| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1389859338-11685-2-git-send-email-LW@KARO-electronics.de>
Date: Thu, 16 Jan 2014 09:02:16 +0100
From: Lothar Waßmann <LW@...O-electronics.de>
To: linux-input@...r.kernel.org,
Simon Budig <simon.budig@...nelconcepts.de>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Rob Landley <rob@...dley.net>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Thierry Reding <thierry.reding@...il.com>,
Grant Likely <grant.likely@...aro.org>,
Jonathan Cameron <jic23@...nel.org>,
Shawn Guo <shawn.guo@...aro.org>,
Silvio F <silvio.fricke@...il.com>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
Jingoo Han <jg1.han@...sung.com>,
Fugang Duan <B38611@...escale.com>,
Sachin Kamat <sachin.kamat@...aro.org>,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Lothar Waßmann <LW@...O-electronics.de>
Subject: [PATCHv2 1/3] Input: edt_ft5x06: use devm_* functions where appropriate
Simplify the error path and remove() function by using devm_*
functions for requesting gpios and irq and allocating the input
device.
Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
---
drivers/input/touchscreen/edt-ft5x06.c | 62 ++++++++++---------------------
1 files changed, 20 insertions(+), 42 deletions(-)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index af0d68b..acb6b9f 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -623,8 +623,9 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
if (gpio_is_valid(reset_pin)) {
/* this pulls reset down, enabling the low active reset */
- error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW,
- "edt-ft5x06 reset");
+ error = devm_gpio_request_one(&client->dev, reset_pin,
+ GPIOF_OUT_INIT_LOW,
+ "edt-ft5x06 reset");
if (error) {
dev_err(&client->dev,
"Failed to request GPIO %d as reset pin, error %d\n",
@@ -723,7 +724,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
return error;
if (gpio_is_valid(pdata->irq_pin)) {
- error = gpio_request_one(pdata->irq_pin,
+ error = devm_gpio_request_one(&client->dev, pdata->irq_pin,
GPIOF_IN, "edt-ft5x06 irq");
if (error) {
dev_err(&client->dev,
@@ -734,11 +735,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
}
tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
- input = input_allocate_device();
- if (!tsdata || !input) {
- dev_err(&client->dev, "failed to allocate driver data.\n");
- error = -ENOMEM;
- goto err_free_mem;
+ input = devm_input_allocate_device(&client->dev);
+ if (!input) {
+ dev_err(&client->dev, "failed to allocate input device.\n");
+ return -ENOMEM;
}
mutex_init(&tsdata->mutex);
@@ -749,7 +749,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
if (error) {
dev_err(&client->dev, "touchscreen probe failed\n");
- goto err_free_mem;
+ return error;
}
edt_ft5x06_ts_get_defaults(tsdata, pdata);
@@ -776,27 +776,30 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
if (error) {
dev_err(&client->dev, "Unable to init MT slots.\n");
- goto err_free_mem;
+ return error;
}
input_set_drvdata(input, tsdata);
i2c_set_clientdata(client, tsdata);
- error = request_threaded_irq(client->irq, NULL, edt_ft5x06_ts_isr,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- client->name, tsdata);
+ error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ edt_ft5x06_ts_isr,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ client->name, tsdata);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
- goto err_free_mem;
+ return error;
}
error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
if (error)
- goto err_free_irq;
+ return error;
error = input_register_device(input);
- if (error)
- goto err_remove_attrs;
+ if (error) {
+ sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+ return error;
+ }
edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
device_init_wakeup(&client->dev, 1);
@@ -806,40 +809,15 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
pdata->irq_pin, pdata->reset_pin);
return 0;
-
-err_remove_attrs:
- sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
-err_free_irq:
- free_irq(client->irq, tsdata);
-err_free_mem:
- input_free_device(input);
- kfree(tsdata);
-
- if (gpio_is_valid(pdata->irq_pin))
- gpio_free(pdata->irq_pin);
-
- return error;
}
static int edt_ft5x06_ts_remove(struct i2c_client *client)
{
- const struct edt_ft5x06_platform_data *pdata =
- dev_get_platdata(&client->dev);
struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
edt_ft5x06_ts_teardown_debugfs(tsdata);
sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
- free_irq(client->irq, tsdata);
- input_unregister_device(tsdata->input);
-
- if (gpio_is_valid(pdata->irq_pin))
- gpio_free(pdata->irq_pin);
- if (gpio_is_valid(pdata->reset_pin))
- gpio_free(pdata->reset_pin);
-
- kfree(tsdata);
-
return 0;
}
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists