| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.LRH.2.02.1401141629520.19206@file01.intranet.prod.int.rdu2.redhat.com>
Date: Tue, 14 Jan 2014 16:43:43 -0500 (EST)
From: Mikulas Patocka <mpatocka@...hat.com>
To: Peter Zijlstra <peterz@...radead.org>
cc: Stephen Rothwell <sfr@...b.auug.org.au>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...e.hu>, "H. Peter Anvin" <hpa@...or.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
linux-next@...r.kernel.org, linux-kernel@...r.kernel.org,
cpufreq@...r.kernel.org
Subject: Re: linux-next: build failure after merge of the tip tree
On Tue, 14 Jan 2014, Peter Zijlstra wrote:
> On Tue, Jan 14, 2014 at 02:06:57PM -0500, Mikulas Patocka wrote:
> > On Tue, 14 Jan 2014, Peter Zijlstra wrote:
> > > > Caused by commit 62b94a08da1b ("sched/preempt: Take away
> > > > preempt_enable_no_resched() from modules")
>
> Read these two lines, then note that:
>
> > Try adding #include <linux/preempt.h> to speedstep-lib.c. Does it help?
>
> this obviously will not work as preempt_check_resched() and
> preempt_enable_no_resched() are no longer available to modules.
I see, you added commit 62b94a08da1bae9d187d49dfcd6665af393750f8 to
linux-next, that broke my patch.
> > > I think that pm commit is a very good example of why the sched/preempt
> > > patch is a very good idea.
> > >
> > > Also that Changelog fails to explain why enabling interrupts helps. What
> > > interrupt is required for progress, and how does it make the progress
> > > happen.
> >
> > There is no explanation. It's hardware issue and I have no documentation
> > for the hardware.
>
> Rafael works for Intel, he ought to be able to figure out wtf the
> hardware does/needs.
>
> > The general problem is that if there are bus-master transfers running (or
> > possibly for other hardware reasons), the CPU refuses to change frequency.
> > You can wait a little bit and retry and maybe you succeed changing the
> > frequency next time.
> >
> > If you enable interrupts, wait, disable interrupts and retry, you may
> > succeed. If you keep interrupts disabled and retry, you never succeed, no
> > matter how long do you wait. I found it experimentally, I don't know
> > reason for that.
>
> Sounds like magic goo..
>
> In any case, try the below, it does the same but is far less horrid.
>
> ---
> drivers/cpufreq/speedstep-smi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
> index 0f5326d6f79f..57d31538c248 100644
> --- a/drivers/cpufreq/speedstep-smi.c
> +++ b/drivers/cpufreq/speedstep-smi.c
> @@ -188,6 +188,7 @@ static void speedstep_set_state(unsigned int state)
> return;
>
> /* Disable IRQs */
> + preempt_disable();
> local_irq_save(flags);
>
> command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
> @@ -200,7 +201,9 @@ static void speedstep_set_state(unsigned int state)
> if (retry) {
> pr_debug("retry %u, previous result %u, waiting...\n",
> retry, result);
> + local_irq_restore(flags);
^^^ this is wrong, because the function speedstep_set_state may already be
called with interrupts disabled from speedstep_get_freqs. So, you need to
enable interrupts unconditionally, even if they were disabled at the
beginning of the function speedstep_set_state.
I know it's dirty to enable interrupts in a function that was called with
disabled interrupts, but here it must be so (you could rewrite
speedstep_get_freqs to not disable interrupts if you want to avoid this
dirtiness).
> mdelay(retry * 50);
> + local_irq_save(flags);
> }
> retry++;
> __asm__ __volatile__(
> @@ -217,6 +220,7 @@ static void speedstep_set_state(unsigned int state)
>
> /* enable IRQs */
> local_irq_restore(flags);
> + preempt_enable();
>
> if (new_state == state)
> pr_debug("change to %u MHz succeeded after %u tries "
You need also preempt_disable/enable in speedstep_get_freqs.
Here I'm resending the patch, to account for
62b94a08da1bae9d187d49dfcd6665af393750f8.
From: Mikulas Patocka <mpatocka@...hat.com>
speedstep-smi: enable interrupts when waiting
On Dell Latitude C600 laptop with Pentium 3 850MHz processor, the
speedstep-smi driver sometimes loads and sometimes doesn't load with
"change to state X failed" message.
I found out that we need to enable interrupts while waiting. When we
enable interrupts, the blockage that prevents frequency transition
resolves and the transition is possible. With disabled interrupts, the
blockage doesn't resolve (no matter how long do we wait).
This patch enables interrupts in the function speedstep_set_state that can
be called with disabled interrupts. However, this function is called with
disabled interrupts only from speedstep_get_freqs, so it shouldn't cause
any problem.
Signed-off-by: Mikulas Patocka <mpatocka@...hat.com>
---
drivers/cpufreq/speedstep-lib.c | 3 +++
drivers/cpufreq/speedstep-smi.c | 12 ++++++++++++
2 files changed, 15 insertions(+)
Index: linux-next/drivers/cpufreq/speedstep-smi.c
===================================================================
--- linux-next.orig/drivers/cpufreq/speedstep-smi.c 2014-01-14 22:26:59.000000000 +0100
+++ linux-next/drivers/cpufreq/speedstep-smi.c 2014-01-14 22:35:11.000000000 +0100
@@ -156,6 +156,7 @@ static void speedstep_set_state(unsigned
return;
/* Disable IRQs */
+ preempt_disable();
local_irq_save(flags);
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
@@ -166,9 +167,19 @@ static void speedstep_set_state(unsigned
do {
if (retry) {
+ /*
+ * We need to enable interrupts, otherwise the blockage
+ * won't resolve.
+ *
+ * We disable preemption so that other processes don't
+ * run. If other processes were running, they could
+ * submit more DMA requests, making the blockage worse.
+ */
pr_debug("retry %u, previous result %u, waiting...\n",
retry, result);
+ local_irq_enable();
mdelay(retry * 50);
+ local_irq_disable();
}
retry++;
__asm__ __volatile__(
@@ -185,6 +196,7 @@ static void speedstep_set_state(unsigned
/* enable IRQs */
local_irq_restore(flags);
+ preempt_enable();
if (new_state == state)
pr_debug("change to %u MHz succeeded after %u tries "
Index: linux-next/drivers/cpufreq/speedstep-lib.c
===================================================================
--- linux-next.orig/drivers/cpufreq/speedstep-lib.c 2014-01-14 22:29:07.000000000 +0100
+++ linux-next/drivers/cpufreq/speedstep-lib.c 2014-01-14 22:31:04.000000000 +0100
@@ -400,6 +400,7 @@ unsigned int speedstep_get_freqs(enum sp
pr_debug("previous speed is %u\n", prev_speed);
+ preempt_disable();
local_irq_save(flags);
/* switch to low state */
@@ -464,6 +465,8 @@ unsigned int speedstep_get_freqs(enum sp
out:
local_irq_restore(flags);
+ preempt_enable();
+
return ret;
}
EXPORT_SYMBOL_GPL(speedstep_get_freqs);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists