linux-kernel - Re: [PATCH] thermal: exynos: handle gate clock for misplaced TRIMINFO register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1388642820.3739.80.camel@rzhang1-mobl4>
Date:	Thu, 02 Jan 2014 14:07:00 +0800
From:	Zhang Rui <rui.zhang@...el.com>
To:	Naveen Krishna Chatradhi <ch.naveen@...sung.com>
Cc:	linux-pm@...r.kernel.org, naveenkrishna.ch@...il.com,
	eduardo.valentin@...com, linux-samsung-soc@...r.kernel.org,
	linux-kernel@...r.kernel.org, amit.daniel@...sung.com,
	kgene.kim@...sung.com, devicetree@...r.kernel.org,
	b.zolnierkie@...sung.com, cpgs@...sung.com
Subject: Re: [PATCH] thermal: exynos: handle gate clock for misplaced
 TRIMINFO register

On Thu, 2013-11-07 at 18:12 +0530, Naveen Krishna Chatradhi wrote:
> On Exynos5420 the TMU(4) for GPU has a seperate clock enable bit from
> the other TMU channels(0 ~ 3). Hence, accessing TRIMINFO for base_second
> should be acompanied by enabling the respective clock.
> 
> This patch which allow for a "clk_sec" clock to be specified in the
> device-tree which will be ungated when accessing the TRIMINFO register.
> 
> Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@...sung.com>

Eduardo,

what do you think of this patch?

thanks,
rui
> ---
>  drivers/thermal/samsung/exynos_tmu.c |   24 +++++++++++++++++++++++-
>  1 file changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index b54825a..33edd1a 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -47,6 +47,7 @@
>   * @irq_work: pointer to the irq work structure.
>   * @lock: lock to implement synchronization.
>   * @clk: pointer to the clock structure.
> + * @clk_sec: pointer to the clock structure for accessing the base_second.
>   * @temp_error1: fused value of the first point trim.
>   * @temp_error2: fused value of the second point trim.
>   * @regulator: pointer to the TMU regulator structure.
> @@ -61,7 +62,7 @@ struct exynos_tmu_data {
>  	enum soc_type soc;
>  	struct work_struct irq_work;
>  	struct mutex lock;
> -	struct clk *clk;
> +	struct clk *clk, *clk_sec;
>  	u8 temp_error1, temp_error2;
>  	struct regulator *regulator;
>  	struct thermal_sensor_conf *reg_conf;
> @@ -152,6 +153,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>  
>  	mutex_lock(&data->lock);
>  	clk_enable(data->clk);
> +	if (!IS_ERR(data->clk_sec))
> +		clk_enable(data->clk_sec);
>  
>  	if (TMU_SUPPORTS(pdata, READY_STATUS)) {
>  		status = readb(data->base + reg->tmu_status);
> @@ -306,6 +309,8 @@ skip_calib_data:
>  out:
>  	clk_disable(data->clk);
>  	mutex_unlock(&data->lock);
> +	if (!IS_ERR(data->clk_sec))
> +		clk_disable(data->clk_sec);
>  
>  	return ret;
>  }
> @@ -457,12 +462,16 @@ static void exynos_tmu_work(struct work_struct *work)
>  	const struct exynos_tmu_registers *reg = pdata->registers;
>  	unsigned int val_irq, val_type;
>  
> +	if (!IS_ERR(data->clk_sec))
> +		clk_enable(data->clk_sec);
>  	/* Find which sensor generated this interrupt */
>  	if (reg->tmu_irqstatus) {
>  		val_type = readl(data->base_second + reg->tmu_irqstatus);
>  		if (!((val_type >> data->id) & 0x1))
>  			goto out;
>  	}
> +	if (!IS_ERR(data->clk_sec))
> +		clk_disable(data->clk_sec);
>  
>  	exynos_report_trigger(data->reg_conf);
>  	mutex_lock(&data->lock);
> @@ -641,6 +650,15 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> +	data->clk_sec = devm_clk_get(&pdev->dev, "tmu_apbif_sec");
> +	if (!IS_ERR(data->clk_sec)) {
> +		ret = clk_prepare(data->clk_sec);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to get clock\n");
> +			return  PTR_ERR(data->clk_sec);
> +		}
> +	}
> +
>  	if (pdata->type == SOC_ARCH_EXYNOS4210 ||
>  	    pdata->type == SOC_ARCH_EXYNOS4412 ||
>  	    pdata->type == SOC_ARCH_EXYNOS5250 ||
> @@ -713,6 +731,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  	return 0;
>  err_clk:
>  	clk_unprepare(data->clk);
> +	if (!IS_ERR(data->clk_sec))
> +		clk_unprepare(data->clk_sec);
>  	return ret;
>  }
>  
> @@ -725,6 +745,8 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>  	exynos_unregister_thermal(data->reg_conf);
>  
>  	clk_unprepare(data->clk);
> +	if (!IS_ERR(data->clk_sec))
> +		clk_unprepare(data->clk_sec);
>  
>  	if (!IS_ERR(data->regulator))
>  		regulator_disable(data->regulator);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/