i2c";
> + reg = <0xfffac000 0x100>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + mmc0: mmc@...a8000 {
> + compatible = "atmel,hsmci";
> + reg = <0xfffa8000 0x600>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + watchdog@...ffd40 {
> + compatible = "atmel,at91sam9260-wdt";
> + reg = <0xfffffd40 0x10>;
> + status = "disabled";
> + };
> +
> + spi0: spi@...c8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0xfffc8000 0x200>;
> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi0>;
> + status = "disabled";
> + };
> +
> + spi1: spi@...cc000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0xfffcc000 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1>;
> + status = "disabled";
> + };
> + };
> +
> + nand0: nand@...00000 {
> + compatible = "atmel,at91rm9200-nand";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x40000000 0x10000000>;
> + atmel,nand-addr-offset = <22>;
> + atmel,nand-cmd-offset = <21>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_nand>;
> +
> + gpios = <&pioC 15 GPIO_ACTIVE_HIGH
> + &pioC 14 GPIO_ACTIVE_HIGH
> + 0
> + >;
> + status = "disabled";
> + };
> +
> + usb0: ohci@...00000 {
> + compatible = "atmel,at91rm9200-ohci", "usb-ohci";
> + reg = <0x00500000 0x100000>;
> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
> + status = "disabled";
> + };
> + };
> +
> + i2c@0 {
> + compatible = "i2c-gpio";
> + gpios = <&pioA 7 GPIO_ACTIVE_HIGH /* sda */
> + &pioA 8 GPIO_ACTIVE_HIGH /* scl */
> + >;
> + i2c-gpio,sda-open-drain;
> + i2c-gpio,scl-open-drain;
> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> new file mode 100644
> index 0000000..f3d22a9
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -0,0 +1,75 @@
> +/*
> + * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
> + *
> + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> + *
> + * Licensed under GPLv2 only.
> + */
> +/dts-v1/;
> +#include "at91sam9261.dtsi"
> +
> +/ {
> + model = "Atmel at91sam9261ek";
> + compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
> +
> + chosen {
> + bootargs = "mem=64M console=ttyS0,115200";
> + };
> +
> + memory {
> + reg = <0x20000000 0x4000000>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + main_clock: clock@0 {
> + compatible = "atmel,osc", "fixed-clock";
> + clock-frequency = <18432000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + dbgu: serial@...ff200 {
> + status = "okay";
> + };
> +
> + watchdog@...ffd40 {
> + status = "okay";
> + };
> + };
> +
> + nand0: nand@...00000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "soft";
> + nand-on-flash-bbt = <1>;
> + status = "okay";
> + at91bootstrap@0 {
> + label = "at91bootstrap";
> + reg = <0x0 0x20000>;
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + ds8 {
> + label = "ds8";
> + gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "none";
> + };
> + ds7 {
> + label = "ds7";
> + gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "nand-disk";
> + };
> + ds1 {
> + label = "ds1";
> + gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
Didn't you forget the at91sam9261ek entry in arch/arm/boot/dts/Makefile ?
> diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
> index 6276b4c..200d17a 100644
> --- a/arch/arm/mach-at91/at91sam9261.c
> +++ b/arch/arm/mach-at91/at91sam9261.c
> @@ -189,6 +189,21 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_ID("pioA", &pioA_clk),
> CLKDEV_CON_ID("pioB", &pioB_clk),
> CLKDEV_CON_ID("pioC", &pioC_clk),
> + /* more usart lookup table for DT entries */
> + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
> + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
> + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
> + CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
> + /* more tc lookup table for DT entries */
> + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
> + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
> + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
> };
>
It would be great if you could add dt clk support to at91sam9261 SoC :)
(see
https://github.com/at91linux/linux-at91/blob/bbr/at91-3.14-clk/arch/arm/boot/dts/at91sam9x5.dtsi#L87).
But this is antoher story... ;)
> static struct clk_lookup usart_clocks_lookups[] = {
> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
> index b2a3474..2f926d9 100644
> --- a/arch/arm/mach-at91/at91sam9261_devices.c
> +++ b/arch/arm/mach-at91/at91sam9261_devices.c
> @@ -599,8 +599,23 @@ static struct platform_device at91sam9261_tcb_device = {
> .num_resources = ARRAY_SIZE(tcb_resources),
> };
>
> +#if defined(CONFIG_OF)
> +static struct of_device_id tcb_ids[] = {
> + { .compatible = "atmel,at91rm9200-tcb" },
> + { /*sentinel*/ }
> +};
> +#endif
> static void __init at91_add_device_tc(void)
> {
> +#if defined(CONFIG_OF)
> + struct device_node *np;
> +
> + np = of_find_matching_node(NULL, tcb_ids);
> + if (np) {
> + of_node_put(np);
> + return;
> + }
> +#endif
Why do you need this ?
Isn't this already skipped by the following test
(if(of_have_populated_dt())) ?
> platform_device_register(&at91sam9261_tcb_device);
> }
> #else
> @@ -1088,6 +1103,9 @@ void __init at91_add_device_serial(void) {}
> */
> static int __init at91_add_standard_devices(void)
> {
> + if (of_have_populated_dt())
> + return 0;
> +
> at91_add_device_rtt();
> at91_add_device_watchdog();
> at91_add_device_tc();
>
Best Regards,
Boris
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists