| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1389625559-32414-2-git-send-email-mathias.nyman@linux.intel.com>
Date: Mon, 13 Jan 2014 17:05:50 +0200
From: Mathias Nyman <mathias.nyman@...ux.intel.com>
To: <linux-usb@...r.kernel.org>
Cc: <sarah.a.sharp@...ux.intel.com>, <dan.j.williams@...el.com>,
<linux-kernel@...r.kernel.org>,
Mathias Nyman <mathias.nyman@...ux.intel.com>
Subject: [RFC 01/10] xhci: Use command structures when calling xhci_configure_endpoint
To create a global command queue we need to fill a command structure
for each entry on the command ring.
We start by requiring xhci_configure_endpoint() to be called with
a proper command structure. Functions xhci_check_maxpacket and xhci_check_bandwith
that called xhci_configure_endpoint without a command strucure are fixed.
A special case where an endpoint needs to be configured after reset, done in interrupt
context is also changed to create a command strucure. (this command
structure is not used yet, but will be later when we requre all queued commands
to have a command strucure)
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
---
drivers/usb/host/xhci-ring.c | 10 ++---
drivers/usb/host/xhci.c | 95 +++++++++++++++++++++++---------------------
2 files changed, 54 insertions(+), 51 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e2f3f4..da83a844 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1180,12 +1180,15 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
* because the HW can't handle two commands being queued in a row.
*/
if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
+ struct xhci_command *command;
+ command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Queueing configure endpoint command");
xhci_queue_configure_endpoint(xhci,
xhci->devs[slot_id]->in_ctx->dma, slot_id,
false);
xhci_ring_cmd_db(xhci);
+ kfree(command);
} else {
/* Clear our internal halted state and restart the ring(s) */
xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
@@ -1439,7 +1442,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
add_flags - SLOT_FLAG == drop_flags) {
ep_state = virt_dev->eps[ep_index].ep_state;
if (!(ep_state & EP_HALTED))
- goto bandwidth_change;
+ return;
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Completed config ep cmd - "
"last ep index = %d, state = %d",
@@ -1449,11 +1452,6 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
-bandwidth_change:
- xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
- "Completed config ep cmd");
- virt_dev->cmd_status = cmd_comp_code;
- complete(&virt_dev->cmd_completion);
return;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 4265b48..5e65052 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1179,10 +1179,10 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, struct urb *urb)
{
- struct xhci_container_ctx *in_ctx;
struct xhci_container_ctx *out_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_command *command;
int max_packet_size;
int hw_max_packet_size;
int ret = 0;
@@ -1207,18 +1207,24 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
/* FIXME: This won't work if a non-default control endpoint
* changes max packet sizes.
*/
- in_ctx = xhci->devs[slot_id]->in_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+
+ command = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ command->in_ctx = xhci->devs[slot_id]->in_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto command_cleanup;
}
/* Set up the modified control endpoint 0 */
xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
xhci->devs[slot_id]->out_ctx, ep_index);
- ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+ ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
@@ -1226,16 +1232,20 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
ctrl_ctx->drop_flags = 0;
xhci_dbg(xhci, "Slot %d input context\n", slot_id);
- xhci_dbg_ctx(xhci, in_ctx, ep_index);
+ xhci_dbg_ctx(xhci, command->in_ctx, ep_index);
xhci_dbg(xhci, "Slot %d output context\n", slot_id);
xhci_dbg_ctx(xhci, out_ctx, ep_index);
- ret = xhci_configure_endpoint(xhci, urb->dev, NULL,
+ ret = xhci_configure_endpoint(xhci, urb->dev, command,
true, false);
/* Clean up the input context for later use by bandwidth
* functions.
*/
+command_cleanup:
+ kfree(command->completion);
+ kfree(command);
+
ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
}
return ret;
@@ -2568,21 +2578,16 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
int ret;
int timeleft;
unsigned long flags;
- struct xhci_container_ctx *in_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
- struct completion *cmd_completion;
- u32 *cmd_status;
struct xhci_virt_device *virt_dev;
- union xhci_trb *cmd_trb;
spin_lock_irqsave(&xhci->lock, flags);
virt_dev = xhci->devs[udev->slot_id];
- if (command)
- in_ctx = command->in_ctx;
- else
- in_ctx = virt_dev->in_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ if (!command)
+ return -EINVAL;
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
if (!ctrl_ctx) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
@@ -2599,7 +2604,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
return -ENOMEM;
}
if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
- xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) {
+ xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) {
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -2607,27 +2612,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
return -ENOMEM;
}
- if (command) {
- cmd_completion = command->completion;
- cmd_status = &command->status;
- command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
- list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
- } else {
- cmd_completion = &virt_dev->cmd_completion;
- cmd_status = &virt_dev->cmd_status;
- }
- init_completion(cmd_completion);
+ command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
+ list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
- cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
if (!ctx_change)
- ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
+ ret = xhci_queue_configure_endpoint(xhci, command->in_ctx->dma,
udev->slot_id, must_succeed);
else
- ret = xhci_queue_evaluate_context(xhci, in_ctx->dma,
+ ret = xhci_queue_evaluate_context(xhci, command->in_ctx->dma,
udev->slot_id, must_succeed);
if (ret < 0) {
- if (command)
- list_del(&command->cmd_list);
+ list_del(&command->cmd_list);
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -2640,7 +2635,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
/* Wait for the configure endpoint command to complete */
timeleft = wait_for_completion_interruptible_timeout(
- cmd_completion,
+ command->completion,
XHCI_CMD_DEFAULT_TIMEOUT);
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for %s command\n",
@@ -2649,16 +2644,18 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
"configure endpoint" :
"evaluate context");
/* cancel the configure endpoint command */
- ret = xhci_cancel_cmd(xhci, command, cmd_trb);
+ ret = xhci_cancel_cmd(xhci, command, command->command_trb);
if (ret < 0)
return ret;
return -ETIME;
}
if (!ctx_change)
- ret = xhci_configure_endpoint_result(xhci, udev, cmd_status);
+ ret = xhci_configure_endpoint_result(xhci, udev,
+ &command->status);
else
- ret = xhci_evaluate_context_result(xhci, udev, cmd_status);
+ ret = xhci_evaluate_context_result(xhci, udev,
+ &command->status);
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
spin_lock_irqsave(&xhci->lock, flags);
@@ -2692,6 +2689,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_virt_device *virt_dev;
struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_slot_ctx *slot_ctx;
+ struct xhci_command *command;
ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
if (ret <= 0)
@@ -2703,12 +2701,16 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
virt_dev = xhci->devs[udev->slot_id];
+ command = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
+ command->in_ctx = virt_dev->in_ctx;
+
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto command_cleanup;
}
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
@@ -2716,20 +2718,20 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
/* Don't issue the command if there's no endpoints to update. */
if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
- ctrl_ctx->drop_flags == 0)
- return 0;
-
+ ctrl_ctx->drop_flags == 0) {
+ ret = 0;
+ goto command_cleanup;
+ }
xhci_dbg(xhci, "New Input Control Context:\n");
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
xhci_dbg_ctx(xhci, virt_dev->in_ctx,
LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info)));
- ret = xhci_configure_endpoint(xhci, udev, NULL,
+ ret = xhci_configure_endpoint(xhci, udev, command,
false, false);
- if (ret) {
+ if (ret)
/* Callee should call reset_bandwidth() */
- return ret;
- }
+ goto command_cleanup;
xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
xhci_dbg_ctx(xhci, virt_dev->out_ctx,
@@ -2758,6 +2760,9 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
virt_dev->eps[i].new_ring = NULL;
}
+command_cleanup:
+ kfree(command->completion);
+ kfree(command);
return ret;
}
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists