| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140117002813.GB837@core.coreip.homeip.net>
Date: Thu, 16 Jan 2014 16:28:13 -0800
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Lothar Waßmann <LW@...O-electronics.de>
Cc: linux-input@...r.kernel.org,
Simon Budig <simon.budig@...nelconcepts.de>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Rob Landley <rob@...dley.net>,
Thierry Reding <thierry.reding@...il.com>,
Grant Likely <grant.likely@...aro.org>,
Jonathan Cameron <jic23@...nel.org>,
Shawn Guo <shawn.guo@...aro.org>,
Silvio F <silvio.fricke@...il.com>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
Jingoo Han <jg1.han@...sung.com>,
Fugang Duan <B38611@...escale.com>,
Sachin Kamat <sachin.kamat@...aro.org>,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCHv2 1/3] Input: edt_ft5x06: use devm_* functions where
appropriate
On Thu, Jan 16, 2014 at 09:02:16AM +0100, Lothar Waßmann wrote:
> Simplify the error path and remove() function by using devm_*
> functions for requesting gpios and irq and allocating the input
> device.
>
> Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
Applied, thank you.
> ---
> drivers/input/touchscreen/edt-ft5x06.c | 62 ++++++++++---------------------
> 1 files changed, 20 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index af0d68b..acb6b9f 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -623,8 +623,9 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
>
> if (gpio_is_valid(reset_pin)) {
> /* this pulls reset down, enabling the low active reset */
> - error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW,
> - "edt-ft5x06 reset");
> + error = devm_gpio_request_one(&client->dev, reset_pin,
> + GPIOF_OUT_INIT_LOW,
> + "edt-ft5x06 reset");
> if (error) {
> dev_err(&client->dev,
> "Failed to request GPIO %d as reset pin, error %d\n",
> @@ -723,7 +724,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
> return error;
>
> if (gpio_is_valid(pdata->irq_pin)) {
> - error = gpio_request_one(pdata->irq_pin,
> + error = devm_gpio_request_one(&client->dev, pdata->irq_pin,
> GPIOF_IN, "edt-ft5x06 irq");
> if (error) {
> dev_err(&client->dev,
> @@ -734,11 +735,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
> }
>
> tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
> - input = input_allocate_device();
> - if (!tsdata || !input) {
> - dev_err(&client->dev, "failed to allocate driver data.\n");
> - error = -ENOMEM;
> - goto err_free_mem;
> + input = devm_input_allocate_device(&client->dev);
> + if (!input) {
> + dev_err(&client->dev, "failed to allocate input device.\n");
> + return -ENOMEM;
> }
>
> mutex_init(&tsdata->mutex);
> @@ -749,7 +749,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
> error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
> if (error) {
> dev_err(&client->dev, "touchscreen probe failed\n");
> - goto err_free_mem;
> + return error;
> }
>
> edt_ft5x06_ts_get_defaults(tsdata, pdata);
> @@ -776,27 +776,30 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
> error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
> if (error) {
> dev_err(&client->dev, "Unable to init MT slots.\n");
> - goto err_free_mem;
> + return error;
> }
>
> input_set_drvdata(input, tsdata);
> i2c_set_clientdata(client, tsdata);
>
> - error = request_threaded_irq(client->irq, NULL, edt_ft5x06_ts_isr,
> - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> - client->name, tsdata);
> + error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
> + edt_ft5x06_ts_isr,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + client->name, tsdata);
> if (error) {
> dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
> - goto err_free_mem;
> + return error;
> }
>
> error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
> if (error)
> - goto err_free_irq;
> + return error;
>
> error = input_register_device(input);
> - if (error)
> - goto err_remove_attrs;
> + if (error) {
> + sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
> + return error;
> + }
>
> edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
> device_init_wakeup(&client->dev, 1);
> @@ -806,40 +809,15 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
> pdata->irq_pin, pdata->reset_pin);
>
> return 0;
> -
> -err_remove_attrs:
> - sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
> -err_free_irq:
> - free_irq(client->irq, tsdata);
> -err_free_mem:
> - input_free_device(input);
> - kfree(tsdata);
> -
> - if (gpio_is_valid(pdata->irq_pin))
> - gpio_free(pdata->irq_pin);
> -
> - return error;
> }
>
> static int edt_ft5x06_ts_remove(struct i2c_client *client)
> {
> - const struct edt_ft5x06_platform_data *pdata =
> - dev_get_platdata(&client->dev);
> struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
>
> edt_ft5x06_ts_teardown_debugfs(tsdata);
> sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
>
> - free_irq(client->irq, tsdata);
> - input_unregister_device(tsdata->input);
> -
> - if (gpio_is_valid(pdata->irq_pin))
> - gpio_free(pdata->irq_pin);
> - if (gpio_is_valid(pdata->reset_pin))
> - gpio_free(pdata->reset_pin);
> -
> - kfree(tsdata);
> -
> return 0;
> }
>
> --
> 1.7.2.5
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists