early console in setup code Probing EDD (edd=off to disable)... ok [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.13.0-rc7-next-20140106-07462-gb4a839b (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-8) ) #455 SMP Mon Jan 6 18:06:09 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c0-0106/next:master/.vmlinuz-b4a839be48406e0e8bdec0bbc86db6f67df3d406-20140106180724-3-xgwo branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-c0-0106/b4a839be48406e0e8bdec0bbc86db6f67df3d406/vmlinuz-3.13.0-rc7-next-20140106-07462-gb4a839b [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdac0-0x000fdacf] mapped at [ffff8800000fdac0] [ 0.000000] mpc: fdad0-fdbec [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x03334000, 0x03334fff] PGTABLE [ 0.000000] BRK [0x03335000, 0x03335fff] PGTABLE [ 0.000000] BRK [0x03336000, 0x03336fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0fa00000-0x0fbfffff] [ 0.000000] [mem 0x0fa00000-0x0fbfffff] page 4k [ 0.000000] BRK [0x03337000, 0x03337fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f9fffff] [ 0.000000] [mem 0x0c000000-0x0f9fffff] page 4k [ 0.000000] BRK [0x03338000, 0x03338fff] PGTABLE [ 0.000000] BRK [0x03339000, 0x03339fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x0bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff] [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x0fd0b000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd930 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 000040 [ 0.000000] ACPI: SSDT 000000000ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at mm/memblock.c:789 __next_free_mem_range+0xc7/0x29c() [ 0.000000] Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-rc7-next-20140106-07462-gb4a839b #455 [ 0.000000] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] 0000000000000009 ffffffff82201d70 ffffffff81986d81 ffffffff82201db8 [ 0.000000] ffffffff82201da8 ffffffff810da9a8 0000000000000000 0000000000000001 [ 0.000000] 0000000000000001 0000000000000001 0000000000000001 ffffffff82201e08 [ 0.000000] Call Trace: [ 0.000000] [] dump_stack+0x85/0xba [ 0.000000] [] warn_slowpath_common+0xa8/0xe0 [ 0.000000] [] warn_slowpath_fmt+0x5c/0x70 [ 0.000000] [] ? vprintk_emit+0x465/0x950 [ 0.000000] [] __next_free_mem_range+0xc7/0x29c [ 0.000000] [] ? early_idt_handlers+0x120/0x120 [ 0.000000] [] ? early_idt_handlers+0x120/0x120 [ 0.000000] [] memblock_find_dma_reserve+0xca/0x163 [ 0.000000] [] setup_arch+0x1086/0x11f9 [ 0.000000] [] ? early_idt_handlers+0x120/0x120 [ 0.000000] [] ? early_idt_handlers+0x120/0x120 [ 0.000000] [] start_kernel+0xe4/0x6fc [ 0.000000] [] ? early_idt_handlers+0x120/0x120 [ 0.000000] [] x86_64_start_reservations+0x46/0x4f [ 0.000000] [] x86_64_start_kernel+0x189/0x19f [ 0.000000] ---[ end trace 8fe5782a70405023 ]--- [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fc8b001, boot clock [ 0.000000] [ffffea0000000000-ffffea00003fffff] PMD -> [ffff88000ee00000-ffff88000f1fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 61438 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000f800000 s79360 r0 d23040 u1048576 [ 0.000000] pcpu-alloc: s79360 r0 d23040 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] kvm-clock: cpu 0, msr 0:fc8b001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr f80cd80 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64391 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c0-0106/next:master/.vmlinuz-b4a839be48406e0e8bdec0bbc86db6f67df3d406-20140106180724-3-xgwo branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-c0-0106/b4a839be48406e0e8bdec0bbc86db6f67df3d406/vmlinuz-3.13.0-rc7-next-20140106-07462-gb4a839b [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 216884K/261744K available (9826K kernel code, 4693K rwdata, 7664K rodata, 1436K init, 11460K bss, 44860K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:512 16 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5823 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2666.792 MHz processor [ 0.006666] Calibrating delay loop (skipped) preset value.. 5335.81 BogoMIPS (lpj=8889306) [ 0.006691] pid_max: default: 32768 minimum: 301 [ 0.009033] Mount-cache hash table entries: 256 [ 0.011237] Initializing cgroup subsys debug [ 0.012050] Initializing cgroup subsys memory [ 0.013429] Initializing cgroup subsys freezer [ 0.014504] mce: CPU supports 10 MCE banks [ 0.015382] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.015382] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.015382] tlb_flushall_shift: 6 [ 0.016754] debug: unmapping init [mem 0xffffffff827fe000-0xffffffff82801fff] [ 0.028182] ACPI: Core revision 20131115 [ 0.031931] ACPI: All ACPI Tables successfully acquired [ 0.033008] ftrace: allocating 24634 entries in 97 pages [ 0.044313] Getting VERSION: 50014 [ 0.046735] Getting VERSION: 50014 [ 0.048259] Getting ID: 0 [ 0.048767] Getting ID: ff000000 [ 0.049400] Getting LVT0: 8700 [ 0.050018] Getting LVT1: 8400 [ 0.050816] enabled ExtINT on CPU#0 [ 0.052732] ENABLING IO-APIC IRQs [ 0.053348] init IO_APIC IRQs [ 0.053917] apic 0 pin 0 not connected [ 0.054643] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.056121] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.056705] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.058174] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.060039] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.063363] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.064838] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.066273] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.066699] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.068163] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.070033] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.071561] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.073371] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.076697] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.078184] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.079666] apic 0 pin 16 not connected [ 0.080005] apic 0 pin 17 not connected [ 0.080729] apic 0 pin 18 not connected [ 0.081453] apic 0 pin 19 not connected [ 0.082171] apic 0 pin 20 not connected [ 0.083342] apic 0 pin 21 not connected [ 0.084083] apic 0 pin 22 not connected [ 0.084799] apic 0 pin 23 not connected [ 0.085684] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086679] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.090416] Using local APIC timer interrupts. [ 0.090416] calibrating APIC timer ... [ 0.093333] ... lapic delta = 6236287 [ 0.093333] ... PM-Timer delta = 357168 [ 0.093333] ... PM-Timer result ok [ 0.093333] ..... delta 6236287 [ 0.093333] ..... mult: 267846513 [ 0.093333] ..... calibration result: 3326019 [ 0.093333] ..... CPU clock speed is 2661.0350 MHz. [ 0.093333] ..... host bus clock speed is 997.3018 MHz. [ 0.093512] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.098047] ftrace: Allocated trace_printk buffers [ 0.117511] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.135877] x86: Booting SMP configuration: [ 0.136674] .... node #0, CPUs: #1 [ 0.117285] kvm-clock: cpu 1, msr 0:fc8b041, secondary cpu clock [ 0.117285] masked ExtINT on CPU#1 [ 0.173447] x86: Booted up 1 node, 2 CPUs [ 0.174294] ---------------- [ 0.174819] | NMI testsuite: [ 0.175344] -------------------- [ 0.176671] remote IPI: [ 0.173395] KVM setup async PF for cpu 1 [ 0.173395] kvm-stealtime: cpu 1, msr f90cd80 ok | [ 0.190283] local IPI: ok | [ 0.200038] -------------------- [ 0.200657] Good, all 2 testcases passed! | [ 0.201439] --------------------------------- [ 0.202212] smpboot: Total of 2 processors activated (10671.63 BogoMIPS) [ 0.227225] devtmpfs: initialized [ 0.228371] gcov: version magic: 0x3430382a [ 0.237102] prandom: seed boundary self test passed [ 0.238657] prandom: 100 self tests passed [ 0.239851] regulator-dummy: no parameters [ 0.240458] NET: Registered protocol family 16 [ 0.242081] cpuidle: using governor ladder [ 0.243340] cpuidle: using governor menu [ 0.266677] ACPI: bus type PCI registered [ 0.267925] PCI: Using configuration type 1 for base access [ 0.280400] ACPI: Added _OSI(Module Device) [ 0.281173] ACPI: Added _OSI(Processor Device) [ 0.282062] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.282902] ACPI: Added _OSI(Processor Aggregator Device) [ 0.291390] ACPI: Interpreter enabled [ 0.292170] ACPI: (supports S0 S5) [ 0.292792] ACPI: Using IOAPIC for interrupt routing [ 0.293387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.305410] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.306528] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.306691] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.308581] PCI host bridge to bus 0000:00 [ 0.310011] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.311038] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.312209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.313345] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.314605] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.315906] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.317454] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.320616] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.324882] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [ 0.327724] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.330063] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.331971] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.333866] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.337842] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.344126] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.354707] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.357665] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.361250] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.363351] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.370619] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.372349] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.374552] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.376673] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.384664] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.387254] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.389688] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 0.398027] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.400556] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.403036] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 0.410661] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.413372] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 0.415496] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 0.423407] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.425745] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 0.427845] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 0.435752] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.437950] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.441074] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 0.449181] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.450628] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [ 0.456358] pci_bus 0000:00: on NUMA node 0 [ 0.457584] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.459082] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.461009] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.463403] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.464653] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.466513] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.467488] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.468972] vgaarb: loaded [ 0.470005] vgaarb: bridge control possible 0000:00:02.0 [ 0.473661] ACPI: bus type USB registered [ 0.475065] usbcore: registered new interface driver usbfs [ 0.476711] usbcore: registered new interface driver hub [ 0.480043] usbcore: registered new device driver usb [ 0.483650] Linux video capture interface: v2.00 [ 0.484511] pps_core: LinuxPPS API ver. 1 registered [ 0.485398] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.486681] PTP clock support registered [ 0.488011] Advanced Linux Sound Architecture Driver Initialized. [ 0.489096] PCI: Using ACPI for IRQ routing [ 0.490009] PCI: pci_cache_line_size set to 64 bytes [ 0.491605] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.492804] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.495589] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.507719] Switched to clocksource kvm-clock [ 0.509634] Warning: could not register annotated branches stats [ 0.550199] FS-Cache: Loaded [ 0.550909] pnp: PnP ACPI init [ 0.551509] ACPI: bus type PNP registered [ 0.552441] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.553961] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.555280] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.556751] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.557923] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.559446] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.561124] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.562589] pnp 00:03: [dma 2] [ 0.563210] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.564648] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.566174] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.567446] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.568933] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.570454] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.571862] pnp: PnP ACPI: found 7 devices [ 0.572994] ACPI: bus type PNP unregistered [ 0.579891] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.580943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.581923] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.583091] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.584342] NET: Registered protocol family 1 [ 0.585214] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.586304] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.587406] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.588570] pci 0000:00:02.0: Boot video device [ 0.589530] PCI: CLS 0 bytes, default 64 [ 0.590780] Unpacking initramfs... [ 0.921463] debug: unmapping init [mem 0xffff88000fd0b000-0xffff88000ffeffff] [ 0.924217] Machine check injector initialized [ 0.925799] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 0.926867] microcode: CPU1 sig=0xf61, pf=0x1, revision=0x1 [ 0.927993] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.942380] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 0.944041] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 0.947073] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 0.948955] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 0.950072] PCLMULQDQ-NI instructions are not detected. [ 0.951006] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 0.952137] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 0.953495] AVX or AES-NI instructions are not detected. [ 0.954533] AVX instructions are not detected. [ 0.955348] AVX instructions are not detected. [ 0.956161] AVX2 or AES-NI instructions are not detected. [ 0.957245] AVX2 instructions are not detected. [ 1.503024] fuse init (API version 7.22) [ 1.930835] tsc: Refined TSC clocksource calibration: 2666.707 MHz [ 9.003436] alg: No test for crc32 (crc32-table) [ 9.833403] alg: No test for lz4 (lz4-generic) [ 10.113399] alg: No test for lz4hc (lz4hc-generic) [ 10.253400] alg: No test for stdrng (krng) [ 10.462213] Key type asymmetric registered [ 10.479279] xz_dec_test: module loaded [ 10.479987] xz_dec_test: Create a device node with 'mknod xz_dec_test c 250 0' and write .xz files to it. [ 10.482209] ipmi message handler version 39.2 [ 10.493126] ipmi device interface [ 10.493881] IPMI System Interface driver. [ 10.494729] ipmi_si: Adding default-specified kcs state machine [ 10.495811] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 10.497671] ipmi_si: Interface detection failed [ 11.278610] ipmi_si: Adding default-specified smic state machine [ 11.279765] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 11.286788] ipmi_si: Interface detection failed [ 11.300162] ipmi_si: Adding default-specified bt state machine [ 11.301257] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 11.303036] ipmi_si: Interface detection failed [ 11.313608] ipmi_si: Unable to find any System Interface(s) [ 11.314626] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 11.316270] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 11.317656] ACPI: Power Button [PWRF] [ 11.322570] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 11.323569] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 11.374277] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 11.377122] Initializing Nozomi driver 2.1d [ 11.378197] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 11.379472] ac.o: No PCI boards found. [ 11.380178] ac.o: For an ISA board you must supply memory and irq parameters. [ 11.392457] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 11.393495] smapi::smapi_init, ERROR invalid usSmapiID [ 11.394411] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 11.396055] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 11.397362] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 11.398488] Linux agpgart interface v0.103 [ 11.399574] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 11.401201] Hangcheck: Using getrawmonotonic(). [ 11.402210] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 11.413549] dummy-irq: no IRQ given. Use irq=N [ 11.414435] Phantom Linux Driver, version n0.9.8, init OK [ 11.415551] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 11.417000] c2port c2port0: C2 port uc added [ 11.417773] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 11.419513] mic_init not running on X100 ret -19 [ 11.443708] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.444934] ohci-platform: OHCI generic platform driver [ 11.446057] driver u132_hcd [ 11.452718] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 11.453828] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 11.455514] usbcore: registered new interface driver cdc_wdm [ 11.456546] usbcore: registered new interface driver usbtmc [ 11.457623] usbcore: registered new interface driver cypress_cy7c63 [ 11.458759] usbcore: registered new interface driver emi26 - firmware loader [ 11.460041] usbcore: registered new interface driver emi62 - firmware loader [ 11.461300] driver ftdi-elan [ 11.483042] usbcore: registered new interface driver ftdi-elan [ 11.484192] usbcore: registered new interface driver idmouse [ 11.485253] usbcore: registered new interface driver iowarrior [ 11.486316] usbcore: registered new interface driver ldusb [ 11.487340] usbcore: registered new interface driver usbled [ 11.488354] usbcore: registered new interface driver legousbtower [ 11.499657] usbcore: registered new interface driver usbtest [ 11.501773] usbcore: registered new interface driver usb_ehset_test [ 11.505944] usbcore: registered new interface driver trancevibrator [ 11.507108] usbcore: registered new interface driver usbsevseg [ 11.508206] usbcore: registered new interface driver yurex [ 11.511477] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 11.518154] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.519087] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.665913] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 11.668068] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 11.670110] usbcore: registered new interface driver usb_acecad [ 11.671187] usbcore: registered new interface driver aiptek [ 11.672197] usbcore: registered new interface driver gtco [ 11.673176] usbcore: registered new interface driver hanwang [ 11.674763] mk712: device not present [ 11.675584] usbcore: registered new interface driver sur40 [ 11.676731] I2O subsystem v1.325 [ 11.677316] i2o: max drivers = 8 [ 11.678206] I2O Configuration OSM v1.323 [ 11.678930] I2O Bus Adapter OSM v1.317 [ 11.679655] I2O ProcFS OSM v1.316 [ 11.680874] usbcore: registered new interface driver radioshark2 [ 11.681950] usbcore: registered new interface driver dsbr100 [ 11.682670] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 11.685316] usbcore: registered new interface driver radio-si470x [ 11.686409] usbcore: registered new interface driver radio-mr800 [ 11.687547] usbcore: registered new interface driver radio-keene [ 11.688619] pps_ldisc: PPS line discipline registered [ 11.689544] Driver for 1-wire Dallas network protocol. [ 11.690651] usbcore: registered new interface driver DS9490R [ 11.692864] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 11.694333] usbcore: registered new interface driver pcwd_usb [ 11.695363] acquirewdt: WDT driver for Acquire single board computer initialising [ 11.696878] acquirewdt: I/O address 0x0043 already in use [ 11.697859] acquirewdt: probe of acquirewdt failed with error -5 [ 11.698932] advantechwdt: WDT driver for Advantech single board computer initialising [ 11.700534] advantechwdt: initialized. timeout=60 sec (nowayout=0) [ 11.701642] ib700wdt: WDT driver for IB700 single board computer initialising [ 11.703012] ib700wdt: START method I/O 443 is not available [ 11.704036] ib700wdt: probe of ib700wdt failed with error -5 [ 11.705074] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 11.706475] wafer5823wdt: I/O address 0x0443 already in use [ 11.707529] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 11.708796] i6300esb: cannot register miscdev on minor=130 (err=-16) [ 11.710044] i6300ESB timer: probe of 0000:00:0a.0 failed with error -16 [ 11.711223] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 11.712224] iTCO_vendor_support: vendor-support=0 [ 11.713170] it87_wdt: no device [ 11.713771] sc1200wdt: build 20020303 [ 11.714509] sc1200wdt: io parameter must be specified [ 11.715425] pc87413_wdt: Version 1.1 at io 0x2E [ 11.716232] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 11.717441] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 11.718512] sbc60xxwdt: I/O address 0x0443 already in use [ 11.719480] cpu5wdt: misc_register failed [ 11.720298] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 11.725448] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 11.726594] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 11.727737] w83697hf_wdt: watchdog not found at address 0x2e [ 11.728738] w83697hf_wdt: No W83697HF/HG could be found [ 11.729664] w83877f_wdt: I/O address 0x0443 already in use [ 11.730668] w83977f_wdt: driver v1.00 [ 11.731328] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 11.742540] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 11.743655] machzwd: no ZF-Logic found [ 11.744330] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 11.745544] sdhci: Secure Digital Host Controller Interface driver [ 11.746627] sdhci: Copyright(c) Pierre Ossman [ 11.747512] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 11.748557] wbsd: Copyright(c) Pierre Ossman [ 11.749454] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 11.773169] usbcore: registered new interface driver vub300 [ 11.774334] usbcore: registered new interface driver ushc [ 11.775418] leds_ss4200: no LED devices found [ 11.776254] ledtrig-cpu: registered to indicate activity on CPUs [ 11.777881] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 11.779273] hidraw: raw HID events driver (C) Jiri Kosina [ 11.781489] usbcore: registered new interface driver usbmouse [ 11.792649] usbcore: registered new interface driver sdr_msi3101 [ 11.793815] usbcore: registered new interface driver line6usb [ 11.794841] vme_user: VME User Space Access Driver [ 11.795691] vme_user: No cards, skipping registration [ 11.796584] vme_pio2: No cards, skipping registration [ 11.842713] usbcore: registered new interface driver cedusb [ 11.862114] dgap: dgap-1.3-16, Digi International Part Number 40002347_C [ 11.863424] dgap: For the tools package or updated drivers please visit http://www.digi.com [ 11.865326] hdaps: supported laptop not found! [ 11.866112] hdaps: driver init failed (ret=-19)! [ 11.868137] intel_rapl: driver does not support CPU family 15 model 6 [ 11.876597] Motu MidiTimePiece on parallel port irq: 7 ioport: 0x378 [ 11.889526] usbcore: registered new interface driver snd-usb-6fire [ 11.890682] usbcore: registered new interface driver snd-usb-hiface [ 11.895432] oprofile: using NMI interrupt. [ 11.896819] [ 11.896819] printing PIC contents [ 11.897704] ... PIC IMR: ffff [ 11.898267] ... PIC IRR: 1013 [ 11.898834] ... PIC ISR: 0000 [ 11.899392] ... PIC ELCR: 0c00 [ 11.899967] printing local APIC contents on CPU#0/0: [ 11.900010] ... APIC ID: 00000000 (0) [ 11.900010] ... APIC VERSION: 00050014 [ 11.900010] ... APIC TASKPRI: 00000000 (00) [ 11.900010] ... APIC PROCPRI: 00000000 [ 11.900010] ... APIC LDR: 01000000 [ 11.900010] ... APIC DFR: ffffffff [ 11.900010] ... APIC SPIV: 000001ff [ 11.900010] ... APIC ISR field: [ 11.900010] 0000000000000000000000000000000000000000000000000000000000000000 [ 11.900010] ... APIC TMR field: [ 11.900010] 0000000002000000000000000000000000000000000000000000000000000000 [ 11.900010] ... APIC IRR field: [ 11.900010] 0000000000000000000000000000000000000000000000000000000000008000 [ 11.900010] ... APIC ESR: 00000000 [ 11.900010] ... APIC ICR: 000008fd [ 11.900010] ... APIC ICR2: 02000000 [ 11.900010] ... APIC LVTT: 000000ef [ 11.900010] ... APIC LVTPC: 00010000 [ 11.900010] ... APIC LVT0: 00010700 [ 11.900010] ... APIC LVT1: 00000400 [ 11.900010] ... APIC LVTERR: 000000fe [ 11.900010] ... APIC TMICT: 000327eb [ 11.900010] ... APIC TMCCT: 00000000 [ 11.900010] ... APIC TDCR: 00000003 [ 11.900010] [ 11.921626] number of MP IRQ sources: 15. [ 11.922823] number of IO-APIC #0 registers: 24. [ 11.923660] testing the IO APIC....................... [ 11.924602] IO APIC #0...... [ 11.925132] .... register #00: 00000000 [ 11.925825] ....... : physical APIC id: 00 [ 11.926602] ....... : Delivery Type: 0 [ 11.927346] ....... : LTS : 0 [ 11.928058] .... register #01: 00170011 [ 11.928750] ....... : max redirection entries: 17 [ 11.929873] ....... : PRQ implemented: 0 [ 11.931330] ....... : IO APIC version: 11 [ 11.932104] .... register #02: 00000000 [ 11.932841] ....... : arbitration: 00 [ 11.933582] .... IRQ redirection table: [ 11.934290] 1 0 0 0 0 0 0 00 [ 11.935102] 0 0 0 0 0 1 1 31 [ 11.935944] 0 0 0 0 0 1 1 30 [ 11.936790] 0 0 0 0 0 1 1 33 [ 11.937612] 1 0 0 0 0 1 1 34 [ 11.938440] 1 1 0 0 0 1 1 35 [ 11.939261] 0 0 0 0 0 1 1 36 [ 11.940112] 0 0 0 0 0 1 1 37 [ 11.940933] 0 0 0 0 0 1 1 38 [ 11.941754] 0 1 0 0 0 1 1 39 [ 11.943143] 1 1 0 0 0 1 1 3A [ 11.945362] 1 1 0 0 0 1 1 3B [ 11.946184] 0 0 0 0 0 1 1 3C [ 11.947037] 0 0 0 0 0 1 1 3D [ 11.947865] 0 0 0 0 0 1 1 3E [ 11.948689] 0 0 0 0 0 1 1 3F [ 11.949509] 1 0 0 0 0 0 0 00 [ 11.950379] 1 0 0 0 0 0 0 00 [ 11.951195] 1 0 0 0 0 0 0 00 [ 11.952015] 1 0 0 0 0 0 0 00 [ 11.953055] 1 0 0 0 0 0 0 00 [ 11.953907] 1 0 0 0 0 0 0 00 [ 11.954733] 1 0 0 0 0 0 0 00 [ 11.955566] 1 0 0 0 0 0 0 00 [ 11.956371] IRQ to pin mappings: [ 11.956984] IRQ0 -> 0:2 [ 11.957491] IRQ1 -> 0:1 [ 11.957988] IRQ3 -> 0:3 [ 11.958493] IRQ4 -> 0:4 [ 11.958991] IRQ5 -> 0:5 [ 11.959494] IRQ6 -> 0:6 [ 11.959992] IRQ7 -> 0:7 [ 11.960523] IRQ8 -> 0:8 [ 11.961021] IRQ9 -> 0:9 [ 11.961527] IRQ10 -> 0:10 [ 11.962054] IRQ11 -> 0:11 [ 11.963079] IRQ12 -> 0:12 [ 11.963656] IRQ13 -> 0:13 [ 11.964184] IRQ14 -> 0:14 [ 11.964728] IRQ15 -> 0:15 [ 11.965254] .................................... done. [ 11.983944] Key type trusted registered [ 11.986142] Key type encrypted registered [ 11.988136] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 11.990680] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 11.992185] ALSA device list: [ 11.992818] #0: Dummy 1 [ 11.993310] #1: Loopback 1 [ 12.001379] #2: Virtual MIDI Card 1 [ 12.002045] #3: MTPAV on parallel port at 0x378 [ 12.004204] debug: unmapping init [mem 0xffffffff82697000-0xffffffff827fdfff] [ 12.012901] Write protecting the kernel read-only data: 18432k [ 12.015500] debug: unmapping init [mem 0xffff8800019aa000-0xffff8800019fffff] [ 12.017263] debug: unmapping init [mem 0xffff88000217c000-0xffff8800021fffff] mount: mounting proc on /proc failed: No such device /etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found Please wait: booting... mount: mounting proc on /proc failed: No such device grep: /proc/filesystems: No such file or directory Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. mount: can't read '/proc/mounts': No such file or directory /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 172: can't open /proc/cmdline: no such file grep: /proc/filesystems: No such file or directory Configuring network interfaces... ifconfig: socket: Address family not supported by protocol ifup: can't open '/var/run/ifstate': No such file or directory done. hwclock: can't open '/dev/misc/rtc': No such file or directory Running postinst /etc/rpm-postinsts/100... mount: no /proc/mounts wfg: skip syslogd Kernel tests: Boot OK! Kernel tests: Boot OK! mount: mounting proc on /proc failed: No such device /etc/rc5.d/S99-rc.local: line 19: can't create /proc/177/oom_score_adj: nonexistent directory sed: /lib/modules/3.13.0-rc7-next-20140106-07462-gb4a839b/modules.dep: No such file or directory xargs: modprobe: No such file or directory run-parts: /etc/kernel-tests/01-modprobe exited with code 127 grep: /proc/cmdline: No such file or directory grep: /proc/cmdline: No such file or directory /etc/kernel-tests/90-trinity: line 15: /trinity: not found /etc/kernel-tests/90-trinity: line 16: /trinity: not found /etc/kernel-tests/90-trinity: line 18: /usr/sbin/chroot: not found /etc/kernel-tests/90-trinity: line 17: /usr/sbin/chroot: not found [ 49.316686] [sched_delayed] sched: RT throttling activated lsmod: can't open '/proc/modules': No such file or directory BusyBox v1.19.4 (2012-04-22 08:49:11 PDT) multi-call binary. Usage: rmmod [-wfa] [MODULE]... lsmod: can't open '/proc/modules': No such file or directory BusyBox v1.19.4 (2012-04-22 08:49:11 PDT) multi-call binary. Usage: rmmod [-wfa] [MODULE]... lsmod: can't open '/proc/modules': No such file or directory BusyBox v1.19.4 (2012-04-22 08:49:11 PDT) multi-call binary. Usage: rmmod [-wfa] [MODULE]... run-parts: /etc/kernel-tests/99-rmmod exited with code 123 shutdown: warning: cannot open /var/run/shutdown.pid mount: no /proc/mounts wfg: skip syslogd sed: /proc/mounts: No such file or directory sed: /proc/mounts: No such file or directory sed: /proc/mounts: No such file or directory Deconfiguring network interfaces... ifdown: interface lo not configured done. Sending all processes the TERM signal... mount: mounting proc on /proc failed: No such device killall5[225]: mount returned non-zero exit status killall5[225]: /proc not mounted, failed to mount. Sending all processes the KILL signal... mount: mounting proc on /proc failed: No such device killall5[228]: mount returned non-zero exit status killall5[228]: /proc not mounted, failed to mount. Unmounting remote filesystems... Deactivating swap... Unmounting local filesystems... grep: /proc/mounts: No such file or directory mount: can't read '/proc/mounts': No such file or directory Rebooting... [ 81.815164] Unregister pv shared memory for cpu 1 [ 81.816505] Unregister pv shared memory for cpu 0 [ 81.821354] reboot: Restarting system [ 81.822121] reboot: machine restart Elapsed time: 85 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-c0-0106/b4a839be48406e0e8bdec0bbc86db6f67df3d406/vmlinuz-3.13.0-rc7-next-20140106-07462-gb4a839b -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c0-0106/next:master/.vmlinuz-b4a839be48406e0e8bdec0bbc86db6f67df3d406-20140106180724-3-xgwo branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-c0-0106/b4a839be48406e0e8bdec0bbc86db6f67df3d406/vmlinuz-3.13.0-rc7-next-20140106-07462-gb4a839b' -initrd /kernel-tests/initrd/yocto-minimal-x86_64.cgz -m 256M -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::18723-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/LABEL=KVM/disk0-yocto-xgwo-5,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk1-yocto-xgwo-5,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk2-yocto-xgwo-5,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk3-yocto-xgwo-5,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk4-yocto-xgwo-5,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk5-yocto-xgwo-5,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-yocto-xgwo-5 -serial file:/dev/shm/kboot/serial-yocto-xgwo-5 -daemonize -display none -monitor null