[an error occurred while processing this directive]

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20140106223748.140256754@linuxfoundation.org>
Date:	Mon,  6 Jan 2014 14:37:38 -0800
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org,
	Eric Nelson <eric.nelson@...ndarydevices.com>,
	Marek Vasut <marex@...x.de>, Shawn Guo <shawn.guo@...aro.org>,
	Richard Zhu <r65037@...escale.com>,
	Linux-IDE <linux-ide@...r.kernel.org>, Tejun Heo <tj@...nel.org>
Subject: [PATCH 3.12 097/144] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marex@...x.de>

commit 10becdb402af4fd4808a0491a726b96128c41076 upstream.

We must clear this IMX6Q_GPR13_SATA_MPLL_CLK_EN bit on i.MX6Q, otherwise
Linux will fail to find the attached drive on some boards.

This entire fix was:
Reported-by: Eric Nelson <eric.nelson@...ndarydevices.com>

Signed-off-by: Marek Vasut <marex@...x.de>
Reviewed-by: Shawn Guo <shawn.guo@...aro.org>
Cc: Richard Zhu <r65037@...escale.com>
Cc: Linux-IDE <linux-ide@...r.kernel.org>
Signed-off-by: Tejun Heo <tj@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/ata/ahci_imx.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -60,7 +60,7 @@ static int imx6q_sata_init(struct device
 	/*
 	 * set PHY Paremeters, two steps to configure the GPR13,
 	 * one write for rest of parameters, mask of first write
-	 * is 0x07fffffd, and the other one write for setting
+	 * is 0x07ffffff, and the other one write for setting
 	 * the mpll_clk_en.
 	 */
 	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -71,6 +71,7 @@ static int imx6q_sata_init(struct device
 			| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
 			| IMX6Q_GPR13_SATA_TX_BOOST_MASK
 			| IMX6Q_GPR13_SATA_TX_LVL_MASK
+			| IMX6Q_GPR13_SATA_MPLL_CLK_EN
 			| IMX6Q_GPR13_SATA_TX_EDGE_RATE
 			, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
 			| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/