[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACh+v5OSBxudDN2vpRWLuP+TwqCNT3Fv21cJc1whU90v1MysfQ@mail.gmail.com>
Date: Wed, 15 Jan 2014 09:34:39 +0100
From: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
Cc: Jean-Jacques Hiblot <jjhiblot@...phandler.com>,
boris brezillon <b.brezillon@...rkiz.com>,
Arnd Bergmann <arnd@...db.de>,
linux-arm-kernel@...ts.infradead.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 00/12] Device Tree support for the at91sam9261ek
2014/1/14 Nicolas Ferre <nicolas.ferre@...el.com>:
> On 09/01/2014 13:31, Jean-Jacques Hiblot :
>> This patch set aims at bringing a basic device tree support for the sam9261.
>> It's mostly based on the sam9263 stuff.
>
> Nice! Thanks a lot for stepping up.
>
> One general comment though: I would like to have new AT91 SoC described
> in DT integrating mainline with Common Clock Framework implemented.
> I feel that it would make sense to directly convert sam9261 to CCF to
> avoid the pain of an intermediary DT description that would last only
> for a couple of kernel revisions.
This is a work in progress. I'm doing it on top of this patch serie.
>
>> It introduces a new driver for the smc/ebi bus. It's used to configure the EBI
>> from the DT. I haven't documented its DT bindings yet. Timings can be provided
>> as raw values or nanoseconds.
>
> Thanks a lot for taking this SMC-as-a-driver task: it is very cool to
> have it!
>
> I will try to review your patches in the coming days... But Boris
> already did a good job at this ;-)
>
>> Change since V1:
>> * changed the DT representation to use address translation and separate the
>> timings' configuration from the device properties by adding a "simple-bus"
>> inetrmediate node.
>> * moved the smc driver from drivers/bus to drivers/memmory
>> * smc driver now accepts timings in nanoseconds as well as raw register values
>> * smc driver can clip the timings if they're out of bound and dump them to the
>> console
>> * DM9000 timings are now described in nanosecs (for the virtue of example)
>>
>> supported features:
>> * dbgu
>> * nand
>> * lcd
>> * ethernet
>> * leds
>>
>> Jean-Jacques
>>
>> Jean-Jacques Hiblot (12):
>> at91: dt: Add at91sam9261 dt SoC support
>> at91: dt: sam9261: Basic Device Tree support for the at91sam9261ek
>> at91: dt: sam9261: Added support for the lcd display
>> at91: smc: export sam9_smc_cs_read and sam9_smc_cs_configure.
>> at91: smc: Increased the size of tdf_cycles in struct sam9_smc_config.
>> at91: smc: Adds helper functions to validate and clip the smc timings.
>> at91: dt: smc: Added smc bus driver
>> at91: sam9261: Add a clock definition for the smc
>> at91: dt: sam9261: Pinmux DT entries for the SMC/EBI interface
>> at91: dt: sam9261: Add an entry in the DT for the SMC/EBI bus driver.
>> at91: dt: sam9261: moved the NAND under the smc node
>> at91: dt: sam9261: Added DM9000 in the device tree
>>
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/at91sam9261.dtsi | 639 +++++++++++++++++++++++++
>> arch/arm/boot/dts/at91sam9261ek.dts | 164 +++++++
>> arch/arm/mach-at91/at91sam9261.c | 17 +
>> arch/arm/mach-at91/include/mach/at91sam9_smc.h | 6 +-
>> arch/arm/mach-at91/sam9_smc.c | 81 +++-
>> drivers/memory/Kconfig | 10 +
>> drivers/memory/Makefile | 1 +
>> drivers/memory/atmel-smc.c | 431 +++++++++++++++++
>> 9 files changed, 1348 insertions(+), 3 deletions(-)
>> create mode 100644 arch/arm/boot/dts/at91sam9261.dtsi
>> create mode 100644 arch/arm/boot/dts/at91sam9261ek.dts
>> create mode 100644 drivers/memory/atmel-smc.c
>>
>
>
> --
> Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists