[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <52D93FCA.1090202@ti.com>
Date: Fri, 17 Jan 2014 20:05:54 +0530
From: Balaji T K <balajitk@...com>
To: Nishanth Menon <nm@...com>
CC: Geert Uytterhoeven <geert@...ux-m68k.org>,
Tony Lindgren <tony@...mide.com>,
Amarinder Bindra <a-bindra@...com>,
Chris Ball <cjb@...top.org>,
"uclinux-dist-devel@...ckfin.uclinux.org"
<uclinux-dist-devel@...ckfin.uclinux.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Linux-sh list <linux-sh@...r.kernel.org>,
linux-omap <linux-omap@...r.kernel.org>
Subject: Re: Multiple CCR definitions
On Friday 17 January 2014 12:09 AM, Nishanth Menon wrote:
> +linux-omap as well.
>
> On Thu, Jan 16, 2014 at 7:07 AM, Geert Uytterhoeven
> <geert@...ux-m68k.org> wrote:
>> On Tue, Sep 10, 2013 at 11:05 PM, Linux Kernel Mailing List
>> <linux-kernel@...r.kernel.org> wrote:
>>> mmc: omap_hsmmc: use the generic config for omap2plus devices
>>>
>>> OMAP's hs_mmc driver is used for MMC controller operation on many
>>> omap2plus SoCs (OMAP2430, OMAP3, 4, 5 and AM335x).
>>>
>>> Considering that the device tree entries are already present for these,
>>> allow the driver to be built using the config ARCH_OMAP2PLUS rather
>>> than individually adding a config for each SoC to enable the
>>> support.
>>>
>>> Use COMPILE_TEST to enable the build for other platforms.
>>>
>>> Signed-off-by: Amarinder Bindra <a-bindra@...com>
>>> Cc: Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>
>>> Cc: Nishanth Menon <nm@...com>
>>> Acked-by: Felipe Balbi <balbi@...com>
>>> Acked-by: Balaji T K <balajitk@...com>
>>> Signed-off-by: Chris Ball <cjb@...top.org>
>>> ---
>>> drivers/mmc/host/Kconfig | 6 +++---
>>> 1 files changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>> index 84102bc..b8ce939 100644
>>> --- a/drivers/mmc/host/Kconfig
>>> +++ b/drivers/mmc/host/Kconfig
>>> @@ -284,11 +284,11 @@ config MMC_OMAP
>>>
>>> config MMC_OMAP_HS
>>> tristate "TI OMAP High Speed Multimedia Card Interface support"
>>> - depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4
>>> + depends on ARCH_OMAP2PLUS || COMPILE_TEST
>>
>> sh-allmodconfig (http://kisskb.ellerman.id.au/kisskb/buildresult/10477672/):
>> include/linux/omap-dma.h:171:8: error: expected identifier before
>> numeric constant
>> make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1
>>
>> It fails because sh #defines "CCR", which is one of the enum values in
>> include/linux/omap-dma.h.
>>
>> I expect a similar failure on blackfin, which also has #define CCR.
>>
>> Possible solutions:
>> 1. Rename CCR in sh/bfin to e.g. SH_CCR resp. BF_CCR.
>> 2. Use "depends on ARCH_OMAP2PLUS || (COMPILE_TEST && ARM)
omap-dma.h will be needed until all OMAPs are converted to DT only boot.
So depends on ARCH_OMAP2PLUS || (COMPILE_TEST && ARM) looks good to me
>> 3. Stop using include/linux/omap-dma.h, as it says:
>>
>> * Legacy OMAP DMA handling defines and functions
>> *
>> * NOTE: Do not use these any longer.
>> *
>> * Use the generic dmaengine functions as defined in
>> * include/linux/dmaengine.h.
>>
>> Gr{oetje,eeting}s,
>>
>> Geert
>>
>> --
>> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
>>
>> In personal conversations with technical people, I call myself a hacker. But
>> when I'm talking to journalists I just say "programmer" or something like that.
>> -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists