linux-kernel - [RFC PATCH v1 5/5] ARM: dts: AM43xx-epos-evm: DT entries for ti-usim

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1389010062-17185-6-git-send-email-satish.patel@ti.com>
Date:	Mon, 6 Jan 2014 17:37:42 +0530
From:	Satish Patel <satish.patel@...com>
To:	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-omap@...r.kernel.org>, <devicetree@...r.kernel.org>
CC:	<rob@...dley.net>, <gregkh@...uxfoundation.org>, <arnd@...db.de>
Subject: [RFC PATCH v1 5/5] ARM: dts: AM43xx-epos-evm: DT entries  for ti-usim

Board specific DT entries for TI's USIM - smart card controller of AM43xx
platfrom.These entries are used by USIM driver for various configurations.

Shutdown line of NXP phy is maped to GPIO5. So enabling same to have support
for NXP phy.

Signed-off-by: Satish Patel <satish.patel@...com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts |   30 ++++++++++++++++++++++++++++++
 1 files changed, 30 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f20559b..4ca3460 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -202,6 +202,17 @@
 		>;
 	};
 
+	usim0_default: usim0_default {
+		pinctrl-single,pins = <
+			/* USIM 0 */
+			0x1B4 (SLEWCTRL_FAST | PULL_DISABLE | MUX_MODE8)		/* CLK0  */
+			0x1B0 (SLEWCTRL_FAST | PULL_DISABLE | MUX_MODE8)		/* CLK1  */
+			0x1B8 (SLEWCTRL_FAST | INPUT_EN | PULL_DISABLE | MUX_MODE8)	/* DATA0 */
+			0x1BC (SLEWCTRL_FAST | INPUT_EN | PULL_DISABLE | MUX_MODE8)	/* DATA1 */
+			0x1C8 (SLEWCTRL_FAST | INPUT_EN | PULL_UP | MUX_MODE8)		/* IRQn  */
+			>;
+		};
+
 	spi0_pins: pinmux_spi0_pins {
 		pinctrl-single,pins = <
 			0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
@@ -328,6 +339,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	status = "okay";
+};
+
+
 &dpi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_pinctrl>;
@@ -478,6 +494,14 @@
 	};
 };
 
+&usim0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usim0_default>;
+	phy = <&tda8026>;
+	phy-slots = <1>;
+	status = "okay";
+};
+
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
@@ -490,6 +514,12 @@
 		video-source = <&dpi>;
 		data-lines = <24>;
 	};
+	tda8026: tda8026@48 {
+		compatible = "nxp,tda8026";
+		reg = <0x48>;
+		shutdown-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;   /* Bank5, pin19 */
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+	};
 };
 
 &spi0 {
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/