| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1389916587-2541-11-git-send-email-durgadoss.r@intel.com>
Date: Fri, 17 Jan 2014 05:26:27 +0530
From: Durgadoss R <durgadoss.r@...el.com>
To: rui.zhang@...el.com, eduardo.valentin@...com,
linux-pm@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, hongbo.zhang@...escale.com,
wni@...dia.com, Durgadoss R <durgadoss.r@...el.com>
Subject: [PATCHv5 10/10] Thermal: Dummy driver used for testing
This patch has a dummy driver that can be used for
testing purposes. This patch is not for merge.
Signed-off-by: Durgadoss R <durgadoss.r@...el.com>
---
drivers/thermal/Kconfig | 6 +
drivers/thermal/Makefile | 3 +
drivers/thermal/thermal_test.c | 322 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 331 insertions(+)
create mode 100644 drivers/thermal/thermal_test.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f6a8057..7bfa23e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -225,4 +225,10 @@ depends on PLAT_SAMSUNG
source "drivers/thermal/samsung/Kconfig"
endmenu
+config THERMAL_TEST
+ tristate "test driver"
+ select THERMAL_V2
+ help
+ Enable this to test the thermal framework.
+
endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index d9ae9ac..9a7ed0e 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -32,3 +32,6 @@ obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o
+
+# dummy driver for testing
+obj-$(CONFIG_THERMAL_TEST) += thermal_test.o
diff --git a/drivers/thermal/thermal_test.c b/drivers/thermal/thermal_test.c
new file mode 100644
index 0000000..6bdb22b
--- /dev/null
+++ b/drivers/thermal/thermal_test.c
@@ -0,0 +1,322 @@
+/*
+ * thermal_test.c - This driver can be used to test Thermal
+ * Framework changes. Not specific to any
+ * platform. Fills the log buffer generously ;)
+ *
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * Author: Durgadoss R <durgadoss.r@...el.com>
+ */
+
+#define pr_fmt(fmt) "thermal_test: " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define MAX_THERMAL_ZONES 2
+#define MAX_THERMAL_SENSORS 2
+#define MAX_COOLING_DEVS 4
+#define NUM_THRESHOLDS 3
+
+static struct ts_data {
+ int curr_temp;
+ int flag;
+} ts_data;
+
+int active_trips[10] = {100, 90, 80, 70, 60, 50, 40, 30, 20, 10};
+int passive_trips[5] = {100, 90, 60, 50, 40};
+int wts[5] = {50, 50, 50, 50, 40};
+
+static struct platform_device *pdev;
+static unsigned long cur_cdev_state = 2;
+static struct thermal_sensor *ts, *ts1;
+static struct thermal_zone *tz;
+static struct thermal_cooling_device *cdev;
+
+static long thermal_thresholds[NUM_THRESHOLDS] = {30000, 40000, 50000};
+
+static struct thermal_trip_point trip = {
+ .hot = 90,
+ .crit = 100,
+ .num_passive_trips = 5,
+ .passive_trips = passive_trips,
+ .num_active_trips = 10,
+ .active_trips = active_trips,
+};
+
+static struct thermal_trip_point trip1 = {
+ .hot = 95,
+ .crit = 125,
+ .num_passive_trips = 0,
+ .passive_trips = passive_trips,
+ .num_active_trips = 6,
+ .active_trips = active_trips,
+};
+
+static struct thermal_map map = {
+ .trip_type = THERMAL_TRIP_PASSIVE,
+ .sensor_name = "ts",
+ .cdev_name = "cdev",
+ .num_weights = 5,
+ .trip_mask = 0x0F,
+ .weights = wts,
+};
+
+static int read_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = cur_cdev_state;
+ return 0;
+}
+
+static int write_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ cur_cdev_state = state;
+ return 0;
+}
+
+static int read_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 5;
+ return 0;
+}
+
+static int read_curr_temp(struct thermal_sensor *ts, long *temp)
+{
+ *temp = ts_data.curr_temp;
+ return 0;
+}
+
+static ssize_t
+flag_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%d\n", ts_data.flag);
+}
+
+static ssize_t
+flag_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ long flag;
+
+ if (kstrtol(buf, 10, &flag))
+ return -EINVAL;
+
+ ts_data.flag = flag;
+
+ if (flag == 0) {
+ thermal_sensor_unregister(ts);
+ ts = NULL;
+ pr_err("thermal_sensor_unregister (ts) done\n");
+ } else if (flag == 1) {
+ thermal_sensor_unregister(ts1);
+ ts1 = NULL;
+ pr_err("thermal_sensor_unregister (ts1) done\n");
+ } else if (flag == 2) {
+ thermal_cdev_unregister(cdev);
+ cdev = NULL;
+ pr_err("cdev unregister (cdev) done\n");
+ } else if (flag == 3) {
+ if (tz)
+ thermal_remove_thermal_zone(tz);
+ tz = NULL;
+ pr_err("removed thermal zone\n");
+ }
+
+ return count;
+}
+
+static ssize_t
+temp_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%d\n", ts_data.curr_temp);
+}
+
+static int read_threshold(struct thermal_sensor *ts, int indx, long *val)
+{
+ if (indx < 0 || indx >= NUM_THRESHOLDS)
+ return -EINVAL;
+
+ *val = thermal_thresholds[indx];
+ return 0;
+}
+
+static int write_threshold(struct thermal_sensor *ts, int indx, long val)
+{
+ if (indx < 0 || indx >= NUM_THRESHOLDS)
+ return -EINVAL;
+
+ thermal_thresholds[indx] = val;
+ return 0;
+}
+
+static ssize_t
+temp_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ long temp;
+
+ if (kstrtol(buf, 10, &temp))
+ return -EINVAL;
+
+ ts_data.curr_temp = temp;
+ return count;
+}
+
+static struct thermal_sensor_ops ts_ops = {
+ .get_temp = read_curr_temp,
+ .get_threshold = read_threshold,
+ .set_threshold = write_threshold,
+};
+
+static struct thermal_sensor_ops ts1_ops = {
+ .get_temp = read_curr_temp,
+ .get_threshold = read_threshold,
+ .set_threshold = write_threshold,
+};
+
+static struct thermal_cooling_device_ops cdev_ops = {
+ .get_cur_state = read_cur_state,
+ .set_cur_state = write_cur_state,
+ .get_max_state = read_max_state,
+};
+
+static DEVICE_ATTR(test_temp, S_IRUGO | S_IWUSR, temp_show, temp_store);
+static DEVICE_ATTR(sensor_enable, S_IRUGO | S_IWUSR, flag_show, flag_store);
+
+static int thermal_test_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ts_data.curr_temp = 30000;
+ ts_data.flag = 1;
+
+ ts = thermal_sensor_register("ts", NUM_THRESHOLDS, &ts_ops, &ts_data);
+ if (!ts) {
+ pr_err("thermal_sensor_register failed:\n");
+ return -EINVAL;
+ }
+
+ ts1 = thermal_sensor_register("ts1", NUM_THRESHOLDS, &ts1_ops, NULL);
+
+ cdev = thermal_cdev_register("cdev", NULL, &cdev_ops);
+ if (!cdev) {
+ pr_err("cdev_register failed:\n");
+ return -EINVAL;
+ }
+
+ device_create_file(&pdev->dev, &dev_attr_test_temp);
+ device_create_file(&pdev->dev, &dev_attr_sensor_enable);
+
+ /* Create a zone */
+ tz = thermal_create_thermal_zone("myZone", NULL);
+ if (!tz) {
+ pr_err("create_thermal_zone failed:\n");
+ return -EINVAL;
+ }
+
+ pr_err("Zone created successfully..\n");
+
+ ret = thermal_add_sensor_to_zone(tz, ts);
+ if (ret) {
+ pr_err("add_sensor_to_zone failed:%d\n", ret);
+ return ret;
+ }
+
+ ret = thermal_add_sensor_to_zone(tz, ts1);
+ pr_err("add_sensor (ts1) ret_val: %d\n", ret);
+
+ ret = thermal_add_cdev_to_zone(tz, cdev);
+ pr_err("add_cdev_to_zone (cdev) ret_val: %d\n", ret);
+
+ ret = thermal_add_sensor_trip_info(tz, ts, &trip);
+ ret = thermal_add_sensor_trip_info(tz, ts1, &trip1);
+ pr_err("add_sensor_trip_info (ts) ret_val: %d\n", ret);
+
+ ret = thermal_add_map_entry(tz, &map);
+ pr_err("add_map_entry (ts) ret_val: %d\n", ret);
+
+ return 0;
+}
+
+static int thermal_test_remove(struct platform_device *pdev)
+{
+ device_remove_file(&pdev->dev, &dev_attr_test_temp);
+ device_remove_file(&pdev->dev, &dev_attr_sensor_enable);
+
+ return 0;
+}
+
+/*********************************************************************
+ * Driver initialization and finalization
+ *********************************************************************/
+
+#define DRIVER_NAME "thermal_test"
+
+static const struct platform_device_id therm_id_table[] = {
+ { DRIVER_NAME, 1 },
+};
+
+static struct platform_driver thermal_test_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = thermal_test_probe,
+ .remove = thermal_test_remove,
+ .id_table = therm_id_table,
+};
+
+static int __init thermal_test_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&thermal_test_driver);
+ if (ret) {
+ pr_err("platform driver register failed:%d\n", ret);
+ return ret;
+ }
+
+ pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ pr_err("platform device register failed:%d\n", ret);
+ platform_driver_unregister(&thermal_test_driver);
+ }
+
+ return ret;
+}
+
+static void __exit thermal_test_exit(void)
+{
+ pr_err("in thermal_test_exit\n");
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&thermal_test_driver);
+}
+
+module_init(thermal_test_init);
+module_exit(thermal_test_exit);
+
+MODULE_AUTHOR("Durgadoss R <durgadoss.r@...el.com>");
+MODULE_DESCRIPTION("A dummy driver to test Thermal Framework");
+MODULE_LICENSE("GPL");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists