| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1388986699-6470-1-git-send-email-21cnbao@gmail.com>
Date: Mon, 6 Jan 2014 13:38:19 +0800
From: Barry Song <21cnbao@...il.com>
To: mturquette@...aro.org, linux-kernel@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, workgroup.linux@....com,
Barry Song <Baohua.Song@....com>,
Rongjun Ying <Rongjun.Ying@....com>
Subject: [PATCH v2] clk: sirf: re-arch to make the codes support both prima2 and atlas6
From: Barry Song <Baohua.Song@....com>
sirfprima2 and sirfatlas6 are two different SoCs in CSR SiRF series. for
prima2 and atlas6, there are many shared clocks but there are still
some different register layout and hardware clocks, then result in
different clock table.
here we re-arch the driver to
1. clk-common.c provides common clocks for prima2 and atlas6,
2. clk-prima2.h describles registers of prima2 and clk-prima2.c provides
prima2 specific clocks and clock table.
3. clk-atlas6.h describles registers of atlas6 and clk-atlas6.c provides
atlas6 specific clocks and clock table.
4. clk.h and clk.c expose external interfaces and provide uniform entry
for both prima2 and atlas6.
so both prima2 and atlas6 will get support by drivers/clk/sirf.
Signed-off-by: Barry Song <Baohua.Song@....com>
Signed-off-by: Rongjun Ying <Rongjun.Ying@....com>
---
-v2:
rebase to 3.13-rc;
use CLK_OF_DECLARE and make init function static
drivers/clk/Makefile | 2 +-
drivers/clk/sirf/atlas6.h | 31 +++
drivers/clk/sirf/clk-atlas6.c | 153 +++++++++++++
drivers/clk/{clk-prima2.c => sirf/clk-common.c} | 264 ++++++++---------------
drivers/clk/sirf/clk-prima2.c | 152 +++++++++++++
drivers/clk/sirf/prima2.h | 25 +++
6 files changed, 455 insertions(+), 172 deletions(-)
create mode 100644 drivers/clk/sirf/atlas6.h
create mode 100644 drivers/clk/sirf/clk-atlas6.c
rename drivers/clk/{clk-prima2.c => sirf/clk-common.c} (82%)
create mode 100644 drivers/clk/sirf/clk-prima2.c
create mode 100644 drivers/clk/sirf/prima2.h
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 7a10bc9..aa2bd0f 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
-obj-$(CONFIG_ARCH_SIRF) += clk-prima2.o
obj-$(CONFIG_PLAT_ORION) += mvebu/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
@@ -30,6 +29,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
+obj-$(CONFIG_ARCH_SIRF) += sirf/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
diff --git a/drivers/clk/sirf/atlas6.h b/drivers/clk/sirf/atlas6.h
new file mode 100644
index 0000000..376217f
--- /dev/null
+++ b/drivers/clk/sirf/atlas6.h
@@ -0,0 +1,31 @@
+#define SIRFSOC_CLKC_CLK_EN0 0x0000
+#define SIRFSOC_CLKC_CLK_EN1 0x0004
+#define SIRFSOC_CLKC_REF_CFG 0x0020
+#define SIRFSOC_CLKC_CPU_CFG 0x0024
+#define SIRFSOC_CLKC_MEM_CFG 0x0028
+#define SIRFSOC_CLKC_MEMDIV_CFG 0x002C
+#define SIRFSOC_CLKC_SYS_CFG 0x0030
+#define SIRFSOC_CLKC_IO_CFG 0x0034
+#define SIRFSOC_CLKC_DSP_CFG 0x0038
+#define SIRFSOC_CLKC_GFX_CFG 0x003c
+#define SIRFSOC_CLKC_MM_CFG 0x0040
+#define SIRFSOC_CLKC_GFX2D_CFG 0x0040
+#define SIRFSOC_CLKC_LCD_CFG 0x0044
+#define SIRFSOC_CLKC_MMC01_CFG 0x0048
+#define SIRFSOC_CLKC_MMC23_CFG 0x004C
+#define SIRFSOC_CLKC_MMC45_CFG 0x0050
+#define SIRFSOC_CLKC_NAND_CFG 0x0054
+#define SIRFSOC_CLKC_NANDDIV_CFG 0x0058
+#define SIRFSOC_CLKC_PLL1_CFG0 0x0080
+#define SIRFSOC_CLKC_PLL2_CFG0 0x0084
+#define SIRFSOC_CLKC_PLL3_CFG0 0x0088
+#define SIRFSOC_CLKC_PLL1_CFG1 0x008c
+#define SIRFSOC_CLKC_PLL2_CFG1 0x0090
+#define SIRFSOC_CLKC_PLL3_CFG1 0x0094
+#define SIRFSOC_CLKC_PLL1_CFG2 0x0098
+#define SIRFSOC_CLKC_PLL2_CFG2 0x009c
+#define SIRFSOC_CLKC_PLL3_CFG2 0x00A0
+#define SIRFSOC_USBPHY_PLL_CTRL 0x0008
+#define SIRFSOC_USBPHY_PLL_POWERDOWN BIT(1)
+#define SIRFSOC_USBPHY_PLL_BYPASS BIT(2)
+#define SIRFSOC_USBPHY_PLL_LOCK BIT(3)
diff --git a/drivers/clk/sirf/clk-atlas6.c b/drivers/clk/sirf/clk-atlas6.c
new file mode 100644
index 0000000..21e776a
--- /dev/null
+++ b/drivers/clk/sirf/clk-atlas6.c
@@ -0,0 +1,153 @@
+/*
+ * Clock tree for CSR SiRFatlasVI
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "atlas6.h"
+#include "clk-common.c"
+
+static struct clk_dmn clk_mmc01 = {
+ .regofs = SIRFSOC_CLKC_MMC01_CFG,
+ .enable_bit = 59,
+ .hw = {
+ .init = &clk_mmc01_init,
+ },
+};
+
+static struct clk_dmn clk_mmc23 = {
+ .regofs = SIRFSOC_CLKC_MMC23_CFG,
+ .enable_bit = 60,
+ .hw = {
+ .init = &clk_mmc23_init,
+ },
+};
+
+static struct clk_dmn clk_mmc45 = {
+ .regofs = SIRFSOC_CLKC_MMC45_CFG,
+ .enable_bit = 61,
+ .hw = {
+ .init = &clk_mmc45_init,
+ },
+};
+
+static struct clk_init_data clk_nand_init = {
+ .name = "nand",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_nand = {
+ .regofs = SIRFSOC_CLKC_NAND_CFG,
+ .enable_bit = 34,
+ .hw = {
+ .init = &clk_nand_init,
+ },
+};
+
+enum atlas6_clk_index {
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps,
+ mf, io, cpu, uart0, uart1, uart2, tsc, i2c0, i2c1, spi0,
+ spi1, pwmc, efuse, pulse, dmac0, dmac1, nand, audio, usp0, usp1,
+ usp2, vip, gfx, gfx2d, lcd, vpp, mmc01, mmc23, mmc45, usbpll,
+ usb0, usb1, cphif, maxclk,
+};
+
+static __initdata struct clk_hw *atlas6_clk_hw_array[maxclk] = {
+ NULL, /* dummy */
+ NULL,
+ &clk_pll1.hw,
+ &clk_pll2.hw,
+ &clk_pll3.hw,
+ &clk_mem.hw,
+ &clk_sys.hw,
+ &clk_security.hw,
+ &clk_dsp.hw,
+ &clk_gps.hw,
+ &clk_mf.hw,
+ &clk_io.hw,
+ &clk_cpu.hw,
+ &clk_uart0.hw,
+ &clk_uart1.hw,
+ &clk_uart2.hw,
+ &clk_tsc.hw,
+ &clk_i2c0.hw,
+ &clk_i2c1.hw,
+ &clk_spi0.hw,
+ &clk_spi1.hw,
+ &clk_pwmc.hw,
+ &clk_efuse.hw,
+ &clk_pulse.hw,
+ &clk_dmac0.hw,
+ &clk_dmac1.hw,
+ &clk_nand.hw,
+ &clk_audio.hw,
+ &clk_usp0.hw,
+ &clk_usp1.hw,
+ &clk_usp2.hw,
+ &clk_vip.hw,
+ &clk_gfx.hw,
+ &clk_gfx2d.hw,
+ &clk_lcd.hw,
+ &clk_vpp.hw,
+ &clk_mmc01.hw,
+ &clk_mmc23.hw,
+ &clk_mmc45.hw,
+ &usb_pll_clk_hw,
+ &clk_usb0.hw,
+ &clk_usb1.hw,
+ &clk_cphif.hw,
+};
+
+static struct clk *atlas6_clks[maxclk];
+
+static void __init atlas6_clk_init(struct device_node *np)
+{
+ struct device_node *rscnp;
+ int i;
+
+ rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
+ sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
+ if (!sirfsoc_rsc_vbase)
+ panic("unable to map rsc registers\n");
+ of_node_put(rscnp);
+
+ sirfsoc_clk_vbase = of_iomap(np, 0);
+ if (!sirfsoc_clk_vbase)
+ panic("unable to map clkc registers\n");
+
+ /* These are always available (RTC and 26MHz OSC)*/
+ atlas6_clks[rtc] = clk_register_fixed_rate(NULL, "rtc", NULL,
+ CLK_IS_ROOT, 32768);
+ atlas6_clks[osc] = clk_register_fixed_rate(NULL, "osc", NULL,
+ CLK_IS_ROOT, 26000000);
+
+ for (i = pll1; i < maxclk; i++) {
+ atlas6_clks[i] = clk_register(NULL, atlas6_clk_hw_array[i]);
+ BUG_ON(!atlas6_clks[i]);
+ }
+ clk_register_clkdev(atlas6_clks[cpu], NULL, "cpu");
+ clk_register_clkdev(atlas6_clks[io], NULL, "io");
+ clk_register_clkdev(atlas6_clks[mem], NULL, "mem");
+ clk_register_clkdev(atlas6_clks[mem], NULL, "osc");
+
+ clk_data.clks = atlas6_clks;
+ clk_data.clk_num = maxclk;
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(atlas6_clk, "sirf,atlas6-clkc", atlas6_clk_init);
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/sirf/clk-common.c
similarity index 82%
rename from drivers/clk/clk-prima2.c
rename to drivers/clk/sirf/clk-common.c
index 6c15e33..88bc999 100644
--- a/drivers/clk/clk-prima2.c
+++ b/drivers/clk/sirf/clk-common.c
@@ -1,51 +1,18 @@
/*
- * Clock tree for CSR SiRFprimaII
+ * common clks module for all SiRF SoCs
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/syscore_ops.h>
-
-#define SIRFSOC_CLKC_CLK_EN0 0x0000
-#define SIRFSOC_CLKC_CLK_EN1 0x0004
-#define SIRFSOC_CLKC_REF_CFG 0x0014
-#define SIRFSOC_CLKC_CPU_CFG 0x0018
-#define SIRFSOC_CLKC_MEM_CFG 0x001c
-#define SIRFSOC_CLKC_SYS_CFG 0x0020
-#define SIRFSOC_CLKC_IO_CFG 0x0024
-#define SIRFSOC_CLKC_DSP_CFG 0x0028
-#define SIRFSOC_CLKC_GFX_CFG 0x002c
-#define SIRFSOC_CLKC_MM_CFG 0x0030
-#define SIRFSOC_CLKC_LCD_CFG 0x0034
-#define SIRFSOC_CLKC_MMC_CFG 0x0038
-#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
-#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
-#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
-#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
-#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
-#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
-#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
-#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
-#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
-#define SIRFSOC_USBPHY_PLL_CTRL 0x0008
-#define SIRFSOC_USBPHY_PLL_POWERDOWN BIT(1)
-#define SIRFSOC_USBPHY_PLL_BYPASS BIT(2)
-#define SIRFSOC_USBPHY_PLL_LOCK BIT(3)
-
-static void *sirfsoc_clk_vbase, *sirfsoc_rsc_vbase;
-
#define KHZ 1000
#define MHZ (KHZ * KHZ)
+static void *sirfsoc_clk_vbase;
+static void *sirfsoc_rsc_vbase;
+static struct clk_onecell_data clk_data;
+
/*
* SiRFprimaII clock controller
* - 2 oscillators: osc-26MHz, rtc-32.768KHz
@@ -127,6 +94,7 @@ static long pll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
unsigned long fin, nf, nr, od;
+ u64 dividend;
/*
* fout = fin * nf / (nr * od);
@@ -147,7 +115,10 @@ static long pll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
nr = BIT(6);
od = 1;
- return fin * nf / (nr * od);
+ dividend = (u64)fin * nf;
+ do_div(dividend, nr * od);
+
+ return (long)dividend;
}
static int pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -186,6 +157,30 @@ static int pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
+static long cpu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ /*
+ * SiRF SoC has not cpu clock control,
+ * So bypass to it's parent pll.
+ */
+ struct clk *parent_clk = clk_get_parent(hw->clk);
+ struct clk *pll_parent_clk = clk_get_parent(parent_clk);
+ unsigned long pll_parent_rate = clk_get_rate(pll_parent_clk);
+ return pll_clk_round_rate(parent_clk->hw, rate, &pll_parent_rate);
+}
+
+static unsigned long cpu_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ /*
+ * SiRF SoC has not cpu clock control,
+ * So return the parent pll rate.
+ */
+ struct clk *parent_clk = clk_get_parent(hw->clk);
+ return parent_clk->rate;
+}
+
static struct clk_ops std_pll_ops = {
.recalc_rate = pll_clk_recalc_rate,
.round_rate = pll_clk_round_rate,
@@ -403,6 +398,42 @@ static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
+static int cpu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int ret1, ret2;
+ struct clk *cur_parent;
+
+ if (rate == clk_get_rate(clk_pll1.hw.clk)) {
+ ret1 = clk_set_parent(hw->clk, clk_pll1.hw.clk);
+ return ret1;
+ }
+
+ if (rate == clk_get_rate(clk_pll2.hw.clk)) {
+ ret1 = clk_set_parent(hw->clk, clk_pll2.hw.clk);
+ return ret1;
+ }
+
+ if (rate == clk_get_rate(clk_pll3.hw.clk)) {
+ ret1 = clk_set_parent(hw->clk, clk_pll3.hw.clk);
+ return ret1;
+ }
+
+ cur_parent = clk_get_parent(hw->clk);
+
+ /* switch to tmp pll before setting parent clock's rate */
+ if (cur_parent == clk_pll1.hw.clk) {
+ ret1 = clk_set_parent(hw->clk, clk_pll2.hw.clk);
+ BUG_ON(ret1);
+ }
+
+ ret2 = clk_set_rate(clk_pll1.hw.clk, rate);
+
+ ret1 = clk_set_parent(hw->clk, clk_pll1.hw.clk);
+
+ return ret2 ? ret2 : ret1;
+}
+
static struct clk_ops msi_ops = {
.set_rate = dmn_clk_set_rate,
.round_rate = dmn_clk_round_rate,
@@ -457,6 +488,9 @@ static struct clk_dmn clk_io = {
static struct clk_ops cpu_ops = {
.set_parent = dmn_clk_set_parent,
.get_parent = dmn_clk_get_parent,
+ .set_rate = cpu_clk_set_rate,
+ .round_rate = cpu_clk_round_rate,
+ .recalc_rate = cpu_clk_recalc_rate,
};
static struct clk_init_data clk_cpu_init = {
@@ -532,6 +566,11 @@ static struct clk_dmn clk_mm = {
},
};
+/*
+ * for atlas6, gfx2d holds the bit of prima2's clk_mm
+ */
+#define clk_gfx2d clk_mm
+
static struct clk_init_data clk_lcd_init = {
.name = "lcd",
.ops = &dmn_ops,
@@ -569,14 +608,6 @@ static struct clk_init_data clk_mmc01_init = {
.num_parents = ARRAY_SIZE(dmn_clk_parents),
};
-static struct clk_dmn clk_mmc01 = {
- .regofs = SIRFSOC_CLKC_MMC_CFG,
- .enable_bit = 59,
- .hw = {
- .init = &clk_mmc01_init,
- },
-};
-
static struct clk_init_data clk_mmc23_init = {
.name = "mmc23",
.ops = &dmn_ops,
@@ -584,14 +615,6 @@ static struct clk_init_data clk_mmc23_init = {
.num_parents = ARRAY_SIZE(dmn_clk_parents),
};
-static struct clk_dmn clk_mmc23 = {
- .regofs = SIRFSOC_CLKC_MMC_CFG,
- .enable_bit = 60,
- .hw = {
- .init = &clk_mmc23_init,
- },
-};
-
static struct clk_init_data clk_mmc45_init = {
.name = "mmc45",
.ops = &dmn_ops,
@@ -599,14 +622,6 @@ static struct clk_init_data clk_mmc45_init = {
.num_parents = ARRAY_SIZE(dmn_clk_parents),
};
-static struct clk_dmn clk_mmc45 = {
- .regofs = SIRFSOC_CLKC_MMC_CFG,
- .enable_bit = 61,
- .hw = {
- .init = &clk_mmc45_init,
- },
-};
-
/*
* peripheral controllers in io domain
*/
@@ -667,6 +682,20 @@ static struct clk_ops ios_ops = {
.disable = std_clk_disable,
};
+static struct clk_init_data clk_cphif_init = {
+ .name = "cphif",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_cphif = {
+ .enable_bit = 20,
+ .hw = {
+ .init = &clk_cphif_init,
+ },
+};
+
static struct clk_init_data clk_dmac0_init = {
.name = "dmac0",
.ops = &ios_ops,
@@ -695,20 +724,6 @@ static struct clk_std clk_dmac1 = {
},
};
-static struct clk_init_data clk_nand_init = {
- .name = "nand",
- .ops = &ios_ops,
- .parent_names = std_clk_io_parents,
- .num_parents = ARRAY_SIZE(std_clk_io_parents),
-};
-
-static struct clk_std clk_nand = {
- .enable_bit = 34,
- .hw = {
- .init = &clk_nand_init,
- },
-};
-
static struct clk_init_data clk_audio_init = {
.name = "audio",
.ops = &ios_ops,
@@ -970,7 +985,7 @@ static const char *std_clk_sys_parents[] = {
};
static struct clk_init_data clk_security_init = {
- .name = "mf",
+ .name = "security",
.ops = &ios_ops,
.parent_names = std_clk_sys_parents,
.num_parents = ARRAY_SIZE(std_clk_sys_parents),
@@ -1014,96 +1029,3 @@ static struct clk_std clk_usb1 = {
.init = &clk_usb1_init,
},
};
-
-enum prima2_clk_index {
- /* 0 1 2 3 4 5 6 7 8 9 */
- rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps,
- mf, io, cpu, uart0, uart1, uart2, tsc, i2c0, i2c1, spi0,
- spi1, pwmc, efuse, pulse, dmac0, dmac1, nand, audio, usp0, usp1,
- usp2, vip, gfx, mm, lcd, vpp, mmc01, mmc23, mmc45, usbpll,
- usb0, usb1, maxclk,
-};
-
-static struct clk_hw *prima2_clk_hw_array[maxclk] __initdata = {
- NULL, /* dummy */
- NULL,
- &clk_pll1.hw,
- &clk_pll2.hw,
- &clk_pll3.hw,
- &clk_mem.hw,
- &clk_sys.hw,
- &clk_security.hw,
- &clk_dsp.hw,
- &clk_gps.hw,
- &clk_mf.hw,
- &clk_io.hw,
- &clk_cpu.hw,
- &clk_uart0.hw,
- &clk_uart1.hw,
- &clk_uart2.hw,
- &clk_tsc.hw,
- &clk_i2c0.hw,
- &clk_i2c1.hw,
- &clk_spi0.hw,
- &clk_spi1.hw,
- &clk_pwmc.hw,
- &clk_efuse.hw,
- &clk_pulse.hw,
- &clk_dmac0.hw,
- &clk_dmac1.hw,
- &clk_nand.hw,
- &clk_audio.hw,
- &clk_usp0.hw,
- &clk_usp1.hw,
- &clk_usp2.hw,
- &clk_vip.hw,
- &clk_gfx.hw,
- &clk_mm.hw,
- &clk_lcd.hw,
- &clk_vpp.hw,
- &clk_mmc01.hw,
- &clk_mmc23.hw,
- &clk_mmc45.hw,
- &usb_pll_clk_hw,
- &clk_usb0.hw,
- &clk_usb1.hw,
-};
-
-static struct clk *prima2_clks[maxclk];
-static struct clk_onecell_data clk_data;
-
-static void __init sirfsoc_clk_init(struct device_node *np)
-{
- struct device_node *rscnp;
- int i;
-
- rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
- sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
- if (!sirfsoc_rsc_vbase)
- panic("unable to map rsc registers\n");
- of_node_put(rscnp);
-
- sirfsoc_clk_vbase = of_iomap(np, 0);
- if (!sirfsoc_clk_vbase)
- panic("unable to map clkc registers\n");
-
- /* These are always available (RTC and 26MHz OSC)*/
- prima2_clks[rtc] = clk_register_fixed_rate(NULL, "rtc", NULL,
- CLK_IS_ROOT, 32768);
- prima2_clks[osc]= clk_register_fixed_rate(NULL, "osc", NULL,
- CLK_IS_ROOT, 26000000);
-
- for (i = pll1; i < maxclk; i++) {
- prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
- BUG_ON(IS_ERR(prima2_clks[i]));
- }
- clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
- clk_register_clkdev(prima2_clks[io], NULL, "io");
- clk_register_clkdev(prima2_clks[mem], NULL, "mem");
-
- clk_data.clks = prima2_clks;
- clk_data.clk_num = maxclk;
-
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-CLK_OF_DECLARE(sirfsoc_clk, "sirf,prima2-clkc", sirfsoc_clk_init);
diff --git a/drivers/clk/sirf/clk-prima2.c b/drivers/clk/sirf/clk-prima2.c
new file mode 100644
index 0000000..292c293
--- /dev/null
+++ b/drivers/clk/sirf/clk-prima2.c
@@ -0,0 +1,152 @@
+/*
+ * Clock tree for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "prima2.h"
+#include "clk-common.c"
+
+static struct clk_dmn clk_mmc01 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 59,
+ .hw = {
+ .init = &clk_mmc01_init,
+ },
+};
+
+static struct clk_dmn clk_mmc23 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 60,
+ .hw = {
+ .init = &clk_mmc23_init,
+ },
+};
+
+static struct clk_dmn clk_mmc45 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 61,
+ .hw = {
+ .init = &clk_mmc45_init,
+ },
+};
+
+static struct clk_init_data clk_nand_init = {
+ .name = "nand",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_nand = {
+ .enable_bit = 34,
+ .hw = {
+ .init = &clk_nand_init,
+ },
+};
+
+enum prima2_clk_index {
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps,
+ mf, io, cpu, uart0, uart1, uart2, tsc, i2c0, i2c1, spi0,
+ spi1, pwmc, efuse, pulse, dmac0, dmac1, nand, audio, usp0, usp1,
+ usp2, vip, gfx, mm, lcd, vpp, mmc01, mmc23, mmc45, usbpll,
+ usb0, usb1, cphif, maxclk,
+};
+
+static __initdata struct clk_hw *prima2_clk_hw_array[maxclk] = {
+ NULL, /* dummy */
+ NULL,
+ &clk_pll1.hw,
+ &clk_pll2.hw,
+ &clk_pll3.hw,
+ &clk_mem.hw,
+ &clk_sys.hw,
+ &clk_security.hw,
+ &clk_dsp.hw,
+ &clk_gps.hw,
+ &clk_mf.hw,
+ &clk_io.hw,
+ &clk_cpu.hw,
+ &clk_uart0.hw,
+ &clk_uart1.hw,
+ &clk_uart2.hw,
+ &clk_tsc.hw,
+ &clk_i2c0.hw,
+ &clk_i2c1.hw,
+ &clk_spi0.hw,
+ &clk_spi1.hw,
+ &clk_pwmc.hw,
+ &clk_efuse.hw,
+ &clk_pulse.hw,
+ &clk_dmac0.hw,
+ &clk_dmac1.hw,
+ &clk_nand.hw,
+ &clk_audio.hw,
+ &clk_usp0.hw,
+ &clk_usp1.hw,
+ &clk_usp2.hw,
+ &clk_vip.hw,
+ &clk_gfx.hw,
+ &clk_mm.hw,
+ &clk_lcd.hw,
+ &clk_vpp.hw,
+ &clk_mmc01.hw,
+ &clk_mmc23.hw,
+ &clk_mmc45.hw,
+ &usb_pll_clk_hw,
+ &clk_usb0.hw,
+ &clk_usb1.hw,
+ &clk_cphif.hw,
+};
+
+static struct clk *prima2_clks[maxclk];
+
+static void __init prima2_clk_init(struct device_node *np)
+{
+ struct device_node *rscnp;
+ int i;
+
+ rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
+ sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
+ if (!sirfsoc_rsc_vbase)
+ panic("unable to map rsc registers\n");
+ of_node_put(rscnp);
+
+ sirfsoc_clk_vbase = of_iomap(np, 0);
+ if (!sirfsoc_clk_vbase)
+ panic("unable to map clkc registers\n");
+
+ /* These are always available (RTC and 26MHz OSC)*/
+ prima2_clks[rtc] = clk_register_fixed_rate(NULL, "rtc", NULL,
+ CLK_IS_ROOT, 32768);
+ prima2_clks[osc] = clk_register_fixed_rate(NULL, "osc", NULL,
+ CLK_IS_ROOT, 26000000);
+
+ for (i = pll1; i < maxclk; i++) {
+ prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
+ BUG_ON(!prima2_clks[i]);
+ }
+ clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
+ clk_register_clkdev(prima2_clks[io], NULL, "io");
+ clk_register_clkdev(prima2_clks[mem], NULL, "mem");
+ clk_register_clkdev(prima2_clks[mem], NULL, "osc");
+
+ clk_data.clks = prima2_clks;
+ clk_data.clk_num = maxclk;
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(prima2_clk, "sirf,prima2-clkc", prima2_clk_init);
diff --git a/drivers/clk/sirf/prima2.h b/drivers/clk/sirf/prima2.h
new file mode 100644
index 0000000..01bc385
--- /dev/null
+++ b/drivers/clk/sirf/prima2.h
@@ -0,0 +1,25 @@
+#define SIRFSOC_CLKC_CLK_EN0 0x0000
+#define SIRFSOC_CLKC_CLK_EN1 0x0004
+#define SIRFSOC_CLKC_REF_CFG 0x0014
+#define SIRFSOC_CLKC_CPU_CFG 0x0018
+#define SIRFSOC_CLKC_MEM_CFG 0x001c
+#define SIRFSOC_CLKC_SYS_CFG 0x0020
+#define SIRFSOC_CLKC_IO_CFG 0x0024
+#define SIRFSOC_CLKC_DSP_CFG 0x0028
+#define SIRFSOC_CLKC_GFX_CFG 0x002c
+#define SIRFSOC_CLKC_MM_CFG 0x0030
+#define SIRFSOC_CLKC_LCD_CFG 0x0034
+#define SIRFSOC_CLKC_MMC_CFG 0x0038
+#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
+#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
+#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
+#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
+#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
+#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
+#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
+#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
+#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
+#define SIRFSOC_USBPHY_PLL_CTRL 0x0008
+#define SIRFSOC_USBPHY_PLL_POWERDOWN BIT(1)
+#define SIRFSOC_USBPHY_PLL_BYPASS BIT(2)
+#define SIRFSOC_USBPHY_PLL_LOCK BIT(3)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists