[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <52CE8314.2000000@ti.com>
Date: Thu, 9 Jan 2014 16:38:04 +0530
From: Roger Quadros <rogerq@...com>
To: Michele Paolino <m.paolino@...tualopensystems.com>
CC: <linux-omap@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 0/5] USB Host support for OMAP5 uEVM (for 3.14)
Hi Michele,
Did you enable CONFIG_USB_EHCI_HCD_OMAP in the kernel config?
It is not enabled by default in omap2plus_defconfig.
cheers,
-roger
On 01/09/2014 04:34 PM, Michele Paolino wrote:
> Hello Roger,
>
> I'm testing your patch on an OMAP5430 EVM board. The ethernet is not working in my case. The kernel I'm using is (Tero Kristo's repo - branch 3.13-rc7-dt-clks-v13). Is there something that I'm missing?
>
> Here below you can find more info about my configuration:
>
> boot error messages:
> eth0: ERROR while getting interface flags: No such device
> SIOCSIFADDR: No such device
> eth0: ERROR while getting interface flags: No such device
> SIOCADDRT: Network is unreachable
>
> root@...P5:~# /usr/lib/klibc/bin/ipconfig eth0
> ipconfig: eth0: SIOCGIFINDEX: No such device
> /usr/lib/klibc/bin/ipconfig: no devices to configure
>
> root@...P5:~# uname -a
> Linux OMAP5 3.13.0-rc7-g2a4526d-dirty #0 SMP Wed Jan 8 10:41:48 CET 2014x
>
> root@...P5:~# dmesg | grep eth
> [ 1.661434] usbcore: registered new interface driver cdc_ether
>
> Regards,
>
>
> On 08/01/2014 07:15, Roger Quadros wrote:
>> Hi Benoit & Tony,
>>
>> This patchset brings up USB Host ports and Ethernet port on
>> the OMAP5 uEVM board.
>>
>> It depends on the TI Clock DT conversion patches [1] and is based
>> on 3.13-rc7
>>
>> [1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895
>>
>> Changelog:
>>
>> v4:
>> - Updated DT binding document for clock binding
>>
>> v3:
>> - Rebased on top of 3.13-rc7
>>
>> cheers,
>> -roger
>>
>> Roger Quadros (5):
>> mfd: omap-usb-host: Update DT clock binding information
>> ARM: dts: OMAP5: Add 60MHz clock reference to USB Host module
>> ARM: dts: omap4-panda: Provide USB PHY clock
>> ARM: dts: omap5-uevm: Provide USB PHY clock
>> ARM: OMAP2+: Remove legacy_init_ehci_clk()
>>
>> Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++
>> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++------
>> arch/arm/boot/dts/omap5-uevm.dts | 8 ++------
>> arch/arm/boot/dts/omap5.dtsi | 2 ++
>> arch/arm/mach-omap2/pdata-quirks.c | 16 ----------------
>> 5 files changed, 10 insertions(+), 28 deletions(-)
>>
>
>
> --
> *Michele Paolino*, Virtualization R&D Engineer
> Virtual Open Systems
> /Open Source KVM Virtualization Developments/
> /Multicore Systems Virtualization Porting Services/
> Web/:/ www.virtualopensystems. <http://www.virtualopensystems.com/>com <http://www.virtualopensystems.com/>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists